Dts monaco mercedes инструкция на русском

How to Import DTS 8 Project on DTS Monaco Software

In this illustration,car-auto-repair.com share you the guide on how to use DTS Monaco software to import DTS 8 projects.

Preparations:

DTS 8 Projects Import:

Run DTS Monaco software,then select “DTS-Project adminstrieren und verwalten”

Choose “Project administration”,then right click to create “New project”

You will have now 4 possibilities for database import

-DTS 8 project (*.prj or *.xprj)

-Daimler database files (*.CBFs)

-Modular optimzed databases(*.SMR-D)

The DTS Projects should be completely available/organized/bought from somebody

Paths and files for DTS8 import

Select “DTS 8 project (*.prj or *.xprj)”

Select the source for the new project

Choose carline name

Click at the newly created project

A bad set of mnc files looks like this

A very good set of mnc files looks like this:

It help to connect to the specific ECUs.

Or it helps open complete working areas like “Kurztest” or “flashbrowser” or “eigene Config”

Источник

How to Install Mercedes Benz DTS Monaco 8.16 Software

This instruction show you the guide on how to install Mercedes Benz DTS Monaco software.

Preparations:

DTS Monaco 8.16 for Benz Installation Guide ( only for paid version )

After finish downloading and extract you will get below files
Double click DTS-Setup to start installation

Then just click default option to continue

Click Finish

Copy files in the repalce folder to DTS Monaco installation folder replace
C:Program Files(x86)SoftingDiagnostic Tool Set 88.16bin

Then run “DTS Monaco” icon on desktop,it will show you the HWID and ask you to activate
Please sent me your HWID to me( [email protected] ),we will sent you a activate file and license file
When you get the xxx.reg file,double click it to register it to your pc,click yes to add it the registry

Run DTS Monaco and select “Administrate and manage DTS projects’

Select “System”–>”Add license”

Load the License_0000000000000.bin file i sent you before

Now your DTS Monaco have activated successfully!

DTS Monaco 8.03.12 Software Install on Win 7:

When installing DTS Monaco to communicates and works with SDconnect4 all user installed SD Connect C4 Toolkit version 2.1.3. And no one tried to force the work SDconnect Toolkit version 2.1.4.2, which is installed together with the installation of Setup_Addon_DAG. And I did it.
Checked only on the system without DAS/Xentry.
DTS Monaco 8.03.12.
Windows 7 x64.
Follow the next steps:
1. Install Monaco
2. Install Setup_Addon_DAG
3. Go to С:ProgramDataI+ME ACTIAToolkit
4. Open and edit ini
Code:
ShowInTray=2
NetworkIcon=2
DeviceIcon=1
ConnectionState=1
1. Save file and reboot Windows
2. Connect SDconnect MUXvia cable
3. Start System Configurator
4. Go to Licensesand you will see your MUX as DCDIPartW with your serial number. After editing in Interfaces 5. type of MUX will change to MVCI_IME_ACTIA_GmbH_SDconnect
6. Go to Interfaces
Code:
eCOM_SMR
Interface name – > SDconnect_SMR
Bus system interface – > D-PDU API
D-PDU API version – > I+ME ACTIA GmbHXS_D_PDU_API_FOR_DTS_8_03_12
Module type – > MVCI_IME_ACTIA_GmbH_SDconnect
Cable – > CABLE_OBDII_SDCONNECT
Physical links: CAN1, CAN4, CAN8
1. Click Saveand close System Configurator
2. Now you can connect to the car or single ECU
I successfully connected to ZGW221 w/o car
DTS Monaco always sends a notification that it is impossible to contact the EIS221 to read the mileage, voltage, etc. (because w/o car)

DTS Monaco 8.14 Installation:

1.Copy bin folder to C: Program Files (x86) Softing Diagnostic Tool Set 8 8.14 and replace the original file.

Источник

Mercedes pdf-инструкция — DTS Monaco. Как работать с программой

• 

• 

Описание Mercedes pdf-инструкция — DTS Monaco. Как работать с программой

Предлагаем pdf-инструкцию к программе Mercedes — DTS Monaco.

Важно! Наш магазин не занимается продажей ПО, а только выполняет услуги по его установке.

Характеристики данного софта:

• Назначение программы – диагностика
• Язык интерфейса – русский, английский
• Работает с ОС – Windows 7, 10
• Процессор – Intel Core i3 и выше

Этапы выполнения заказа

1. Сначала клиент оплачивает заказ.
2. Для проведения установки софта необходимо наличие программы TeamViewer на компьютере заказчика. Если ее нет, следует выполнить ее установку.
3. Если ПО большого объема, мы даем ссылку, где клиент может ее скачать и загрузить на свой ПК (если на этом этапе появятся трудности, наш специалист поможет вам удаленно скачать программу).
4. Затем наш мастер связывается с Вами для обсуждения времени, когда будет проводиться установка программы.
5. В условленное время мастер подключится к вашему устройству и проведет установку заказанной программы.

Рекомендуем также обратить внимание на другие программы для работы с данными марками авто.

Вы можете задать любой интересующий вас вопрос по товару или работе магазина.

Наши квалифицированные специалисты обязательно вам помогут.

Источник

DTS Monaco 8.14, working together with Ecom DoIP, can cover HU5, HU55, HU6, HU7 etc,and have capabilities of quick test, diagnostic Services, variant coding, flash programming, diagnostic trouble code, Data Display /I0 Control, complete Vehicle Coding, ECU exchange, symbolic trace etc.

YOUTUBE Video on how to use DTS Monaco 8.14 with Ecom DoIP?

Version: DTS Monaco 8.14

Open DTS Monaco 8.14.016

All menu options are gray, because the Benz ECOM device is not connected.

Therefore, next is to plug Benz ECOM device to the computer. And enable the network connection.

After the ECOM device is connected, right click on computer, select “Manage”, then “Device Manager”, and find “ASIX AX88772A USB2.0 to fast Ethernet Adapter”.

Again, open DTS Monaco 8.14.016, you can see all menu options are enabled.

Part 1: System settings

Firstly click on “Administrate and manage DTS projects“.

Tick off interface “ECOM” and interfaces CBF “ecom_CBF”.

Click on “Project administration”, then right click on “BR_172Serie” to select “New project”, then “Modular optimized databases (*.SMR-*).

Next – Add , open “Local Disk (C:) ->Program files -> Mercedes-Benz -> Xentry -> Kontexte -> ODXProjeckte -> PKW_COMMON ->dbr -> HU5 HU7 files”.

Project Name “Hu55”, next.

Select CAN1, Ethernet 1, 61 Logicallinks.

Libraries: CBF, SMR, OTX.

Finish settings. Save the settings.

Part 2: Create a new workspace.

Select “HU55” -> “MBCar_MBVan_SMR_DiagnostiCAN_V_02_05” -> “ecom & DoIP”.

HU55 quick test finished.

Flash programming for HU5, HU55, HU6, HU7 etc.

Read out trouble codes for HU5, HU55, HU6, HU7 etc.

The code are followed with detailed definition.

Data Display /I0 Control.

Complete Vehicle Coding 100% OK.

Источник