EDIFIER W800BT Wireless Bluetooth Over-ear Headphones Manual
Product Description and Accessories
USB charging cable
3.5mm audio cable
Operational Guide
Charge
During using, if only red light ashes, it indicates the headphones are at low battery level, please use them after fully charged.
Red light steady lit = charging
Red light o =fully charged
Rated input: 5V
500mA
The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion.
If the product with lithium battery has not been used for long periods of time, please charge it at least once per 3 months.
Power ON/OFF
Bluetooth Connection
- When powered on and not connected, press and hold the multi-function button for 2 seconds until the red and blue light ashes alternately, then the headphones enter pairing state.
- When powered o, press and hold the multi-function button for approx. 5 seconds until the red and blue light ashes alternately, then the headphones enter pairing state;
- Set your mobile phone to search for and connect to «EDIFIER W800BT», after pairing is successful, the blue light will ash slowly.
Connect to Two Bluetooth Devices Simultaneously
- Pair the headphones with the rst device;
- Restart the headphones: press and hold the multi-function button for 5 seconds to enter pairing state and pair with the second device;
- Operate the rst device to pair with the headphones again, then they are successfully connected to two devices simultaneously.
Functional Operation Instructions
Music Playback
Call
- Clear pairing records: when powered on and not connected, press and hold the «+» and «-» buttons simultaneously for 5 seconds, wait until the blue light flashes rapidly, then the pairing records have been cleared.
FAQs
Red light instead of blue light ashes.
- The headphones are at low battery level, please recharge the headphones.
Red light is o during charging.
- Ensure the charging device is correctly connected with the headphones.
- When the headphones have not been used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the red light will be lit.
No sound
- Check if the headphones are operating.
- Check if the headphones volume is at an appropriate level.
- Check if the headphones are correctly connected with mobile phone.
- Check if the headphones are operating within a normal working range.
Call quality of the headphones are not good.
- Check if mobile phone is in an area with strong signal.
- Please ensure the headphones are within effective distance (10m) and no obstacle between the headphones and mobile phone.
When playing music, cannot control pause/play/previous track/ next track via headphones.
- Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.
Maintenance
During using, please read the following suggestions carefully.
- Keep the product away from humid places to avoid a ecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
- Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and deform plastic components.
- Do not put the product in cold places to avoid damaging internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch product surface to avoid damaging shell and a ecting looking.
If the product cannot operate properly, please send it to your qualified maintenance agency.
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for di erent applications. Pictures and illustrations shown on this manual may be slightly di erent from actual product. Picture for reference only, actual product prevails.
EDIFIER International Limited
www.edifier.com 
2019 Edifier International Limited. All rights reserved.
Printed in China
Documents / Resources
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download EDIFIER W800BT Wireless Bluetooth Over-ear Headphones Manual
Product Description and Accessories
USB charging cable
3.5mm audio cable
Operational Guide
Charge
During using, if only red light ashes, it indicates the headphones are at low battery level, please use them after fully charged.
Red light steady lit = charging
Red light o =fully charged
Rated input: 5V500mA
![]()
The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion.
If the product with lithium battery has not been used for long periods of time, please charge it at least once per 3 months.
Power ON/OFF
Bluetooth Connection
- When powered on and not connected, press and hold the multi-function button for 2 seconds until the red and blue light ashes alternately, then the headphones enter pairing state.
- When powered o, press and hold the multi-function button for approx. 5 seconds until the red and blue light ashes alternately, then the headphones enter pairing state;
- Set your mobile phone to search for and connect to «EDIFIER W800BT», after pairing is successful, the blue light will ash slowly.
Connect to Two Bluetooth Devices Simultaneously
- Pair the headphones with the rst device;
- Restart the headphones: press and hold the multi-function button for 5 seconds to enter pairing state and pair with the second device;
- Operate the rst device to pair with the headphones again, then they are successfully connected to two devices simultaneously.
Functional Operation Instructions
Music Playback
Call
- Clear pairing records: when powered on and not connected, press and hold the «+» and «-» buttons simultaneously for 5 seconds, wait until the blue light flashes rapidly, then the pairing records have been cleared.
FAQs
Red light instead of blue light ashes.
- The headphones are at low battery level, please recharge the headphones.
Red light is o during charging.
- Ensure the charging device is correctly connected with the headphones.
- When the headphones have not been used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the red light will be lit.
No sound
- Check if the headphones are operating.
- Check if the headphones volume is at an appropriate level.
- Check if the headphones are correctly connected with mobile phone.
- Check if the headphones are operating within a normal working range.
Call quality of the headphones are not good.
- Check if mobile phone is in an area with strong signal.
- Please ensure the headphones are within effective distance (10m) and no obstacle between the headphones and mobile phone.
When playing music, cannot control pause/play/previous track/ next track via headphones.
- Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.
Maintenance
During using, please read the following suggestions carefully.
- Keep the product away from humid places to avoid a ecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
- Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and deform plastic components.
- Do not put the product in cold places to avoid damaging internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch product surface to avoid damaging shell and a ecting looking.
If the product cannot operate properly, please send it to your qualified maintenance agency.
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for di erent applications. Pictures and illustrations shown on this manual may be slightly di erent from actual product. Picture for reference only, actual product prevails.
Product Description and Accessories
USB charging cable
3.5mm audio cable
Operational Guide
Charge
During using, if only red light ashes, it indicates the headphones are at low battery level, please use them after fully charged.
Red light steady lit = charging
Red light o =fully charged
Rated input: 5V500mA
The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion.
If the product with lithium battery has not been used for long periods of time, please charge it at least once per 3 months.
Power ON/OFF
Bluetooth Connection
- When powered on and not connected, press and hold the multi-function button for 2 seconds until the red and blue light ashes alternately, then the headphones enter pairing state.
- When powered o, press and hold the multi-function button for approx. 5 seconds until the red and blue light ashes alternately, then the headphones enter pairing state;
- Set your mobile phone to search for and connect to «EDIFIER W800BT», after pairing is successful, the blue light will ash slowly.
Connect to Two Bluetooth Devices Simultaneously
- Pair the headphones with the rst device;
- Restart the headphones: press and hold the multi-function button for 5 seconds to enter pairing state and pair with the second device;
- Operate the rst device to pair with the headphones again, then they are successfully connected to two devices simultaneously.
Functional Operation Instructions
Music Playback
Call
- Clear pairing records: when powered on and not connected, press and hold the «+» and «-» buttons simultaneously for 5 seconds, wait until the blue light flashes rapidly, then the pairing records have been cleared.
FAQs
Red light instead of blue light ashes.
- The headphones are at low battery level, please recharge the headphones.
Red light is o during charging.
- Ensure the charging device is correctly connected with the headphones.
- When the headphones have not been used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the red light will be lit.
When playing music, cannot control pause/play/previous track/ next track via headphones.
- Please ensure the paired device support AVRCP (Audio/Video Remote Control Profile) profile.
Maintenance
During using, please read the following suggestions carefully.
- Keep the product away from humid places to avoid a ecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
- Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and deform plastic components.
- Do not put the product in cold places to avoid damaging internal circuit board.
- Do not dismantle the product. Non-professional personnel may damage the product.
- Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
- Do not use drastic chemicals or cleaner to clean the product.
- Do not use sharp objects to scratch product surface to avoid damaging shell and a ecting looking.
If the product cannot operate properly, please send it to your qualified maintenance agency.
NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for di erent applications. Pictures and illustrations shown on this manual may be slightly di erent from actual product. Picture for reference only, actual product prevails.
EDIFIER International Limited
www.edifier.com 2019 Edifier International Limited. All rights reserved.
Printed in China
Documents / Resources
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download EDIFIER W800BT Wireless Bluetooth Over-ear Headphones Manual
Стереонаушники Bluetooth EDIFIER W800BT Plus
Функциональные инструкции по эксплуатации
Описание кнопок
Bluetooth спаривание
- Когда наушники выключены, нажмите и удерживайте многофункциональную кнопку около 5 секунд, красный и синий индикаторы быстро мигают.
- Найдите и подключитесь к «EDIFIER W800BT Plus», после успешного сопряжения синий индикатор будет медленно мигать.
Примечание: Когда наушники включены и не подключены, нажмите и удерживайте многофункциональную кнопку около 2 секунд, чтобы войти в сопряжение по Bluetooth.
Восстановление заводских настроек
Когда питание включено и не подключено, нажмите и удерживайте кнопки «+» и «-» одновременно около 5 секунд, чтобы очистить записи сопряжения и восстановить заводские настройки, синий индикатор быстро мигает.
Примечание: Изображения предназначены только для иллюстративных целей и могут отличаться от реального продукта.
Эдифер Интернэшнл Лимитед
Почтовый ящик 6264
Главный почтамт
香港（中國）
www.edifier.com
© 2020 Edifier International Limited. Все права защищены.
Напечатано в Китае
ВНИМАНИЕ:
При необходимости технического усовершенствования и обновления системы информация, содержащаяся в настоящем документе, может время от времени изменяться без предварительного уведомления.
Продукты EDIFIER будут адаптированы для различных приложений.
Изображения и иллюстрации, представленные в этом руководстве, могут немного отличаться от реального продукта. В случае обнаружения каких-либо различий преимущественную силу имеет фактический продукт.
Модель: EDF200040
ИБ-200-W800BP-00 V1.0
Посетите EDIFIER webсайт с полной версией руководства пользователя: www.edifier.com
Словесный знак и логотипы Bluetooth® являются зарегистрированными товарными знаками, принадлежащими Bluetooth SIG, Inc., и любое использование этих знаков компанией EDIFIER осуществляется по лицензии. Другие товарные знаки и торговые наименования принадлежат их соответствующим владельцам.
Декларация для ЕС
Диапазон частот: 2.402 ГГц ~ 2.480 ГГц
Выходная мощность RF: 20 дБм (EIRP)
Ограничений по использованию нет.
Вход: 5V 1A
Идентификатор FCC: Z9G-EDF118
ИС: 10004A-EDF118
Документы / Ресурсы
Рекомендации
Bluetooth-гарнитура Edifier W800BT Plus белый
2.0, охватывающие, 20 Гц — 20000 Гц, 32Ω, Bluetooth, проводной, 5.1, кабель — 1.2 м
подробнее
1.3k
Цвет:
Код товара: 4793750
Инструкция по шагам:
1. Зарядите наушники Edifier W800BT Plus через кабель USB.
2. Включите Bluetooth на своем компьютере.
3. Нажмите и удерживайте кнопку включения на наушниках, пока не загорится синяя индикаторная лампа и не начнется мигать красный и синий светодиоды.
4. Найдите наушники в списке доступных устройств Bluetooth на своем компьютере и нажмите кнопку «Соединить».
5. Если запросится пароль, введите «0000».
6. Подключение завершено.
Дополнительные советы:
— Убедитесь, что наушники Edifier W800BT Plus находятся в режиме Bluetooth-сопряжения.
— Если наушники не можут быть найдены на вашем компьютере, попробуйте переместиться ближе к нему.
— Если вам нужно подключиться к другому устройству, отключите соединение с компьютером, нажав и удерживая кнопку включения на наушниках, пока светодиоды не загорятся красным цветом.
инструкцияEdifier W800BT
www.edier.com
Bluetooth® Stereo Headphones
Посмотреть инструкция для Edifier W800BT бесплатно. Руководство относится к категории наушники, 1 человек(а) дали ему среднюю оценку 7.5. Руководство доступно на следующих языках: английский. У вас есть вопрос о Edifier W800BT или вам нужна помощь? Задайте свой вопрос здесь
Главная
| Edifier | |
| W800BT | W800BT | |
| наушники | |
| 6923520225224 | |
| английский | |
| Руководство пользователя (PDF) |
Производительность
| Тип продукта | Наушники |
| Стиль ношения | Оголовье |
| Рекомендованное применение | — |
| Цвет товара | Черный |
| Кнопки управления | Multi-key, Play/pause, Volume +, Volume — |
| Регулятор громкости | Кнопка |
| Тип управления | Кнопки |
| Отсоединяемый кабель | Да |
| Подсветка | Нет |
Порты и интерфейсы
| Технология подключения | Проводной и беспроводной |
| Разъем 3,5 мм | Да |
| Bluetooth | Нет |
| Профили Bluetooth | A2DP, AVRCP, HFP, HSP |
| Версия Bluetooth | 4.0 |
| Дальность действия (беспроводная) | 10 m |
Наушники
| Тип наушников | Накладные |
| Частота наушников | 20 — 20000 Hz |
| Полное сопротивление | 32 Ω |
| Чувствительность наушников | 100 dB |
| Юнит динамика | 400 mm |
| Тип магнита | Неодим |
Микрофон
Батарея
| Питание от батареи | Да |
| Тип батареек | Встроенная батарея |
| Емкость батареи | 1400 mAh |
| Время непрерывного воспроизведения аудио | 35 h |
| Время подзарядки батареи | 3 h |
| Время работы в режиме ожидания | 800 h |
| Входное напряжение (наушники) | 5 V |
| Входной ток (наушники) | 0.5 A |
показать больше
Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Edifier W800BT.
Когда звук считается слишком громким?
Уровень звука выше 80 децибел может нанести вред слуху. Уровень звука выше 120 децибел может нанести прямое повреждение слуху. Вероятность повреждения слуха зависит от частоты и продолжительности прослушивания.
Можно ли с помощью наушники совершать звонки без использования рук?
В более новые наушники обычно встроен небольшой микрофон, позволяющий не использовать руки.
Что такое шумоподавление?
Технология шумоподавления обеспечивает снижение уровня окружающего шума.
Что такое Bluetooth?
Bluetooth — это способ обмена данными по беспроводной сети между электронными устройствами с помощью радиоволн. Расстояние между двумя устройствами обменивающимися данными в большинстве случаев составляет не более десяти метров.
Сколько времени нужно, чтобы зарядить аккумулятор Edifier W800BT?
Нужно 3 h чтобы зарядить аккумулятор Edifier W800BT.
Инструкция Edifier W800BT доступно в русский?
К сожалению, у нас нет руководства для Edifier W800BT, доступного в русский. Это руководство доступно в английский.
Не нашли свой вопрос? Задайте свой вопрос здесь