Bang olufsen beosound 9000 инструкция

Bang & Olufsen BeoSound 9000 User Guide

Your key to using BeoSound 9000

Your 9000 is designed for both close-up operation via the BeoSound 9000 operation panel and remote control operation via Beo4.

Whether you place BeoSound 9000 on a table, vertically or horizontally on the wall or on the specially designed BeoSound 9000 stand, you can adjust the position of the operation panel in order to facilitate your operation of the BeoSound 9000.

NOTE!
Please refer to the Reference Book for instructions of how to remove and replace the operation panel.

Compact Disc player

The BeoSound 9000 contains 6 Compact Disc compartments and a carriage moves between compartments enabling CD playback. Move the carriage by pressing the direct CD selection button next to the CD compartment.

When you switch the BeoSound 9000 to stand-by, the carriage will always situate itself next to the operation panel and the CD compartment number 1.

Compact Disc player overview

Load button
The load button is situated in a low position on the BeoSound 9000.
Direct CD selection button
A selection button is situated next to all 6 Compact Disc compartments. Press this button to play the CD in the compartment.

Buttons on the operation panel

The buttons on the operation panel are conveniently grouped according to type of function, so you can easily fi nd your way around the panel while operating the system.

Buttons on the operation panel

A. AUX function.
The button enables you to switch on extra audio equipment.
Stand-by function.
The button switches BeoSound 9000 to stand by.
Sound adjustments. The buttons give access to sound adjustment functions:
Timer functions.
The buttons give access to timer functions:
- TIMER: Sets Timers for when the BeoSound 9000 should begin to play or switch off.
- ON/OFF: On or off decides where a timer will be heard or executed.
- CHECK: Checks your Timers.
- CLEAR: Clears your Timers.
- CLOCK: Sets or displays the built-in clock.
CD functions.
The buttons give access to the CD functions:
- CD: Plays the CD.
- PAUSE: Pauses playback.
- SELECT and EDITING: Program ming sequences of discs and tracks.
- RANDOM and EDIT: Operate special random and edited play functions for the CDs.
- NAMING: Names discs and sequences.
- CLEAR: Clears programmed values.
Radio functions.
The buttons give access to the radio functions:
- RADIO: Plays the radio.
- TUNE, AM/FM and P. NO.: Tune in to stations and number them.
- NAMING: Names stations.
- CLEAR: Clears stations.

What’s on the display

The display keeps you informed about what the BeoSound 9000 is doing and about ongoing operations, e.g. playing a CD sequence named GLENN MILLER.

If PIN appears in the display the fi rst time you activate a function, and you have not received a PIN-code from your Bang & Olufsen retailer, contact your retailer to receive a PIN-code.

Using the CD player

When you have loaded your BeoSound 9000 with 1–6 CDs, you are ready to start playing your CDs.

When you press the CD button to start playing, all information about the CDs will be registered, e.g. the number of tracks. All loaded CDs are then played.

You can change between the different CDs and the individual tracks, to achieve the sequence of tracks you prefer. You can also play CDs and tracks on individual CDs in a random order, using the random function.

After 12 hours of uninterrupted playing, the BeoSound 9000 stops. If you choose to listen to another source, the CD player switches off automatically.

Loading CDs

Pressing the load button raises the glass door. You can load the CDs you want to play or remove the CDs from their compartments.

If the carriage is situated over the CD compart ment where you want to load a new CD, simply press the direct selection button in front of another CD compartment to make the carriage move.

The CD must be loaded with the text side facing you. Hold the CD by its edges and insert the CD (top section). To unload the CD, hold it by its edges and push the CD slightly forward to release it.

CD playback

Start playback of a CD by pressing the OK button in the CD section of buttons. If you want to play a specifi c CD, simply press the direct CD selection button* placed next to the CD compartment.

*The CD selection buttons can be also be used to step through the tracks of your CDs. Press the button once – and you select the CD, press it continuosly – and you step through the tracks of the chosen CD.

Playing tracks in random order

If you select the random play function you will fi nd that the tracks are played in a different order each time the CDs or track series are played.

CD Press to start playing CD
RANDOM Press to display
RANDOM RANDOM ON and cut in the random play function
RANDOM Press twice to display
RANDOM RANDOM OFF and cancel the random play function

If you cancel the random play function while a CD is playing, all the tracks beyond the current track number will be played in chronological order, even if they have already been played while the random play function was cut in.

You can choose to combine the RANDOM function with the EDIT function and play your favourite tracks in a random order. You can also combine these two functions with SELECT and choose to play only your favourite tracks from e.g. two CDs in random order.

You can make BeoSound 9000 play your favourite CDs in a particular sequence. Every time a CD is included in the sequence, the red indicator next to the CD compartment lights up.

If you want to, you can override the chosen disc sequence and listen to a CD not included in the sequence. Press the direct CD selection button next to the CD you want to hear, and playback will start immediately.

You can also choose to leave out a CD which has already been included in the sequence but only if you are still in the SELECT option*.
You press the direct CD selection button again next to a CD you have already included.

Choosing discs to include in a sequence

The CDs you have chosen will start playing in numerical order and continue to play for 12 hours if uninterrupted.

CD Press to start playback of a CD
SELECT Press SELECT and
SELECT SELECT DISC will appear in the display
Press the direct CD selection buttons next to the CDs you want to include…
SELECT Press SELECT to start clearing a sequence and play all six CDs
CLEAR Press to clear the sequence.

*NOTE!
The SELECT option lasts for 25 seconds from when you pressed SELECT. If you press a direct selection button after the SELECT option has ended, the disc you chose will start playback immediately and override your sequence. When it has fi nished playing, BeoSound 9000 will continue playing the sequence you chose before.

Using the radio

To listen to the radio, you must fi rst fi nd and store the frequencies of the radio stations.

You can store up to 60 different radio stations in your BeoSound 9000.

Switch on the radio

When you switch on the radio, it automatically selects the station which you last listened to, indicating on the display which radio program is playing.

RADIO Press to turn on the radio
Press to step through your radio programs
• Press to switch to stand-by

Adjust the volume

If you store a volume level, BeoSound 9000 will start playing at this level each time you switch it on. Please refer to Adjust and store sound settings in the Reference book for further information about adjusting and storing volume levels.

Adjust the sound volume

While you are listening to the radio or CD player, you can of course adjust the sound volume, at any time.

Adjust the volume up or down
MUTE Silences the speakers immediately. Press again to recall the sound

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Bang & Olufsen BeoSound 9000 User Guide

Источник

Bang & Olufsen BEOSOUND 9000 Setup Manual

Manuals
Brands
Bang & Olufsen Manuals
Stereo System
BEOSOUND 9000
Setup manual

Contents
Table of Contents
Bookmarks

Quick Links

Related Manuals for Bang & Olufsen BEOSOUND 9000

Summary of Contents for Bang & Olufsen BEOSOUND 9000

Page 1
B E O S O U N D 9 0 0 0…
Page 3
S T A R T … This Setting-up guide explains Set up your loudspeakers (or, how to set up your BeoSound if the BeoSound 9000 is to be 9000 and make it ready for used in a Bang & Olufsen AV use.
Page 4
P L A C E M E N T As illustrated in this section If you are going to hang the (figs 1 – 7) the BeoSound 9000 BeoSound 9000 on the wall, is designed for a variety of always use the correct size and placements.
Page 5
9000 out of the box we recommend that you, in order to avoid fingermarks on the surfaces, use the two foam Fig. 2: The BeoSound 9000 packing shells placed at each hung flat on the wall in a high end of the BeoSound 9000.
Page 6
> Placement Fig. 4: The BeoSound 9000 Fig. 5: The BeoSound 9000 Fig. 6: The BeoSound 9000 placed flat on a level surface, placed in a slant position on a placed in a near upright e.g. a table or shelf.
Page 7
The CD mechanism is spring – Insert the other end of the suspended in order to make the tool (the arrow-shaped end) BeoSound 9000 ‘party-safe’. By and turn the tool so that the centering the CD mechanism, arrow in each hole points you adjust the tension of the into the correct direction.
Page 8
BeoSound 9000 in running it out from the socket then turn the aerial horizon- any room you like.
Page 9
When you have made all the connections, replace the cover BeoLink to hide the socket compart- connection ment. The cover has two perforated sections, which you can pry off in order to make a hole to run Auxiliary the cables through. Select one aerial equipment in an appropriate position to…
Page 10
When you switch on via the AV setup Power switch red power switch button a tiny If your BeoSound 9000 has been red light appears in the display, set up in an AV system, you indicating that the system is in…
Page 11
In a fully integrated AV system, your BeoSound 9000 acts as a Option 2 Option 0 mere audio source. The sound is reproduced through the speakers in the BeoVision TV – or, as shown here, through a set of active speakers connected to the TV.
Page 12
When you have finished carriage slows down in speed, cleaning the BeoSound 9000, and finally comes to a halt. remember to switch the red Over time dust may build up power switch on again.
Page 13
Handling your CDs CDs should be handled and IMPORTANT! stored with the same care as If you experience any problems conventional records. If the CD when trying to play a particular is always held by its edges and CD always check it for faults placed in its original cassette (scratches, fingerprints, dust when out of the BeoSound…
Page 14
M I S C L . I N F O R M A T I O N The black and yellow label on Environmental information CLASS 1 the compact disc player serves This Bang & Olufsen product LASER PRODUCT as a warning that the apparatus was delivered in a packing made contains a laser system and is to protect and transport the…
Page 16
3505620 1980 Printed in Denmark by Bogtrykkergården a-s, Struer…

Источник

B E O S O U N D 9 0 0 0	1

The BeoSound 9000 is the ultimate music entertainment centre, an impressive CD player with a built-in radio. A technological revelation, a masterpiece of craftsmanship as well as a decorative piece of art.

The system can be placed anywhere you want music – in traditional placements; on a table or hanging on a wall, or in a novel, original placement; on the specially designed, vertical stand. All in all, the choice is entirely up to you.

The BeoSound 9000 represents a new and visual way of experiencing music. Please refer to the quick guide on pages 8-9 to experience ‘what you see is what you hear’…

User’s guide

This User’s guide describes the operation of the BeoSound 9000. Each function described in this guide is accompanied by a set of buttons, situated either to the far left or right of the page, which refer to the buttons on the BeoSound 9000 closeup operation panel.

For most functions, inserts with step-by-step guidance to the Beo4 remote control are also included. These sets of buttons will guide you through the operations step-by-step.

The BeoSound 9000 may be used with various types of active Bang & Olufsen loudspeakers, or it may be used as a music centre in a Bang & Olufsen AV system. This guide applies to both situations.

Note:

Complete setting-up and maintenance instructions are found in the Setting-up guide, which is also enclosed with the BeoSound 9000.

Be sure to keep the Setting-up guide. You will need it for cleaning and maintenance instructions, and when you move or rearrange your BeoSound 9000 setup in the future.

Complete list of contents and page references

4	What you see is what you hear…	23	Using the radio
6	Principles of operation	24	Presetting radio stations
7	Close-up operation panel	25	Clearing presets
8	Quick guide to daily operations	25	Radio program list
10	Beo4 remote control	26	Fine tuning a radio station
		26	Mono/stereo reception
11	Using the Compact Disc player	27	Naming radio programs
12	Loading CDs	28	Playing radio programs
13	Positioning CDs	29	Switching displays
14	CD playback
16	Switching displays	31	Using the Timer
17	Choosing a sequence of discs	32	Programming Timers
18	Playing CDs and tracks in random	34	Checking or clearing Timers
	order	35	Switching the Timer function to
19	Programming a series of tracks for		on or off
	one CD	36	Setting and using the built-in
20	Playing edited CDs		clock
21	Naming CDs	37	Nice to know about Timers
22	Listing CDs
		39	Nice to know
		40	Adjusting sound
		42	Playing auxiliary sources
		43	Music throughout the house
		44	From audio to video – or vice versa

4	W H A T Y O U S E E I S W H A T Y O U H E A R …

Your BeoSound 9000 is versatile,

beautiful, and responsive…

BeoSound 9000 can be compared to a piece of art and will light up any living room. – Its principle is ”What you see is what you hear…” – It mirrors your personal musical and artistic taste. BeoSound 9000 conveys a strong visual expression design-wise and represents an original statement.

BeoSound 9000 gives you perfect sound reproduction and changes tracks and CDs at an unbelievable pace. You will experience 6 Compact Discs as one piece of music – virtually one CD.

Your BeoSound 9000 is designed for both remote control operation via Beo4 and close-up operation via the BeoSound 9000 operation panel.

Bang and Olufsen Beosound 9000 Mk2 Owners manual

6	P R I N C I P L E S O F O P E R A T I O N

	Operation Panel						▲ Load button
	Whether you place BeoSound 9000 on a table,	AUX					The LOAD button is situated in a low position on
	vertically or horizontally on the wall or on the				•	the BeoSound 9000.
	A.
	specially designed BeoSound 9000 stand, you can						Direct CD selection button
	adjust the position of the operation panel in	RADIO				CLEAR
						A selection button is situated next to all 6
	order to facilitate your operation of the			OK
		AM/FM		P. NO.	NAMING	Compact Disc compartments in a low position on
	BeoSound 9000.	TUNE
		the BeoSound 9000. Press this button to play the


	Please refer to the setting-up guide for	CD	PAUSE		EDITING	CLEAR	CD in the compartment.


	instructions of how to remove and replace the			OK
	RANDOM			SELECT	NAMING
	operation panel.	EDIT		Compact Disc player


		ON/OFF				CLEAR	The BeoSound 9000 contains 6 Compact Disc
			OK		compartments and a carriage moves between
	Radio	TIMER	CHECK			CLOCK	compartments and enables CD playback. You
						move the carriage by pressing the direct CD
	The BeoSound 9000 radio only becomes visible	RESET	MUTE		VOL	VOL	selection button next to the CD compartment.
	when it is being used. The display then lights up	OK
	with radio program information.	TREBLE	BASS		BALANCE	LOUDNESS	When you switch the BeoSound 9000 to stand-by,
			the carriage will always situate itself next to

							the operation panel and the CD compartment
							number 1.
							If you choose to place the BeoSound 9000
							vertically, the carriage will move to the top end of
							BeoSound 9000. If you choose to place the
							BeoSound 9000 horizontally, the carriage will
							situate itself next to the operation panel.
	Mains switch						• Stand-by button
							The STAND-BY button is situated in a low position
							on the BeoSound 9000.

Socket for headphones

C L O S E — U P O P E R A T I O N P A N E L	7

General functions for close-up operation

The buttons OK and ▲ and ▼ are included in all the sections of buttons which are illustrated below. These buttons are used together with primary and secondary functions for radio, CD, timer and sound:

OK: Accepts and stores operations and outcomes STEP BUTTONS ▲ and ▼: Change programs and change or identify values for radio tuning, program numbering, CD, timer and sound adjustment functions.

Primary and secondary CD	Primary and secondary	Stand-by function
functions	radio functions	The button switches
The buttons give access to CD	The buttons give access to	the BeoSound 9000
functions:	radio functions:	to stand-by.
CD: Plays the CDs.	RADIO: Plays the radio.
PAUSE: Pauses playback.	TUNE, AM/FM and P.NO.: Tune
SELECT and EDITING:	in to stations and number	A. AUX function
Programming sequences of	them.	The button enables
discs and tracks.	NAMING: Names stations.	you to switch on
RANDOM and EDIT: Operate	CLEAR: Clears stations.	extra audio
special random and edited		equipment.
play functions for the CDs.
NAMING: Names discs and
sequences.
CLEAR: Clears programmed
values.

TREBLE	RESET	TIMER	ON/OFF	RANDOM	CD	TUNE	RADIO	A. AUX
BASS	MUTE	CHECK		EDIT	PAUSE	AM/FM
OK			OK		OK		OK
BALANCE	VOL			SELECT	EDITING	P. NO.
LOUDNESS	VOL	CLOCK	CLEAR	NAMING	CLEAR	NAMING	CLEAR	•

Sound adjustment functions

The buttons give access to sound adjustment functions:

VOL and VOL : Raise and lower the volume level. MUTE: Mutes or activates the loudspeakers.

TREBLE, BASS, BALANCE and LOUDNESS: Regulate the sound from the loudspeakers.

RESET: Resets the settings for sound to their default settings.

Timer functions

The buttons give access to timer functions:

TIMER: Sets timers for when the BeoSound 9000 should begin to play or switch off. ON/OFF: On or off decides where a timer will be heard or executed.

CHECK: Checks your timers. CLEAR: Clears your timers. CLOCK: Sets or displays the inbuilt clock.

Status display

The display keeps you informed about what the BeoSound 9000 is doing and ongoing operations. E.g. playing a CD sequence named GLENN MILLER (see above display).

8	Q U I C K G U I D E T O …

Direct CD selection buttons

Load button

▲Press to raise the glass door

▲Press again to lower the glass door

Press to play a CD

Press to step through CD tracks

▼

Press to resume playback

Loading and playing CDs

You press the LOAD button to raise the glass door and you will now be able to load your CDs.

If the carriage is situated over the CD compartment where you want to load a new CD, simply press the direct selection button next to another CD compartment to make the carriage move to this compartment.

to the left to start playback and step through the tracks on the CD where the carriage is situated.

If you wish to step through the tracks on another CD, you can either step through all the tracks on the current CD and then continue to press the ▲ button, the carriage will then move to the next CD compartment or you can press the direct selection button next to the CD you want to hear.

See page 12 for further information about loading CDs and pages 20-23 for

playback…

… D A I L Y O P E R A T I O N S	9

TREBLE	RESET	TIMER	ON/OFF	RANDOM	CD	TUNE	RADIO	A. AUX
BASS	MUTE	CHECK		EDIT	PAUSE	AM/FM
OK			OK		OK		OK
BALANCE	VOL			SELECT	EDITING	P. NO.
LOUDNESS	VOL	CLOCK	CLEAR	NAMING	CLEAR	NAMING	CLEAR	•

Close-up of the BeoSound 9000 operation panel…

The buttons used for your daily operations are highlighted on the panel.

Switching on and playing the radio

To switch on and play the radio, simply press the buttons shown to the right.

You can step through your radio programs and on the display you will be able to see which radio station you have selected.

On the display you will see the indication RADIO followed by a program number or a program name if you have named the particular program.

See pages 16-17 for further information…

Press to turn on the radio

Press to step through radio programs

Volume adjustments and switching off

The volume level can be turned up or	To switch off the BeoSound 9000, press
down at any time by pressing the	the red stand-by button on the
VOL or VOL volume buttons.	operation panel.

Press to raise the volume

Press to lower the volume

Press to switch to stand-by

10	B E O 4 R E M O T E C O N T R O L

Using the Beo4

The BeoSound 9000 CD-player is operated from a distance via the Beo4 remote control. The Beo4 step-by-step operating sequences are shown as inserts framed in boxes throughout this user’s guide.

The Beo4 remote control operates all the primary functions in the BeoSound 9000 such as switching on the radio or the CD player, changing radio programs, CD tracks or CDs. It also selects programs or CDs to be played, adjusts sound functions, pauses playback and finally switches to stand-by.

The Beo4 remote control also enables you to select specific tracks on CDs, select sequences of specific discs to be played, search forward and backward on CDs, switch on the random order playback and edited order playback functions as well as select auxiliary equipment.

Note: Please refer to the Beo4 User’s guide for further information about the Beo4 principles of operation.

In order to perform certain functions with Beo4, you have to add to the Beo4 list of functions. Throughout this user’s guide you will be informed when such an addition is called for. Please refer to your Beo4 User’s guide and the chapter Customizing your Beo4 for further instruction.

Nice to know…

In the step-by-step operating sequences, the buttons on the Beo4 and cues in the display will be illustrated like this:

	CD		Rectangular buttons for e.g.
			sources, numbers, and volume
			regulation
			Buttons incorporated in the large
			star-shaped button for stepping up
			or down and forwarding and
			rewinding
	GO		A small, round GO button incorpo-
			rated in the large star-shaped
			button which stores, accepts and
			executes control operations
			Coloured buttons incorporated in
			the star-shaped button for special
			functions
			The double-button means ‘press
	LIST
			repeatedly’ on LIST

RANDOM		Cues in the Beo4 display

TV	LIGHT	RADIO
SAT	DVD	CD
V TAPE	RECORD	A TAPE

7	8	9
4	5	6
1	2	3
TEXT	0	MENU

LIST

STOP

The Beo4 remote control is not a standard component of the BeoSound 9000. Beo4 is available as an optional extra from your Bang & Olufsen dealer.

U S I N G T H E C O M P A C T D I S C P L A Y E R	11

12Loading CDs

13Positioning CDs

14CD playback

16Switching displays

17Choosing a sequence of discs

18Playing CDs and tracks in random order

19Programming a series of tracks for one CD

20Playing edited CDs

21Naming CDs

22Listing CDs

U S I N G T H E C O M P A C T D I S C P L A Y E R

be loaded with the text side facing CD by its edges and insert the CD

. To unload the CD, hold it by its push the CD a little forward to release

Press to lower the glass door

Press to lower the door and start playing

Loading CDs

Pressing the load button raises the glass door. You can then remove the CDs from their compartments and load the CDs you want to play. Always load the CD with the text side facing you and then push the CD into place!

Press the load button again to lower the glass door. You can also press the CD button to lower the door and the CD where the carriage is situated will start playing at once.

The carriage will situate itself in

various positions depending on the placement you have chosen for your BeoSound 9000. Please refer to the

If the glass door is open and the carriage is placed over a CD you want to remove, simply move the carriage to another position by pressing the direct CD selection button next to a compartment.

BEO4

CD Press to play a CD

ttPress tt to move the carriage up or to the right

ssPress ss to move the carriage down or to the left

Alternatively, key in the CD compartment number you want the carriage to move to.

Nice to know…

•The carriage registers whether the CD compartments you ask for are empty or not, and until the glass door is opened again, it will remember the state of the compartments.

leave the glass door open, it will close automatically after 5 minutes.

•If BeoSound 9000 is left paused or stopped for more than 30 minutes, it automatically switches to stand-by.

Positioning CDs

By positioning your individual CDs, you create your own design with a particular collection of CDs on BeoSound 9000. When you load CDs on the BeoSound 9000, you can adjust their positions manually so that for example the graphical design and the text on the actual CD present themselves to your satisfaction.

When you have loaded a CD and pushed it in place in a CD compartment, you adjust the position of the CD manually. Then you move the carriage to this particular CD and access the positioning function for CDs in order to store the position you have chosen. Please refer to the procedure to the right of this page.

If you store a position for each CD, the BeoSound 9000 will now remember these positions. No matter how many times you remove and reload the CDs, the individual CDs will be returned to these positions every time they stop turning*.

If you wish to change or cancel the positions of your CDs while still in the positioning function, you press the CLEAR button instead of OK to cancel the position you have already chosen.

*Note: Some particular CDs do not contain the information which is required by the BeoSound 9000 in order to store positions for CDs. Therefore you may experience that the position you have attempted to store for a CD is not adhered to by the BeoSound 9000. You will of course still be able to play the CD in question.

Load and adjust a CD manually…
Then press the direct CD selection
button next to this CD to move the
carriage to the CD…
then
Press to save the position for the	SELECT
CD while it is playing
	SELECT
	then
Press to store the position you	OK
chose for the CD when it was loaded
Repeat this procedure for all the CDs
you have loaded…

If you want to clear the position for
a CD, move the carriage to the
CD in question…
Press to access the positioning	SELECT
function to clear the position
	SELECT
	then
Press to clear the position	CLEAR

14 > Using the Compact Disc player

▲Press to play the next track on a CD

▼Press to play the same track again or press twice to play the previous track

PAUSE Press to pause playback

CD Press to resume playing

VOL Press to raise the volume

VOL Press to lower the volume

Press to silence the speakers

Press again to recall the sound

•Press to switch to stand-by

CD playback

When you press the CD button on the operation panel, the CD where the carriage is situated starts to play. You can also start playback by pressing the OK button in the CD section of buttons.

If you want to play a specific CD, simply press the direct CD selection button placed next to the CD compartment. The carriage then moves to the CD you have chosen, and playback starts.

While a CD is playing, you can step through the tracks by pressing the step buttons ▲ or ▼. When you have stepped through the tracks of one CD, pressing the step button ▲ will start playback of the first track on the next CD. You can now step through the tracks of this CD.

When your first CD has finished playing, the carriage automatically moves to the next CD you have loaded and starts playing this new CD.

After 12 hours of uninterrupted playing, the BeoSound 9000 stops. If you choose to hear another source, the CD player switches off automatically.

Nice to know…

When you play your BeoSound 9000 CD player, a tiny red indicator is lit beside all the CD compartments where you have loaded a CD.

If you for example choose a sequence of discs to be played, only the indicators next to the CDs you have chosen will be lit even though you have loaded six CDs.

	CD		Press to start playback of a CD
			Press to change tracks on a CD
or
	tt		Press to change to the next or
or		previous disc
	ss
			Press to choose a disc number
1
through		directly

6
			Press list to display TRACK* to
	LIST
			choose a specific track
then

			Press to choose a track number
1
through

9
or
			Press to choose a track directly
or

BEO4

Press to search forward on a disc or

Press to search backward

STOP Press to pause playback

•Press to switch to stand-by

*Note: In order to display TRACK on Beo4, you have to add this function to its list of functions, please refer to your Beo4 user’s guide and the chapter Customizing your Beo4 for further instruction.

Loading…

Источник

ManyManuals

Categories
Brands

Home
Bang & Olufsen
CD players
BEOSOUND 9000

Owner’s manuals and user’s guides for CD players Bang & Olufsen BEOSOUND 9000.
We providing 2 pdf manuals Bang & Olufsen BEOSOUND 9000 for download free by document types: User Manual

Bang olufsen BEOSOUND 9000 User Manual (48 pages)

Brand: Bang-olufsen | Category: CD players | Size: 0.60 MB |

German

Bedienungsanleitung

SIE SEHEN, WAS SIE HÖREN…

BEDIENUNGSGRUNDSÄTZE

DAS BEDIENFELD IM DETAIL

KURZANLEITUNG…

∧ bzw. VOL ∨ erhöht oder ver

Die Benutzung von Beo4

Einlegen von CDs

Positionsfestlegung der CDs

CD-Wiedergabe

Umschalten des Displays

(Zufallswiedergabe)

▼-Taste aus

Wiedergabe editierter CDs

Benennung von CDs

Auflistung der CDs

Speicherung von Radiosendern

Mono/Stereo-Empfang

Benennung von Radiosendern

Spielen der Radioprogramme

Umschaltung zwischen Displays

Timer-Programmierung

Einstellung der Tonpegel

∧ bzw. VOL ∨;

Musik auf Schritt und Tritt

Fachhändler berät Sie gerne

RANDOM OFF

EDIT OFF

TIMER OFF

3508086 0999

Bang olufsen BEOSOUND 9000 User Manual (48 pages)

Brand: Bang-olufsen | Category: CD players | Size: 0.60 MB |

Dutch

Handleiding

WAT U ZIET IS WAT U HOORT…

▲ Laadtoets

∧ en VOL∨: verhoogt, resp

Laden en afspelen van CD’s

∧ of VOL ∨ te

Gebruik Beo4

Inleggen van CD’s

Positie van de CD’s

CD weergave

Omschakelen display

Kiezen van de volgorde

▼ om willekeurig

▲ te drukken, of weglaten

▼ te drukken. Zodra U op ▲ of

Afspelen CD-selecties

Benoemen van CD’s

CD-archief

Voorinstellen radiozenders

Mono/stereo ontvangst

Benoemen van radiozenders

Luisteren naar de radio

NOTITIES

Timer programmeren

▼ om deze dag weg te

▲ of ▼ te drukken en TIMER

▲ of ▼ om NEXT

Corrigeren van het geluid

∧ te drukken

Weergeven van extra bronnen

Muziek door het hele huis

OVERZICHT STATUS-DISPLAYS

RANDOM OFF

EDIT OFF

TIMER OFF

3508087 0999

More products and manuals for CD players Bang & Olufsen

Models	Document Type
BeoSound Ouverture	User’s Guide Bang & Olufsen BeoSound Ouverture User`s guide [en] , 44 pages
BeoSound Ouverture	User Manual BeoSound Ouverture, 44 pages
BeoSound Century	User’s Guide Bang & Olufsen BeoSound Century User`s guide, 29 pages
BeoSound 3000	Service Manual Bang & Olufsen BeoSound 3000 Service manual, 68 pages
BeoSound Ouverture	User Manual B E O S O U N D O U V E R T U R E, 14 pages
BEOSOUND 5	User Manual Bang & Olufsen BEOSOUND 5 User’s Manual, 20 pages
BeoSound Ouverture	User Manual Benutzeranleitung — Bang & Olufsen Leipzig, 44 pages
BeoSound Ouverture	User Manual BeoSound Ouverture, 44 pages

Bang & Olufsen devices

IP phones
Tuner
CD players
Digital Video Recorders (DVR)
Access control readers

Top manuals
Top Devices
Categories
Faxback
Epoq
Alpine Innovation
SureLock
Elv
Eltax Unknown
Midland Radio Two-way radios
Emprex DVD players
NEC Surge protectors
Topcom Telephones
Lg 47LB6300
Polycom KIRK 5040
Black & Decker LDX120
Samsung GT-E2600
Samsung WF7520SAV
Abus FU8002 Datasheet

Dell PowerVault NX300 User Manual

Braun D 9525 User Manual

Philips HMP3000/12 User Manual

AJA kona3 User Manual
Brands
Privacy
DCMA
Contact Us
About Us

Faxback
Epoq
Alpine Innovation
SureLock
Elv
Eltax Unknown
Midland Radio Two-way radios
Emprex DVD players
NEC Surge protectors
Topcom Telephones
Lg 47LB6300
Polycom KIRK 5040
Black & Decker LDX120
Samsung GT-E2600
Samsung WF7520SAV
Abus FU8002 Datasheet

Dell PowerVault NX300 User Manual

Braun D 9525 User Manual

Philips HMP3000/12 User Manual

AJA kona3 User Manual