Gigabyte ga h81m hd3 инструкция

Языки:

• — 10 — 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. • Always turn off the computer and unplug the power cord from the power outlet before installing an expansion card to prevent hardware damage. 1-6 Back Panel Connectors (Note) The DV

• — 12 — 1-7 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. • After installing the device and before turning on the computer, make sure the device cable has been securely attached to the connector on the motherboard. 1 2 7 13 6 9 10 1114 15 16 8 5 4 3 12 1) ATX_12V_2X4 2)

• — 22 — ` Channel A/B Memory Sub Timings This sub-menu provides memory timing settings for each channel of memory. This sub-menu provides memory timing settings for each channel of memory. The respective timing setting screens are congurable only when Memory Timing Mode is set to Manual or Advanced Manual. Note: Your system may become unstable or fail to boot after you make changes on the memory timings. If this occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values. ` Advanced Vo

• — 34 — FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Ho

• — 21 — & CPU EIST Function (Note 1) Enables or disables Enhanced Intel ® Speed Step Technology (EIST). Depending on CPU loading, Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. Auto lets the BIOS automatically congure this setting. (Default: Auto) & ExtremeMemoryProle(X.M.P.) (Note 2) Allows the BIOS to read the SPD data on XMP memory

• — 24 — 2-4 BIOS Features & Boot Option Priorities Species the overall boot order from the available devices. For example, you can set hard drive as the rst priority (Boot Option #1) and DVD ROM drive as the second priority (Boot Option #2). The list only displays the device with the highest priority for a specic type. For example, only hard drive dened as the rst priority on the Hard Drive BBS Prioritie

• — 8 — Internal Connectors  1 x 24-pin ATX main power connector  1 x 8-pin ATX 12V power connector  2 x SATA 6Gb/s connectors  2 x SATA 3Gb/s connectors  1 x CPU fan header  1 x system fan header  1 x front panel header  1 x front panel audio header  1 x S/PDIF In header  1 x S/PDIF Out header  1 x USB 3.0/2.0 header  2 x USB 2.0/1.1 headers  1 x serial port header  1 x parallel port header  1 x Clear CMOS jumper Back Panel Connectors  1 x PS/2 keyboard/mouse

• — 31 — 2-7 Save & Exit & Save & Exit Setup Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Exit Without Saving Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Load Optimized Defaults

• — 29 — & External SATA Enables or disables support for external SATA devices. (Default: Disabled) ` SuperIOConguration This section provides information on the super I/O chip and allows you to congure the serial port and parallel port. & Serial Port A Enables or disables the onboard serial port. (Default: Enabled) & Parallel Port Enables or disables the onboard parallel port. (Default: Enabled) & Device Mode This item is congurable only when Parallel Port is set to Enabled. Selects an operating mode for the o

• — 5 — GA-H81M-HD3 Motherboard Block Diagram For detailed product information/limitation(s), refer to «1-2 Product Specications.» PS/2 KB/Mouse LGA1150 CPU Intel ® H81 PCIe CLK (100 MHz) CPU CLK+/- (100 MHz) 1 PCI Express x16 COM LPT 6 USB 2.0/1.1 2 USB 3.0/2.0 LPC Bus DDR3 1600/1333 MHz PCI Express Bus PCI Express Bus PCIe CLK (100 MHz) PCI Express x1 2 SATA 3Gb/s 2 SATA 6Gb/s D-Sub HDMI DVI-D DisplayPort DMI 2.0 FDI x16 Dual Channel Memo