D link dir 300 инструкция на русском языке

1. Manuals
2. Brands
3. D-Link Manuals
4. Wireless Router
5. DIR-300 — Wireless G Router
6. User manual

Quick Links

• Page 2: Table Of Contents

  DDNS Setting ……………45 Dynamic (Cable) ………….19 System Check ……………46 PPPoE (DSL) …………..20 Schedules …………….47 PPTP ………………21 Log Settings …………….48 L2TP ………………22 Device Info …………….49 Big Pond …………….23 Log ……………….50 Static (assigned by ISP) ……….24 Wireless Setup …………..25 D-Link DIR-300 User Manual…

• Page 3
  Setting Up a Configured Router ……….66 Changing the Computer Name and Joining a Workgroup .67 Configuring the IP Address in Vista ……….69 Setting Up a Connection or Network Wirelessly …..72 Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK) ………………..77 D-Link DIR-300 User Manual…

• Page 4: Package Contents

  Note: Using a power supply with a different voltage rating than the one included with the DIR-300 will cause damage and void the warranty for this product. Note: Always attach the power cord plug to the power supply, before inserting the power cord and connected power supply to the wall outlet.

• Page 5: Introduction

  D-Link, the industry leader in wireless networking, introduces another breakthrough in wireless connectivity. The D-Link Wireless G DIR-300 Router which is capable of transferring data with a maximum wireless signal rate of up to Mbps* in the .GHz frequency — the same wireless frequency as 80.11b. The D-Link DIR-300 Wireless Router also offers four Ethernet ports to support multiple computers.

• Page 6: Features

  The performance of this 80.11g wireless router gives you the freedom of wireless networking at speeds x faster than 80.11b. • Compatible with 802.11b and 802.11g Devices — The DIR-300 is still fully compatible with the IEEE 80.11b standard, so it can connect with existing 80.11b PCI, USB and Cardbus adapters.

• Page 7: Hardware Overview

  Receptor for the Power Adapter. The Auto MDI/MDIX WAN LAN Ports port is the connection for the Connect Ethernet devices such as Ethernet cable to the Cable or computers, switches, and hubs. DSL modem. D-Link DIR-300 User Manual…

• Page 8: Leds

  A solid light indicates a connection to an Ethernet- enabled computer on ports 1-. This LED blinks during data transmission. Power LED Status LED A solid light indicates a proper A blinking light indicates that the connection to the power supply. DIR-300 is ready. D-Link DIR-300 User Manual…

• Page 9: Installation

  If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Ethernet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-300 User Manual…

• Page 10: Wireless Installation Considerations

  1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum — each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

• Page 11: Connect To Cable/Dsl/Satellite Modem

  8. Verify the link lights on the router. The power light, WAN light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. Skip to page 14 to configure your router. D-Link DIR-300 User Manual…

• Page 12: Connect To Another Router

  Section — Installation Connect to Another Router If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network: •…

• Page 13
  7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the WAN port of the D-Link router. 8. You may now use the other three LAN ports to connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router.

• Page 14: Configuration

  Section 3 — Configuration Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1).

• Page 15: Setup Wizard

  Setup window to quickly set up your router. Click Internet Connection Setup Wizard, you will be directed to the first window of the wizard. Click Next to continue. Create a new password and then click Next to continue. D-Link DIR-300 User Manual…

• Page 16
  Clone Your PC’s MAC Address and then click Next to continue. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. D-Link DIR-300 User Manual…
• Page 17
  If you selected PPTP, enter your PPTP username and password. Click Next to continue. If you selected LTP, enter your LTP username and password. Click Next to continue. D-Link DIR-300 User Manual…
• Page 18
  If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. Click Connect to save your settings. Please allow 1-2 minutes for rebooting. When the router has finished rebooting, the opening window will be displayed. D-Link DIR-300 User Manual…

• Page 19: Internet Setup

  Enter the Primary DNS (Domain Name Server) server IP address assigned by your ISP. Secondary DNS: This is optional. Maximum Transmission Unit — You may need to change the MTU for optimal performance with your specific ISP. MTU: D-Link DIR-300 User Manual…

• Page 20: Pppoe (Dsl)

  Auto-reconnect. MTU: Maximum Transmission Unit — You may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Connection Mode Select either Always-on, Manual, or Connect-on Select: demand. D-Link DIR-300 User Manual…

• Page 21: Pptp

  Time: connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. MTU: Maximum Transmission Unit — You may need to change the MTU for optimal performance. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link DIR-300 User Manual…

• Page 22: L2Tp

  To disable this feature, enable Auto-reconnect. MTU: Maximum Transmission Unit — You may need to change the MTU for optimal performance with your specific ISP. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link DIR-300 User Manual…

• Page 23: Big Pond

  MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the router. It is not recommended that you change the default MAC address unless required by your ISP. D-Link DIR-300 User Manual…

• Page 24: Static (Assigned By Isp)

  Enter the Primary DNS server IP address assigned by Primary DNS your ISP. Address: This is optional. Secondary DNS Address: Maximum Transmission Unit — you may need to change MTU: the MTU for optimal performance with your specific ISP. 1492 is the default MTU. D-Link DIR-300 User Manual…

• Page 25: Wireless Setup

  WEP, WPA, WPA2, and WPA/WPA2 wireless security mode options. Click Next to continue. Enter a Wireless Network Name in the textbox, which is also know as the SSID, and then click Next to continue. D-Link DIR-300 User Manual…

• Page 26
  Save to continue. The Router will save your new settings and reboot. When it is finished after 1-2 minutes, the opening Wireless Setup window is displayed. D-Link DIR-300 User Manual…
• Page 27
  Check this option if you would not like the SSID of your wireless network to be broadcasted by the DIR-300. If this option is checked, Wireless: the SSID of the DIR-300 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-300 in order to connect to it.
• Page 28
  NOTE: It is recommended to enable encryption on your wireless Router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. D-Link DIR-300 User Manual…
• Page 29
  WPA, WPA, or WPA/WPA2 (whichever of the three options you have selected above) on your adapter and enter the same network key as you did on the router. D-Link DIR-300 User Manual…
• Page 30
  RADIUS server. 1812 is the default port. 6. Next to Shared Secret, enter the security key. 7. If you have a secondary RADIUS server, enter its IP address, port, and secret key. 8. Click Save Settings to save your settings. D-Link DIR-300 User Manual…

• Page 31: Lan Setup

  Check the box to transfer the DNS server information Enable DNS Relay: from your ISP to your computers. If unchecked, your computers will use the router for a DNS server. Refer to the next page for DHCP information. D-Link DIR-300 User Manual…

• Page 32: Dhcp Server Settings

  Section 3 — Configuration DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-300 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.”…

• Page 33: Time And Date

  Daylight Click Sync. your computer’s time settings to copy Saving: your PC’s time settings. Tick the “Automatically synchronize with D-Link’s Server Internet time server” checkbox and then use the drop- Used: down menu to select an NTP Server. NTP is short for Network Time Protocol.

• Page 34: Parental Control

  The schedule of time when the parental control filter will be enabled. The schedule may be set to Always, Schedule: which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-300 User Manual…

• Page 35: Port Forwarding

  Start Port/ Enter the port or ports that you want to open. If you End Port: want to open one port, enter the same port in both boxes. Traffic Type: Select TCP, UDP, or Any D-Link DIR-300 User Manual…

• Page 36: Application Rules

  Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-300. Rule: Check the box to enable the rule.

• Page 37: Access Control

  The schedule of time when the network filter will be Schedule: enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Maintenance > Schedules section. D-Link DIR-300 User Manual…

• Page 38: Firewall & Dmz

  This section will allow you to set up a DMZ host and to set up firewall rules. If you have a client PC that cannot run Internet applications properly from behind the DIR-300, then you can set the client up for unrestricted Internet access.

• Page 39: Advanced Wireless

  Always: CTS will always be used to make sure the wireless LAN is clear before sending data. Auto: CTS will monitor the wireless network and automatically decide whether to implement CTS based on the amount of traffic and collisions that occurs on the wireless network. 802.11g Only Mode: Tick this checkbox to restrict access to 80.11g devices only. D-Link DIR-300 User Manual…

• Page 40: Advanced Network

  UPNP provides compatibility with networking equipment, software and peripherals. Enable WAN Unchecking the box will not allow the DIR-300 to Ping Respond: respond to Pings. Blocking the Ping may provide some extra security from hackers. Tick this checkbox to allow the WAN port to be “Pinged”.

• Page 41: Routing

  The IP address of the packets that will take this route. Subnet Mask: The subnet of the IP address of the packets that will take this route. Gateway: Specifies the next hop to be taken if this route is used. D-Link DIR-300 User Manual…

• Page 42: Administrator Login Name

  Router. Putting an asterisk (*) into this field would present a security risk and is not recommended. The port number used to access the DIR-300. For example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the DIR-300 Port: and 8080 is the port used for the Web-Management interface.

• Page 43: Save And Restore

  If you want to save the current router configuration settings, use the Save button above. Reboots: Click the Reboots button on the left side of the window to restart the Router. D-Link DIR-300 User Manual…

• Page 44: Firmware Update

  You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com.

• Page 45: Ddns Setting

  Dyn.Dns.org(free), and Dyn.Dns. org(Static). Host Name: Enter the host name of the DDNS server. Username: Enter the username given to you by your DDNS server. Password: Enter the password or key given to you by your DDNS server. D-Link DIR-300 User Manual…

• Page 46: System Check

  Ping Test: The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. D-Link DIR-300 User Manual…

• Page 47: Schedules

  Tick this check box if the new schedule rule applies to the full -hour period. Start Time/ If the new schedule rule does not apply to the full End Time: -hour period, untick the previous checkbox and then enter a specific beginning and ending time. D-Link DIR-300 User Manual…

• Page 48: Log Settings

  Click on the Save button link on this window to save the log file to your local hard drive. Log Type: Tick the checkbox(es) of the type of log information requested: System Activity, Debug Information, Attacks, Dropped Packets, and Notice. D-Link DIR-300 User Manual…

• Page 49: Device Info

  Device Info This window displays the current information for the DIR-300. It will display the LAN, WAN, and Wireless information. If your WAN connection is set up for a Dynamic IP address then a DHCP Release button and a DHCP Renew button will be displayed.

• Page 50: Log

  View the last page of the log. Previous: View the previous page. Next: View the next page. Clear: Clear the log. Link to Log Click this button to go directly to the Log Settings Settings: window (Maintenance > Log Settings). D-Link DIR-300 User Manual…

• Page 51: Statistics

  Section 3 — Configuration Statistics The window below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-300 on both the WAN and the LAN ports. The traffic counter will reset if the device is rebooted.

• Page 52: Wireless

  Section 3 — Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless client. D-Link DIR-300 User Manual…

• Page 53: Help

  Section 3 — Configuration Help Click the desired hyperlink to get more information about how to use the Router. D-Link DIR-300 User Manual…

• Page 54: Wireless Security

  Section — Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-300 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) •…

• Page 55: Configure Wep

  6. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DIR-300 User Manual…

• Page 56: What Is Wpa

  WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-300 User Manual…

• Page 57: Configure Wpa-Psk And Wpa2-Psk

  6. Click Save Settings to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity until you enable WPA-PSK or WPA-PSK on your adapter and enter the same passphrase as you did on the Router. D-Link DIR-300 User Manual…

• Page 58: Configure Wpa/Wpa2-Psk

  6. Click Save Settings to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity until you enable WPA/WPA2-PSK on your adapter and enter the same passphrase as you did on the Router. D-Link DIR-300 User Manual…

• Page 59: Configure Wpa, Wpa2, And Wpa/Wpa2 (Radius)

  RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. If you have a secondary RADIUS server, enter its IP address, port, and secret key. 9. Click Save Settings to save your settings. D-Link DIR-300 User Manual…

• Page 60: Connect To A Wireless Network

  Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-300 User Manual…

• Page 61: Configure Wep

  XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-300 User Manual…

• Page 62
  It may take 0-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless router. D-Link DIR-300 User Manual…

• Page 63: Configure Wpa-Psk

  XP Wireless Utility by right-clicking ® on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DIR-300 User Manual…

• Page 64
  It may take 0-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DIR-300 User Manual…

• Page 65: Setting Up Wi-Fi Protection

  (WCN 2.0 in Windows Vista) The DIR-300 supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista. The instructions for setting this up depend on whether you are using Windows Vista to configure the Router or third party software.

• Page 66: Setting Up A Configured Router

  Wi-Fi protected network. If you are using third party software, run the appropriate Wi-Fi Protected System utility. You will be asked to either use the push button method or to manually enter the PIN. Follow the on-screen instructions. D-Link DIR-300 User Manual…

• Page 67: Changing The Computer Name And Joining A Workgroup

  Section — Changing the Computer Name and Joining a Workgroup Changing the Computer Name and Joining a Workgroup The following are step-by-step directions to change the computer name and join a workgroup. 1. Click on Properties. 2. Click on the Advanced system settings link. D-Link DIR-300 User Manual…

• Page 68
  When you are finished, click the Change button. 4. Go to the Computer Name/Domain Changes window and click the radio button next to the Workgroup you want to join. When you are finished, click the OK button. D-Link DIR-300 User Manual…

• Page 69: Configuring The Ip Address In Vista

  The following are step-by-step directions to configure the IP address in Windows Vista. 1. Click on Properties. 2. Go to the Network and Internet window and click the appropriate Local Area Connection icon. 3. Right-click the Local Area Connection icon and then select Properties from the drop-down menu. D-Link DIR-300 User Manual…

• Page 70
  Local Area Connections Properties window and enter the desired IP address in the space offered. Then click the “Use the following DNS server adresses” option on the same tab and enter the desired DNS server information. D-Link DIR-300 User Manual…
• Page 71
  7. Go to the Local Area Connection Status window and click the Details button. 8. Confirm your new settings on the Network Connection Status window. When you are finished, click the Done button. D-Link DIR-300 User Manual…

• Page 72: Setting Up A Connection Or Network Wirelessly

  2. Go to the Set up a connection or network window and choose the Set up a wireless router or access point Set up a new wireless network for your home or business option. Click the Next button. D-Link DIR-300 User Manual…

• Page 73
  3. Click the Next button on the Set up a wireless router or access point window. 4. The following window displays the system progress. 5. This window confirms that you want to create wireless network settings that are savable to a USB flash drive. D-Link DIR-300 User Manual…
• Page 74
  Click the Show advanced network security options link. 8. Select security method on the Choose advanced network security options window in the Set up a wireless router or access point wizard. Click the Next button. D-Link DIR-300 User Manual…
• Page 75
  11.Once you have saved your network settings to USB, use the pull-down menu on the Insert the USB flash drive into this computer window in the Set up a wireless router or access point wizard to select a destination for your network settings. Click the Next button. D-Link DIR-300 User Manual…
• Page 76
  13.Once you are finished, the To add a device or computer, follow these instructions window in the Set up a wireless router or access point wizard opens. When you are finished, click the Close button. D-Link DIR-300 User Manual…

• Page 77: Connecting To A Secured Wireless Network (Wep, Wpa-Psk & Wpa2-Psk)

  Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK) The following are step-by-step directions to set up a wireless connection. 1. Click on Properties. 2. Click the Manage network connections link in the Network and Sharing Center window. D-Link DIR-300 User Manual…

• Page 78
  4. Select a network to connect to in the Select a network to connect to window in the Connect to a network wizard and then click the Connect button. 5. The following Connect to a network wizard window displays the system progress. D-Link DIR-300 User Manual…
• Page 79
  Connect to a network wizard is displayed. Choose to save to the network and/or start the new connection automatically. When you are finished, click the Close button. 8. The successful connection is displayed at the bottom of the Windows start up menu. D-Link DIR-300 User Manual…
• Page 80
  Section 10 — Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA- 9. Confirm your new settings by calling up the command prompt and then entering the ipconfig command. 10.To test the new IP address, use the Ping feature of the command prompt. D-Link DIR-300 User Manual…

• Page 81: Connecting To An Unsecured Wireless Network

  Connecting to an Unsecured Wireless Network The following are step-by-step directions to set up an unsecured wireless connection. 1. Click on Properties. 2. Go to the Network and Sharing Center window and click the Manage Network Connections link. D-Link DIR-300 User Manual…

• Page 82
  4. Select a network to connect to in the Select a network to connect to window in the Connect to a network wizard and then click the Connect button. 5. Confirm your desire to connect anyway on the following Network Connection Status window. D-Link DIR-300 User Manual…
• Page 83
  Choose to save to the network and/or start the new connection automatically. When you are finished, click the Close button. 8. The successful connection is displayed at the bottom of the Windows start up menu. D-Link DIR-300 User Manual…
• Page 84
  Section 11 — Connecting to an Unsecured Wireless Network 9. Confirm your new settings by calling up the command prompt and then entering the ipconfig command. 10.To test the new IP address, use the Ping feature of the command prompt. D-Link DIR-300 User Manual…

• Page 85: Troubleshooting

  1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.

• Page 86
  • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.
• Page 87
  NT, 2000, and XP users type in cmd) and press ® ® Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-300 User Manual…
• Page 88
  • To change the MTU enter the number in the MTU field and click the Save Settings button to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-300 User Manual…

• Page 89: Wireless Basics

  D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.

• Page 90: What Is Wireless

  D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work? Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B.

• Page 91
  Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •…

• Page 92: Tips

  The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like airports, hotels, coffee shops, libraries, restaurants, and convention centers.

• Page 93: Wireless Modes

  An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DIR-300 User Manual…

• Page 94: Networking Basics

  Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

• Page 95: Statically Assign An Ip Address

  2000 — From the desktop, right-click My Network Places > Properties. ® Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router.

• Page 96: Technical Specifications

  Wireless Transmit Power • 48Mbps OFDM, 10% PER,-68dBm) 1dBm ± dBm • 36Mbps OFDM, 10% PER,-75dBm) • 24Mbps OFDM, 10% PER,-79dBm) External Antenna Type • 18Mbps OFDM, 10% PER,-82dBm) Single detachable reverse SMA • 12Mbps OFDM, 10% PER,-84dBm) D-Link DIR-300 User Manual…

• Page 97
  * Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DIR-300 User Manual…

• Page 98: Contacting Technical Support

  Contacting Technical Support D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.

• Page 99: Warranty

  Warranty Period or ninety (90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware.

• Page 100
  Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by DLink in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.
• Page 101
  D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link.

• Page 102: Limitation Of Liability

  Warranty provides specific legal rights and you may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners. Copyright Statement: No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States…

• Page 103: Fcc Statement

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. Industry Canada Statement…

• Page 104: Registration

  Appendix F — Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 4/23/2007 D-Link DIR-300 User Manual…

Специалист техподдержки, PHP-программист, разработчик WordPress