Gigabyte h410m h v3 инструкция

For more product details, please visit GIGABYTE’s website.

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

— 3 —

Table of Contents

H410M H V3 Motherboard Layout ……………………………………………………………………….. 4

Chapter 1 Hardware Installation ………………………………………………………………………….5

1-1 Installation Precautions ………………………………………………………………………… 5

1-2 ProductSpecications ………………………………………………………………………….. 6

1-3 Installing the CPU ……………………………………………………………………………….. 9

1-4 Installing the Memory …………………………………………………………………………… 9

1-5 Installing an Expansion Card ………………………………………………………………. 10

1-6 Back Panel Connectors ………………………………………………………………………. 10

1-7 Internal Connectors ……………………………………………………………………………. 12

Chapter 2 BIOS Setup ……………………………………………………………………………………..19

2-1 Startup Screen ………………………………………………………………………………….. 19

2-2 The Main Menu …………………………………………………………………………………. 20

2-3 Favorites (F11) ………………………………………………………………………………….. 21

2-4 Tweaker ……………………………………………………………………………………………. 22

2-5 Settings ……………………………………………………………………………………………. 27

2-6 System Info. ……………………………………………………………………………………… 32

2-7 Boot …………………………………………………………………………………………………. 33

2-8 Save & Exit ……………………………………………………………………………………….. 36

Chapter 3 Appendix …………………………………………………………………………………………37

Drivers Installation ……………………………………………………………………………………….. 37

Regulatory Notices ………………………………………………………………………………………. 38

Contact Us …………………………………………………………………………………………………. 39

— 4 —

H410M H V3 Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5H410M H V3 motherboard

5Motherboard driver disc 5Two SATA cables

5User’s Manual 5I/O Shield

KB_MS CPU_FAN

SYS_FAN

LGA1200

ATX

H410M H V3

F_AUDIO

COMA LED_C

AUDIO

BAT

ATX_12V_2X4

Intel® H510

U32

CODEC

CLR_CMOS

M_BIOS

VGA

HDMI

USB_LAN

PCIEX16

80 60 42

PCIEX1_1

iTE®

Super I/O

GbE LAN

Chip

F_USB

F_PANEL

SPI_TPM

F_U32

DDR4_B1

DDR4_A1

M2A_SB

1 3

0 2

SATA3

USB20

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user’s

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

— 5 —

1-2 ProductSpecications

CPU Support for 10th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/

Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/

Intel® Celeron® processors in the LGA1200 package

(Go to GIGABYTE’s website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel® H510 Express Chipset

Memory Intel® Core™ i9/i7 processors:

— Support for DDR4 2933/2666/2400/2133 MHz memory modules

Intel® Core™ i5/i3/Pentium®/Celeron® processors:

— Support for DDR4 2666/2400/2133 MHz memory modules

 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

 Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

SupportforExtremeMemoryProle(XMP)memorymodules

(Go to GIGABYTE’s website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel® HD Graphics support:

— 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz

— 1 x HDMI port, supporting a maximum resolution of 4096×2160@30 Hz

* Support for HDMI 1.4 version and HDCP 2.3.

Maximum shared memory of 512 MB

Audio Realtek® Audio CODEC

HighDenitionAudio

2/4/5.1/7.1-channel

* Tocongure7.1-channelaudio,youneedtoopentheaudiosoftwareandselect

Deviceadvanced settings > Playback Device to change thedefaultsetting rst.

PleasevisitGIGABYTE’swebsitefordetailsonconguringtheaudiosoftware.

LAN Gigabit Ethernet Chip (1 Gbps/100 Mbps)

Expansion Slots 1 x PCI Express x16 slot, running at x16

1 x PCI Express x1 slot

(The PCI Express slots conform to PCI Express 3.0 standard.)

Storage Interface  1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD support)

4 x SATA 6Gb/s connectors

— 6 —

USB Chipset:

— 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through

the internal USB header)

— 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through

the internal USB header)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

4 x SATA 6Gb/s connectors

1 x CPU fan header

1 x system fan header

1 x RGB LED strip header

1 x front panel header

1 x front panel audio header

1 x USB 3.2 Gen 1 header

1 x USB 2.0/1.1 header

 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI

2.0 module only)

1 x serial port header

1 x Clear CMOS jumper

Back Panel

Connectors

1 x PS/2 keyboard port

1 x PS/2 mouse port

1 x D-Sub port

1 x HDMI port

2 x USB 3.2 Gen 1 ports

4 x USB 2.0/1.1 ports

1 x RJ-45 port

3 x audio jacks

I/O Controller iTE® I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 1x256Mbitash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

— 7 —

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functionsofeachapplicationmayalsovarydependingonmotherboardspecications.

— @BIOS

— Ambient LED

— EasyTune

— Fast Boot

— Game Boost

— ON/OFF Charge

— Smart Backup

— System Information Viewer

Support for Q-Flash

Support for Xpress Install

Bundled

Software

Norton® Internet Security (OEM version)

Realtek® 8118 Gaming LAN Bandwidth Control Utility

Operating

System Support for Windows 10 64-bit

Form Factor Micro ATX Form Factor; 22.6cm x 18.5cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

— 8 —

Please visit GIGABYTE’s website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the Support\Utility List

page on GIGABYTE’s website to

download the latest version of apps.

1-3 Installing the CPU

Please visit GIGABYTE’s website for details on hardware installation.

Installing the CPU

Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Do not remove the CPU socket cover before inserting the CPU. It may pop off from the load

plate automatically during the process of re—engaging the lever after you insert the CPU.

Triangle Pin One Marking on the CPU

NotchNotch

LGA1200 CPU

Alignment

Key

Alignment

Key

LGA1200 CPU Socket

Pin One Corner of the CPU Socket

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE’s website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE’s website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

DualChannelMemoryConguration

This motherboard provides two memory sockets and supports Dual Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

— 9 —

1-6 Back Panel Connectors

PS/2 Keyboard and PS/2 Mouse Port

Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920×1200@60 Hz

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

D-Sub connection to this port.

HDMI Port

The HDMI port supports HDCP 2.3 and Dolby TrueHD and DTS HD Master Audio

formats. It also supports up to 192KHz/16bit 7.1-channel LPCM audio output.

You can use this port to connect your HDMI-supported monitor. The maximum supported resolution is

4096×2160@30 Hz, but the actual resolutions supported are dependent on the monitor being used.

After installing the HDMI device, make sure to set the default sound playback device to HDMI.

(The item name may differ depending on your operating system.)

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two memory modules, it is recommended that memory of

the same capacity, brand, speed, and chips be used.

The two DDR4 memory sockets are divided into two channels and each channel has one memory socket as

following:

Channel A: DDR4_A1

Channel B: DDR4_B1

•Whenremovingthecableconnectedtoabackpanelconnector,rstremovethecablefromyour

device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to

prevent an electrical short inside the cable connector.

USB 2.0/1.1 Port

TheUSBportsupportstheUSB2.0/1.1specication.UsethisportforUSBdevices.

USB 3.2 Gen 1 Port

TheUSB3.2Gen1portsupportstheUSB3.2Gen1specicationandiscompatibletotheUSB2.0

specication.UsethisportforUSBdevices.

— 10 —

AudioJackCongurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

Line In/Rear Speaker Out aaa

Line Out/Front Speaker Out aaaa

Mic In/Center/Subwoofer Speaker Out a a

Front Panel Line Out/Side Speaker Out a

PleasevisitGIGABYTE’swebsitefordetailsonconguringtheaudiosoftware.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

•You can change the functionality of an audio jack using the audio software.

•Tocongure 7.1-channel audio,you needto open the audio software and selectDevice

advancedsettings>PlaybackDevicetochangethedefaultsettingrst.

Line In/Rear Speaker Out (Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out/Front Speaker Out (Green)

The line out jack.

Mic In/Center/Subwoofer Speaker Out (Pink)

The Mic in jack.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

— 11 —

1-7 Internal Connectors

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

4 1 3

2

10

14

11

15

85

9

6

1312

1) ATX_12V_2X4

2) ATX

3) CPU_FAN

4) SYS_FAN

5) LED_C

6) SATA3 0/1/2/3

7) M2A_SB

F_PANEL

9) F_AUDIO

10) F_U32

11) F_USB

12) COMA

13) SPI_TPM

14) CLR_CMOS

15) BAT

7

— 12 —

131

24

12

ATX

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used (500W or greater). If a power supply is used that does not provide the

required power, the result can lead to an unstable or unbootable system.

ATX:

Pin No. Denition Pin No. Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON (soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 5VSB (stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V (Only for 2×12-pin

ATX)

23 +5V (Only for 2×12-pin ATX)

12 3.3V (Only for 2×12-pin

ATX)

24 GND (Only for 2×12-pin ATX)

1/2) ATX_12V_2X4/ATX (2×4 12V Power Connector and 2×12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

onthemotherboard.Beforeconnectingthepowerconnector,rstmakesurethepowersupplyisturned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

ATX_12V_2X4:

Pin No. Denition Pin No. Denition

1 GND (Only for 2×4-pin 12V) 5 +12V (Only for 2×4-pin 12V)

2 GND (Only for 2×4-pin 12V) 6 +12V (Only for 2×4-pin 12V)

3 GND 7 +12V

4 GND 8 +12V

ATX_12V_2X4

41

85

3/4) CPU_FAN/SYS_FAN (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is

the ground wire). The speed control function requires the use of a fan with fan speed control design. For

optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

•Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•Thesefanheadersarenotcongurationjumperblocks.Donotplaceajumpercapontheheaders.

CPU_FAN

1

SYS_FAN

Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

1

Connector CPU_FAN SYS_FAN

Maximum Current 2A 2A

Maximum Power 24W 24W

— 13 —

6) SATA3 0/1/2/3 (SATA 6Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA

1.5Gb/s standard. Each SATA connector supports a single SATA device.

Pin No. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

SATA3

1 3

0 2

77

11

5) LED_C (RGB LED Strip Header)

The header can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power

rating of 2A (12V) and maximum length of 2m.

Pin No. Denition

1 12V

2 G

3 R

4 B

Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

Connect your RGB LED strip to the header. The power pin (marked

with a triangle on the plug) of the LED strip must be connected to Pin

1 (12V) of this header. Incorrect connection may lead to the damage

of the LED strip.

For how to turn on/off the lights of the LED strip please visit the «Unique Features» webpage of

GIGABYTE’s website.

1

RGB LED Strip

1

12V

To enable hot-plugging for the SATA ports, refer to Chapter 2, «BIOS Setup,» «Settings\IO Ports\

SATAAndRSTConguration,»formoreinformation.

— 14 —

7) M2A_SB (M.2 Socket 3 Connector)

The M.2 connector supports M.2 SATA SSDs and M.2 PCIe SSDs.

80 60 42

Follow the steps below to correctly install an M.2 SSD in the M.2 connector.

Step 1:

LocatethepropermountingholefortheM.2SSDtobeinstalledandtheninstallthemountingcliprst.

Step 2:

Slide the M.2 SSD into the connector at an angle.

Step 3:

Press the M.2 SSD down and then secure it by pressing the clip pin into the mounting hole.

The front panel design may differ by chassis. A front panel module mainly consists of power switch,

reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis

front panel module to this header, make sure the wire assignments and the pin assignments are

matched correctly.

F_PANEL (Front Panel Header)

Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator

on the chassis to this header according to the pin assignments below. Note the positive and negative pins

before connecting the cables.

System Status LED

S0 On

S3/S4/S5 Off

•PW (Power Switch):

Connects to the power switch on the chassis front panel. You may

congure the way to turn off your system using thepower switch

(refer to Chapter 2, «BIOS Setup,» «Settings\Platform Power,» for more

information).

•SPEAK (Speaker):

Connects to the speaker on the chassis front panel. The system reports

system startup status by issuing a beep code. One single short beep

will be heard if no problem is detected at system startup.

•PLED/PWR_LED (Power LED):

Connects to the power status indicator

on the chassis front panel. The LED is on

when the system is operating. The LED is

off when the system is in S3/S4 sleep state

or powered off (S5).

•HD (Hard Drive Activity LED):

Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive

is reading or writing data.

•RES (Reset Switch):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer

if the computer freezes and fails to perform a normal restart.

•CI (Chassis Intrusion Header):

Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has

been removed. This function requires a chassis with a chassis intrusion switch/sensor.

•NC: No connection.

PLED-

PW-

SPEAK+

SPEAK-

PLED+

PW+

HD-

RES+

HD+

RES-

Hard Drive

Activity LED

Reset

Switch

Power LED

1

2

19

20

CI-

CI+

Power LED

Chassis Intrusion

Header

Power Switch Speaker

NC

NC

PWR_LED-

PWR_LED-

PWR_LED+

— 15 —

1

2

9

10

9) F_AUDIO (Front Panel Audio Header)

 ThefrontpanelaudioheadersupportsHighDenitionaudio(HD).Youmayconnectyourchassisfront

panel audio module to this header. Make sure the wire assignments of the module connector match the

pin assignments of the motherboard header. Incorrect connection between the module connector and the

motherboard header will make the device unable to work or even damage it.

Some chassis provide a front panel audio module that has separated connectors on each wire instead

of a single plug. For information about connecting the front panel audio module that has different wire

assignments, please contact the chassis manufacturer.

Pin No. Denition Pin No. Denition

1 MIC2_L 6 Sense

2 GND 7 FAUDIO_JD

3 MIC2_R 8 No Pin

4 NC 9 LINE2_L

5 LINE2_R 10 Sense

Pin No. Denition Pin No. Denition

1 VBUS 11 D2+

2 SSRX1- 12 D2-

3 SSRX1+ 13 GND

4 GND 14 SSTX2+

5 SSTX1- 15 SSTX2-

6 SSTX1+ 16 GND

7 GND 17 SSRX2+

8 D1- 18 SSRX2-

9 D1+ 19 VBUS

10 NC 20 No Pin

10) F_U32 (USB 3.2 Gen 1 Header)

 TheheaderconformstoUSB3.2Gen1andUSB2.0specicationandcanprovidetwoUSBports.For

purchasing the optional 3.5″ front panel that provides two USB 3.2 Gen 1 ports, please contact the local

dealer.

10

20 1

11

11) F_USB (USB 2.0/1.1 Header)

 TheheaderconformstoUSB2.0/1.1specication.EachUSBheadercanprovidetwoUSBportsviaan

optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 Power (5V) 6 USB DY+

2 Power (5V) 7 GND

3 USB DX- 8 GND

4 USB DY— 9 No Pin

5 USB DX+ 10 NC

•Do not plug the IEEE 1394 bracket (2×5-pin) cable into the USB 2.0/1.1 header.

•Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord

from the power outlet to prevent damage to the USB bracket.

10

9

2

1

— 16 —

10

9

2

1

12) COMA (Serial Port Header)

The COM header can provide one serial port via an optional COM port cable. For purchasing the optional

COM port cable, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 NDCD- 6 NDSR-

2 NSIN 7 NRTS-

3 NSOUT 8 NCTS-

4 NDTR- 9 NRI-

5 GND 10 No Pin

12

11

2

1

13) SPI_TPM (Trusted Platform Module Header)

You may connect an SPI TPM (Trusted Platform Module) to this header.

Pin No. Denition Pin No. Denition

1Data Output 7Chip Select

2Power (3.3V) 8GND

3No Pin 9IRQ

4NC 10 NC

5Data Input 11 NC

6CLK 12 RST

14) CLR_CMOS (Clear CMOS Jumper)

 UsethisjumpertocleartheBIOScongurationandresettheCMOSvaluestofactorydefaults.Toclear

the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.

•Always turn off your computer and unplug the power cord from the power outlet before clearing

the CMOS values.

•After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or

manuallyconguretheBIOSsettings(refertoChapter2,«BIOSSetup,»forBIOScongurations).

Open: Normal

Short: Clear CMOS Values

— 17 —

15) BAT (Battery)

 Thebatteryprovidespowertokeepthevalues(suchasBIOScongurations,date,andtimeinformation)

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1. Turn off your computer and unplug the power cord.

2. Gently remove the battery from the battery holder and wait for one minute. (Or use a

metal object like a screwdriver to touch the positive and negative terminals of the battery

holder, making them short for 5 seconds.)

3. Replace the battery.

4. Plug in the power cord and restart your computer.

•Always turn off your computer and unplug the power cord before replacing the battery.

•Replace the battery with an equivalent one. Damage to your devices may occur if the battery is

replaced with an incorrect model.

•Contact the place of purchase or local dealer if you are not able to replace the battery by yourself

or uncertain about the battery model.

•When installing the battery, note the orientation of the positive side (+) and the negative side (-)

of the battery (the positive side should face up).

•Used batteries must be handled in accordance with local environmental regulations.

— 18 —

BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the

motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,

saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows

theusertomodifybasicsystemcongurationsettingsortoactivatecertainsystemfeatures.

When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to

keepthecongurationvaluesintheCMOS.

To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on.

To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility.

•Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.

•@BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet

and updates the BIOS.

Chapter 2 BIOS Setup

•BecauseBIOSashingispotentiallyrisky,ifyoudonotencounterproblemsusingthecurrent

versionofBIOS,itisrecommendedthatyounotashtheBIOS.ToashtheBIOS,doitwith

caution.InadequateBIOSashingmayresultinsystemmalfunction.

•It is recommended that you not alter the default settings (unless you need to) to prevent system

instability or other unexpected results. Inadequately altering the settings may result in system’s

failure to boot. If this occurs, try to clear the CMOS values and reset the board to default values.

(Refer to the «Load Optimized Defaults» section in this chapter or introductions of the battery/clear

CMOS jumper in Chapter 1 for how to clear the CMOS values.)

2-1 Startup Screen

The following startup Logo screen will appear when the computer boots.

Function Keys

•When the system is not stable as usual, select the Load Optimized Defaults item to set your system to its defaults.

•The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.

There are two different BIOS modes as follows and you can use the <F2> key to switch between the two modes.

Easy Mode allows users to quickly view their current system information or to make adjustments for optimum

performance.InEasyMode,youcanuseyourmousetomovethroughcongurationitems.TheAdvancedMode

provides detailed BIOS settings. You can press the arrow keys on your keyboard to move among the items

and press <Enter> to accept or enter a sub-menu. Or you can use your mouse to select the item you want.

— 19 —

2-2 The Main Menu

Hardware

Information

Option Description Current Settings

Setup Menus

Conguration

Items

System

Time

Quick Access Bar allows you to quickly move to

the General Help, Easy Mode, Smart Fan 5, or

Q-Flash screen.

Advanced Mode Function Keys

<f><g> Move the selection bar to select a setup menu

<h><i>Movetheselectionbartoselectancongurationitemonamenu

<Enter>/Double Click Execute command or enter a menu

<+>/<Page Up> Increase the numeric value or make changes

<—>/<Page Down> Decrease the numeric value or make changes

<F1> Show descriptions of the function keys

<F2> Switch to Easy Mode

<F3> SavethecurrentBIOSsettingstoaprole

<F4> LoadtheBIOSsettingsfromaprolecreatedbefore

<F5> Restore the previous BIOS settings for the current submenus

<F6> Display the Smart Fan 5 screen

<F7> Load the Optimized BIOS default settings for the current submenus

<F8> Access the Q-Flash utility

<F10> Save all the changes and exit the BIOS Setup program

<F11> Switch to the Favorites submenu

<F12> Capture the current screen as an image and save it to your USB drive

<Insert> Add or remove a favorite option

<Ctrl>+<S> Display information on the installed memory

<Esc> Main Menu: Exit the BIOS Setup program

Submenus: Exit current submenu

— 20 —

2-3 Favorites (F11)

Set your frequently used options as your favorites and use the <F11> key to quickly switch to the page where

all of your favorite options are located. To add or remove a favorite option, go to its original page and press

<Insert> on the option. The option is marked with a star sign if set as a «favorite.»

— 21 —

&CPU Clock Ratio

Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU

being installed.

&Ring Ratio

Allows you to set the CPU Uncore ratio. The adjustable range is dependent on the CPU being used. (Default:

Auto)

&IGP Ratio (Note)

Allows you to set the Graphics Ratio. (Default: Auto)

&AVX Offset (Note)

AVX offset is the negative offset of AVX ratio.

Advanced CPU Settings

&CPU Over Temperature Protection (Note)

 Allowsyoutone-tunetheTJMaxoffsetvalue.(Default:Auto)

&FCLK Frequency for Early Power On

Allows you to set the FCLK frequency. Options are: Normal(800Mhz), 1GHz, 400MHz. (Default: 1GHz)

&Hyper-Threading Technology

Allows you to determine whether to enable multi-threading technology when using an Intel® CPU that

supports this function. This feature only works for operating systems that support multi-processor mode.

AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)

&No. of CPU Cores Enabled

Allows you to select the number of CPU cores to enable in an Intel® multi-core CPU (the number of CPU

coresmayvarybyCPU).AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)

&VT-d

Enables or disables Intel® Virtualization Technology for Directed I/O. (Default: Enabled)

(Note) This item is present only when you install a CPU that supports this feature. For more information about

Intel® CPUs’ unique features, please visit Intel’s website.

2-4 Tweaker

Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall

systemcongurations.Incorrectlydoingoverclock/overvoltagemayresultindamagetoCPU,chipset,ormemory

and reduce the useful life of these components. This page is for advanced users only and we recommend you not to

alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings

may result in system’s failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)

— 22 —

&Intel(R) Speed Shift Technology (Intel® Speed Shift Technology) (Note)

Enables or disables Intel® Speed Shift Technology. Enabling this feature allows the processor to ramp up

its operating frequency more quickly and then improves the system responsiveness. (Default: Enabled)

&CPU Thermal Monitor (Note)

Enables or disables Intel® Thermal Monitor function, a CPU overheating protection function. When enabled,

the CPU core frequency and voltage will be reduced when the CPU is overheated. Auto lets the BIOS

automaticallycongurethissetting.(Default:Auto)

&Ring to Core offset (Down Bin)

Allows you to determine whether to disable the CPU Ring ratio auto-down function. Auto lets the BIOS

automaticallycongurethissetting.(Default:Auto)

&CPU EIST Function (Note)

Enables or disables Enhanced Intel® Speed Step Technology (EIST). Depending on CPU loading, Intel®

EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease

average power consumption and heat production. AutoletstheBIOSautomaticallycongurethissetting.

(Default: Auto)

&Race To Halt (RTH) (Note)/EnergyEfcientTurbo (Note)

Enables or disables the CPU power saving related settings.

&Voltage Optimization

Allows you to determine whether to enable voltage optimization to reduce power consumption. (Default:

Auto)

&Intel(R) Turbo Boost Technology (Note)

Allows you to determine whether to enable the Intel® CPU Turbo Boost technology. Auto lets the BIOS

automaticallycongurethissetting.(Default:Auto)

&Intel(R) Turbo Boost Max Technology 3.0 (Note)

Enables or disables Intel® Turbo Boost Max Technology 3.0. Intel® Turbo Boost Max Technology 3.0 allows

the system to identify the processor’s best performance core and lets you manually direct the most critical

workloads to it. You can even adjust the frequency of each core individually for performance optimization.

(Default: Enabled)

&CPU Flex Ratio Override

Enables or disables the CPU Flex Ratio. The maximum CPU clock ratio will be based on the CPU Flex

Ratio Settings value if CPU Clock Ratio is set to Auto. (Default: Disabled)

&CPU Flex Ratio Settings

Allows you to set the CPU Flex Ratio. The adjustable range may vary by CPU.

&Frequency Clipping TVB (Note)

Allows you to enable or disable automatic CPU frequency reduction initiated by Thermal Velocity Boost.

AutoletstheBIOSautomaticallycongurethissetting.(Default:Auto)

&Voltage reduction initiated TVB (Note)

Allows you to enable or disable automatic CPU voltage reduction initiated by Thermal Velocity Boost. Auto

letstheBIOSautomaticallycongurethissetting.(Default:Auto)

dActive Turbo Ratios

&Turbo Ratio (1-Core Active~10-Core Active)

Allows you to set the CPU Turbo ratios for different number of active cores. Auto sets the CPU Turbo

ratiosaccordingtotheCPUspecications.

Thisitemiscongurableonlywhen

Active Turbo Ratios is set

to

Enabled

.

(Default: Auto)

(Note) This item is present only when you install a CPU that supports this feature. For more information about

Intel® CPUs’ unique features, please visit Intel’s website.

— 23 —

dC-States Control

&CPU Enhanced Halt (C1E)

Enables or disables Intel

®

CPU Enhanced Halt (C1E) function, a CPU power-saving function in system halt state.

When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease

power consumption. AutoletstheBIOSautomaticallycongurethissetting.Thisitemiscongurableonly

when C-States Control is set to Enabled. (Default: Auto)

&C3 State Support (Note)

Allows you to determine whether to let the CPU enter C3 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.

The C3 state is a more enhanced power-saving state than C1. AutoletstheBIOSautomaticallycongure

thissetting.ThisitemiscongurableonlywhenC-States Control is set to Enabled. (Default: Auto)

&C6/C7 State Support (Note)

Allows you to determine whether to let the CPU enter C6/C7 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.

The C6/C7 state is a more enhanced power-saving state than C3. AutoletstheBIOSautomaticallycongure

thissetting.ThisitemiscongurableonlywhenC-States Control is set to Enabled. (Default: Auto)

&C8 State Support (Note)

Allows you to determine whether to let the CPU enter C8 mode in system halt state. When enabled, the CPU

core frequency and voltage will be reduced during system halt state to decrease power consumption. The

C8 state is a more enhanced power-saving state than C6/C7. AutoletstheBIOSautomaticallycongure

thissetting.ThisitemiscongurableonlywhenC-States Control is set to Enabled. (Default: Auto)

&C10 State Support (Note)

Allows you to determine whether to let the CPU enter C10 mode in system halt state. When enabled, the

CPU core frequency and voltage will be reduced during system halt state to decrease power consumption.

The C10 state is a more enhanced power-saving state than C8. AutoletstheBIOSautomaticallycongure

thissetting.ThisitemiscongurableonlywhenC-States Control is set to Enabled. (Default: Auto)

&Package C State Limit (Note)

Allows you to specify the C-state limit for the processor. AutoletstheBIOSautomaticallycongurethis

setting.ThisitemiscongurableonlywhenC-States Control is set to Enabled. (Default: Auto)

&CPU Power Performance (Note)

Allows you to determine whether to increase CPU performance. (Default: Auto)

dTurbo Power Limits

Allows you to set a power limit for CPU Turbo mode. When the CPU power consumption exceeds the

speciedpowerlimit,theCPUwillautomaticallyreducethecorefrequencyinordertoreducethepower.

AutosetsthepowerlimitaccordingtotheCPUspecications.(Default:Auto)

&Package Power Limit TDP (Watts) / Package Power Limit Time

 AllowsyoutosetthepowerlimitforCPUTurbomodeandhowlongittakestooperateatthespeciedpower

limit.Ifthespeciedvalueisexceeded,theCPUwillautomaticallyreducethecorefrequencyinorderto

reduce the power. AutosetsthepowerlimitaccordingtotheCPUspecications.Thisitemiscongurable

only when Turbo Power Limits is set to Enabled. (Default: Auto)

&DRAM Power Limit (Watts) / DRAM Power Limit Time

 AllowsyoutosetthepowerlimitformemoryTurbomodeandhowlongittakestooperateatthespecied

power limit. AutoletstheBIOSautomaticallycongurethissetting.Thisitemiscongurableonlywhen

Turbo Power Limits is set to Enabled. (Default: Auto)

(Note) This item is present only when you install a CPU that supports this feature. For more information about

Intel® CPUs’ unique features, please visit Intel’s website.

— 24 —

&Core Current Limit (Amps)

 AllowsyoutosetacurrentlimitforCPUTurbomode.WhentheCPUcurrentexceedsthespeciedcurrent

limit, the CPU will automatically reduce the core frequency in order to reduce the current. Auto sets the

powerlimitaccordingtotheCPUspecications.ThisitemiscongurableonlywhenTurbo Power Limits

is set to Enabled. (Default: Auto)

dTurbo Per Core Limit Control (Note 1)

Allows you to control each CPU core limit separately. (Default: Auto)

&ExtremeMemoryProle(X.M.P.)(Note 2)

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when

enabled.

Disabled Disables this function. (Default)

Prole1  UsesProle1settings.

Prole2(Note 2) UsesProle2settings.

&System Memory Multiplier

Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD

data. (Default: Auto)

&Memory Ref Clock

Allows you to manually adjust the memory reference clock. (Default: Auto)

&Memory Odd Ratio (100/133 or 200/266)

Enabled allows Qclk to run in odd frequency. (Default: Auto)

Advanced Memory Settings

&Memory Multiplier Tweaker

Provides different levels of memory auto-tuning. (Default: Auto)

&Channel Interleaving

Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access

different channels of the memory to increase memory performance and stability. Auto lets the BIOS

automaticallycongurethissetting.(Default:Auto)

&Rank Interleaving

Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different

ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically

congurethissetting.(Default:Auto)

&Memory Boot Mode

Provides memory detection and training methods.

Auto    LetstheBIOSautomaticallycongurethissetting.(Default)

Normal The BIOS automatically performs memory training. Please note that if the system

becomes unstable or unbootable, try to clear the CMOS values and reset the board

to default values. (Refer to the introductions of the battery/clear CMOS jumper in

Chapter 1 for how to clear the CMOS values.)

EnableFastBoot Skipmemorydetectionandtraininginsomespeciccriteriaforfastermemory

boot.

Disable Fast Boot Detect and train memory at every single boot.

(Note 1) This item is present only when you install a CPU that supports this feature. For more information about

Intel® CPUs’ unique features, please visit Intel’s website.

(Note 2) This item is present only when you install a CPU and a memory module that support this feature.

— 25 —

&Realtime Memory Timing

 Allowsyoutone-tunememorytimingsaftertheBIOSstage.(Default:Auto)

&Memory Enhancement Settings

Provides several memory performance enhancement settings: Auto, Relax OC, Enhanced Stability, Normal,

Enhanced Performance, High Frequency, High Density, and DDR-4500+. (Default: Auto)

&Memory Channel Detection Message

Allows you to determine whether to show an alert message when the memory is not installed in the optimal

memory channel. (Default: Enabled)

SPD Info

Displays information on the installed memory.

Memory Channels Timing

d Channels Standard Timing Control, Channels Advanced Timing Control, Channels

Misc Timing Control

These sections provide memory timing settings. Note: Your system may become unstable or fail to boot

after you make changes on the memory timings. If this occurs, please reset the board to default values by

loading optimized defaults or clearing the CMOS values.

& Vcore Voltage Mode/CPU Vcore/Dynamic Vcore (DVID)/BCLK Adaptive Voltage/CPU

Graphics Voltage (VAXG)/DRAM Voltage (CH A/B)

These items allow you to adjust the CPU Vcore and memory voltages.

Advanced Voltage Settings

 ThissubmenuallowsyoutocongureLoad-LineCalibrationlevel,over-voltageprotectionlevel,andover-

current protection level.

— 26 —

2-5 Settings

Platform Power

&Platform Power Management

Enables or disables the Active State Power Management function (ASPM). (Default: Disabled)

&PEG ASPM

 AllowsyoutoconguretheASPMmodeforthedeviceconnectedtothe CPU PEG bus.Thisitemis

congurableonlywhenPlatform Power Management is set to Enabled. (Default: Disabled)

&PCH ASPM

 AllowsyoutoconguretheASPMmodeforthedeviceconnectedtoChipset’sPCIExpressbus.Thisitem

iscongurableonlywhenPlatform Power Management is set to Enabled. (Default: Disabled)

&DMI ASPM

 AllowsyoutoconguretheASPMmodeforbothCPUsideandChipsetsideoftheDMIlink.Thisitemis

congurableonlywhenPlatform Power Management is set to Enabled. (Default: Disabled)

&Power On By Keyboard

Allows the system to be turned on by a PS/2 keyboard wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled Disables this function. (Default)

Password Set a password with 1~5 characters to turn on the system.

Keyboard 98 Press POWER button on the Windows 98 keyboard to turn on the system.

Any Key Press any key to turn on the system.

&Power On Password

Set the password when Power On By Keyboard is set to Password.

Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept.

To turn on the system, enter the password and press <Enter>.

Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter>

again without entering the password to clear the password settings.

&Power On By Mouse

Allows the system to be turned on by a PS/2 mouse wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled Disables this function. (Default)

Move Move the mouse to turn on the system.

Double Click Double click on left button on the mouse to turn on the system.

— 27 —

&ErP

Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)

Note: When this item is set to Enabled, the following functions will become unavailable: Resume by Alarm,

power on by mouse, and power on by keyboard.

&Soft-Off by PWR-BTTN

 ConguresthewaytoturnoffthecomputerinMS-DOSmodeusingthepowerbutton.

Instant-Off Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.

&Resume by Alarm

Determines whether to power on the system at a desired time. (Default: Disabled)

If enabled, set the date and time as following:

Wakeupday:Turnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.

&Power Loading

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing

it to shutdown or fail. If this occurs, please set to Enabled. AutoletstheBIOSautomaticallycongurethis

setting. (Default: Auto)

&RC6(Render Standby)

Allows you to determine whether to let the onboard graphics enter standby mode to decrease power

consumption. (Default: Enabled)

&AC BACK

Determines the state of the system after the return of power from an AC power loss.

Memory The system returns to its last known awake state upon the return of the AC power.

Always On The system is turned on upon the return of the AC power.

Always Off The system stays off upon the return of the AC power. (Default)

IO Ports

&Initial Display Output

 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboard

graphics.

IGFX (Note)  Setstheonboardgraphicsastherstdisplay.

PCIe1Slot SetsthegraphicscardonthePCIEX16slotastherstdisplay.(Default)

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

&Internal Graphics

Enables or disables the onboard graphics function. (Default: Auto)

&DVMT Pre-Allocated

Allows you to set the onboard graphics memory size. (Default: 64M)

&DVMT Total Gfx Mem

Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.

(Default: 256M)

&Aperture Size

Allows you to set the maximum amount of system memory that can be allocated to the graphics card.

Options are: 128MB, 256MB, 512MB, 1024MB, and 2048MB. (Default: 256MB)

(Note) This item is present only when you install a CPU that supports this feature.

— 28 —

&Audio Controller

Enables or disables the onboard audio function. (Default: Enabled)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled.

&Above 4G Decoding

Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system

supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and

their drivers are not able to be launched when entering the operating system (because of the limited 4 GB

memory address space). (Default: Disabled)

&PCH LAN Controller

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled.

&Wake on LAN Enable

Enables or disables the wake on LAN function. (Default: Enabled)

&IOAPIC 24-119 Entries

Enables or disables this function. (Default: Enabled)

SuperIOConguration

&Serial Port

Enables or disables the onboard serial port. (Default: Enabled)

USBConguration

&Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

&XHCI Hand-off

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off

support. (Default: Enabled)

&USB Mass Storage Driver Support

Enables or disables support for USB storage devices. (Default: Enabled)

&Mass Storage Devices

Displays a list of connected USB mass storage devices. This item appears only when a USB storage device

is installed.

NetworkStackConguration

&Network Stack

Disables or enables booting from the network to install a GPT format OS, such as installing the OS from

the Windows Deployment Services server. (Default: Disabled)

&IPv4 PXE Support

 EnablesordisablesIPv4PXESupport.ThisitemiscongurableonlywhenNetwork Stack is enabled.

&IPv4 HTTP Support

 EnablesordisablesHTTPbootsupportforIPv4.ThisitemiscongurableonlywhenNetwork Stack is

enabled.

&IPv6 PXE Support

 EnablesordisablesIPv6PXESupport.ThisitemiscongurableonlywhenNetwork Stack is enabled.

&IPv6 HTTP Support

 EnablesordisablesHTTPbootsupportforIPv6.ThisitemiscongurableonlywhenNetwork Stack is

enabled.

&PXE boot wait time

 Allowsyoutocongurehowlongtowaitbeforeyoucanpress<Esc>toabortthePXEboot.Thisitemis

congurableonlywhenNetwork Stack is enabled. (Default: 0)

— 29 —

&Media detect count

 Allowsyoutosetthenumberoftimestocheckthepresenceofmedia.Thisitemiscongurableonlywhen

Network Stack is enabled. (Default: 1)

NVMeConguration

Displays information on your M.2 NVME PCIe SSD if installed.

SATAAndRSTConguration

&SATA Controller(s)

Enables or disables the integrated SATA controllers. (Default: Enabled)

&SATA Mode Selection

Displays the operating mode of the integrated SATA controllers.

AHCI   CongurestheSATAcontrollerstoAHCImode.AdvancedHostControllerInterface

(AHCI)isaninterfacespecicationthatallowsthestoragedrivertoenableadvanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

&Aggressive LPM Support

Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset

SATA controllers. (Default: Disabled)

&Port 0/1/2/3

Enables or disables each SATA port. (Default: Enabled)

&Hot plug

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

&ConguredaseSATA

Enables or disables support for external SATA devices.

Realtek PCIe GBE Family Controller

 Thissub-menuprovidesinformationonLANcongurationandrelatedcongurationoptions.

Miscellaneous

&LEDs in System Power On State

Allows you to enable or disable motherboard LED lighting when the system is on.

Off Disables the selected lighting mode when the system is on.

On Enables the selected lighting mode when the system is on. (Default)

&Intel Platform Trust Technology (PTT)

Enables or disables Intel® PTT Technology. (Default: Disabled)

&Software Guard Extensions (SGX)

Enables or disables the Intel® Software Guard Extensions technology. This feature allows legal software

to operate in a safe environment and protects the software against attacks from malicious software. The

Software Controlled option allows you to enable or disable this feature with an Intel-provided application.

(Default: Software Controlled)

&Max Link Speed

Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation

modeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOSautomaticallycongurethis

setting. (Default: Auto)

&3DMark01 Enhancement

Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)

Trusted Computing

Enables or disables Trusted Platform Module (TPM).

— 30 —

PC Health Status

&Reset Case Open Status

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill

show «No» at next boot.

&Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header.Ifthesystemchassiscoverisremoved,thiseldwillshow«Yes»,otherwiseitwillshow«No».To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VCCSA/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/CPU VAXG

Displays the current system voltages.

Smart Fan 5

&Monitor

Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)

&Fan Speed Control

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal Allows the fan to run at different speeds according to the temperature. You can adjust

the fan speed with System Information Viewer based on your system requirements.

(Default)

Silent Allows the fan to run at slow speeds.

Manual Allows you to control the fan speed in the curve graph.

Full Speed Allows the fan to run at full speeds.

&Fan Control Use Temperature Input

Allows you to select the reference temperature for fan speed control.

&Temperature Interval

Allows you to select the temperature interval for fan speed change.

&FanControl Mode

Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control

mode. (Default)

Voltage Voltage mode is recommended for a 3-pin fan.

PWM PWM mode is recommended for a 4-pin fan.

&Fan Stop

Enables or disables the fan stop function. You can set the temperature limit using the temperature curve.

The fan stops operation when the temperature is lower than the limit. (Default: Disabled)

&Temperature

Displays the current temperature of the selected target area.

&Fan Speed

Displays current fan speeds.

&Temperature Warning Control

Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit

warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF.

&Fan Fail Warning

Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or

fan connection when this occurs. (Default: Disabled)

— 31 —

2-6 System Info.

This section provides information on your motherboard model and BIOS version. You can also select the default

language used by the BIOS and manually set the system time.

&Access Level

Displays the current access level depending on the type of password protection used. (If no password is

set, the default will display as Administrator.) The Administrator level allows you to make changes to all

BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.

&System Language

Selects the default language used by the BIOS.

&System Date

Sets the system date. The date format is week (read-only), month, date, and year. Use <Enter> to switch

betweentheMonth,Date,andYeareldsandusethe<PageUp>or<PageDown>keytosetthedesired

value.

&System Time

Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:00:00. Use

<Enter>toswitchbetweentheHour,Minute,andSecondeldsandusethe<PageUp>or<PageDown>

key to set the desired value.

Plug in Devices Info

Displays information on your PCI Express and M.2 devices if installed.

Q-Flash

 AllowsyoutoaccesstheQ-FlashutilitytoupdatetheBIOSorbackupthecurrentBIOSconguration.

— 32 —

2-7 Boot

&Bootup NumLock State

Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On)

&Security Option

 Specieswhetherapasswordisrequiredeverytimethesystemboots,oronlywhenyouenterBIOSSetup.

Afterconguringthisitem,setthepassword(s)undertheAdministrator Password/User Password item.

Setup A password is only required for entering the BIOS Setup program.

System A password is required for booting the system and for entering the BIOS Setup program.

(Default)

&Full Screen LOGO Show

Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the

GIGABYTE Logo when the system starts up. (Default: Enabled)

&Boot Option Priorities

 Speciestheoverallbootorderfromtheavailabledevices.RemovablestoragedevicesthatsupportGPT

formatwillbeprexedwith«UEFI:»stringonthebootdevicelist.Tobootfromanoperatingsystemthat

supportsGPTpartitioning,selectthedeviceprexedwith»UEFI:»string.

Or if you want to install an operating system that supports GPT partitioning such as Windows 10 64-bit,

selecttheopticaldrivethatcontainstheWindows1064-bitinstallationdiscandisprexedwith«UEFI:»

string.

&Fast Boot

Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup

speed. (Default: Disable Link)

&SATA Support

Last Boot SATA Devices Only Except for the previous boot drive, all SATA devices are disabled

before the OS boot process completes. (Default)

All SATA Devices All SATA devices are functional in the operating system and during the POST.

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast.

&VGA Support

Allows you to select which type of operating system to boot.

Auto Enables legacy option ROM only.

EFI Driver Enables EFI option ROM. (Default)

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast.

— 33 —

&USB Support

Disable Link All USB devices are disabled before the OS boot process completes.

Full Initial All USB devices are functional in the operating system and during the POST.

(Default)

Partial Initial Part of the USB devices are disabled before the OS boot process completes.

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast. This function is disabled

when Fast Boot is set to Ultra Fast.

&PS2 Devices Support

Disable Link All PS/2 devices are disabled before the OS boot process completes.

Enabled All PS/2 devices are functional in the operating system and during the POST.

(Default)

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast. This function is disabled

when Fast Boot is set to Ultra Fast.

&NetWork Stack Driver Support

Disable Link Disables booting from the network. (Default)

Enabled Enables booting from the network.

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast.

&Next Boot After AC Power Loss

Normal Boot Enables normal bootup upon the return of the AC power. (Default)

Fast Boot Keeps the Fast Boot settings upon the return of the AC power.

 ThisitemiscongurableonlywhenFast Boot is set to Enabled or Ultra Fast.

&Mouse Speed

Allows you to set the mouse cursor movement speed. (Default: 1 X)

&Windows 10 Features

Allows you to select the operating system to be installed. (Default: Windows 10)

&CSM Support

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.

Disabled Disables UEFI CSM and supports UEFI BIOS boot process only. (Default)

Enabled Enables UEFI CSM.

&LAN PXE Boot Option ROM

Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

&Storage Boot Option Control

Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.

Do not launch Disables option ROM.

UEFI Enables UEFI option ROM only.

Legacy Enables legacy option ROM only. (Default)

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

&Other PCI devices

Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other

than the LAN, storage device, and graphics controllers.

Do not launch Disables option ROM.

UEFI Enables UEFI option ROM only. (Default)

Legacy Enables legacy option ROM only.

 ThisitemiscongurableonlywhenCSM Support is set to Enabled.

— 34 —

&Administrator Password

 Allowsyoutocongureanadministratorpassword.Press<Enter>onthisitem,typethepassword,and

thenpress<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress

<Enter>. You must enter the administrator password (or user password) at system startup and when entering

BIOS Setup. Differing from the user password, the administrator password allows you to make changes to

all BIOS settings.

&User Password

 Allowsyoutocongureauserpassword.Press<Enter>onthisitem,typethepassword,andthenpress

<Enter>.Youwillberequestedtoconrmthepassword.Typethepasswordagainandpress<Enter>.

You must enter the administrator password (or user password) at system startup and when entering BIOS

Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.

To cancel the password, press <Enter> on the password item and when requested for the password, enter

thecorrectonerst.Whenpromptedforanewpassword,press<Enter>withoutenteringanypassword.

Press<Enter>againwhenpromptedtoconrm.

 NOTE:BeforesettingtheUserPassword,besuretosettheAdministratorPasswordrst.

Secure Boot

 AllowsyoutoenableordisableSecureBootandcongurerelatedsettings.Thisitemiscongurableonly

when CSM Support is set to Disabled.

&Preferred Operating Mode

Allows you to select whether to enter Easy mode or Advanced mode after entering BIOS Setup. Auto

enters the BIOS mode where it was last time. (Default: Auto)

— 35 —

2-8 Save & Exit

&Save & Exit Setup

Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup

program. Select No or press <Esc> to return to the BIOS Setup Main Menu.

&Exit Without Saving

Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made

in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu.

&Load Optimized Defaults

Press <Enter> on this item and select Yes to load the optimal BIOS default settings. The BIOS defaults

settings help the system to operate in optimum state. Always load the Optimized defaults after updating

the BIOS or after clearing the CMOS values.

&Boot Override

Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes

toconrm.Yoursystemwillrestartautomaticallyandbootfromthatdevice.

&SaveProles

 ThisfunctionallowsyoutosavethecurrentBIOSsettingstoaprole.Youcancreateupto8prolesand

saveasSetupProle1~SetupProle8.Press<Enter>tocomplete.OryoucanselectSelect File in

HDD/FDD/USBtosavetheproletoyourstoragedevice.

&LoadProles

If your system becomes unstable and you have loaded the BIOS default settings, you can use this function

toloadtheBIOSsettingsfromaprolecreatedbefore,withoutthehassles ofreconguringtheBIOS

settings.Firstselecttheproleyouwishtoloadandthenpress<Enter>tocomplete.YoucanselectSelect

File in HDD/FDD/USBtoinputtheprolepreviouslycreatedfromyourstoragedeviceorloadtheprole

automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked

properly (last known good record).

— 36 —

Chapter 3 Appendix

Please visit GIGABYTE’s website for

more software information.

•Beforeinstallingthedrivers,rstinstalltheoperatingsystem.

•After installing the operating system, insert the motherboard driver disc into your optical drive. Click

on the message «Tap to choose what happens with this disc» on the top-right corner of the screen

and select «Run Run.exe.» (Or go to My Computer, double-click the optical drive and execute the

Run.exe program.)

«Xpress Install» will automatically scan your system and then list all of the drivers that are recommended to

install. You can click the Xpress Install button and «Xpress Install» will install all of the selected drivers. Or click

the arrow icon to individually install the drivers you need.

Please visit GIGABYTE’s website for

more troubleshooting information.

Drivers Installation

— 37 —

Regulatory Notices

United States of America, Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications. This class

B digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d’Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-

003 du Canada.

European Union (EU) CE Declaration of Conformity

This device complies with the following directives: Electromagnetic

Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/

EU, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement.

This product has been tested and found to comply with all essential

requirements of the Directives.

European Union (EU) RoHS (recast) Directive 2011/65/EU & the

European Commission Delegated Directive (EU) 2015/863 Statement

GIGABYTE products have not intended to add and safe from hazardous

substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP).

The parts and components have been carefully selected to meet RoHS

requirement. Moreover, we at GIGABYTE are continuing our efforts to

develop products that do not use internationally banned toxic chemicals.

European Union (EU) Community Waste Electrical & Electronic

Equipment (WEEE) Directive Statement

GIGABYTEwillfulllthenationallawsasinterpretedfromthe2012/19/

EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive.

The WEEE Directive species the treatment, collection, recycling and

disposal of electric and electronic devices and their components. Under

the Directive, used equipment must be marked, collected separately, and

disposed of properly.

WEEE Symbol Statement

The symbol shown below is on the product or on its

packaging, which indicates that this product must not be

disposed of with other waste. Instead, the device should be

taken to the waste collection centers for activation of the

treatment, collection, recycling and disposal procedure.

For more information about where you can drop off your waste equipment

forrecycling,pleasecontactyourlocalgovernmentofce,yourhousehold

waste disposal service or where you purchased the product for details of

environmentally safe recycling.

End of Life Directives-Recycling

The symbol shown below is on the product or on its packaging,

which indicates that this product must not be disposed of with

other waste. Instead, the device should be taken to the waste

collection centers for activation of the treatment, collection,

recycling and disposal procedure.

Déclaration de Conformité aux Directives de l’Union européenne (UE)

Cet appareil portant la marque CE est conforme aux directives de l’UE

suivantes: directive Compatibilité Electromagnétique 2014/30/UE, directive

Basse Tension 2014/35/UE et directive RoHS II 2011/65/UE. La conformité

à ces directives est évaluée sur la base des normes européennes

harmonisées applicables.

European Union (EU) CE-Konformitätserklärung

Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien:

EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/30/EU und

RoHS-Richtlinie 2011/65/EU erfüllt. Die Konformität mit diesen Richtlinien

wird unter Verwendung der entsprechenden Standards zurEuropäischen

Normierung beurteilt.

CE declaração de conformidade

Este produto com a marcação CE estão em conformidade com das

seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva CEM

2014/30/EU; Diretiva RSP 2011/65/UE. A conformidade com estas diretivas

évericadautilizandoasnormaseuropeiasharmonizadas.

CE Declaración de conformidad

Este producto que llevan la marca CE cumplen con las siguientes

Directivas de la Unión Europea: Directiva EMC (2014/30/EU), Directiva

de bajo voltaje (2014/35/EU), Directiva RoHS (recast) (2011/65/EU).

El cumplimiento de estas directivas se evalúa mediante las normas

europeas armonizadas.

Dichiarazione di conformità CE

Questo prodotto è conforme alle seguenti direttive: Direttiva sulla

compatibilità elettromagnetica 2014/30/UE, Direttiva sulla bassa tensione

2014/35/UE, Direttiva RoHS (rifusione) 2011/65/UE. Questo prodotto è

stato testato e trovato conforme a tutti i requisiti essenziali delle Direttive.

Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Product Name: Motherboard

Trade Name: GIGABYTE

Model Number: H410M H V3

Responsible Party – U.S. Contact Information: G.B.T. Inc.

Address: 17358 Railroad street, City Of Industry, CA91748

Tel.: 1-626-854-9338

Internet contact information: https://www.gigabyte.com

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired operation.

— 38 —

Contact Us

GIGA-BYTE TECHNOLOGY CO., LTD.

Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan

TEL: +886—2-8912-4000, FAX: +886-2-8912-4005

Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com

WEB address (English): https://www.gigabyte.com

WEB address (Chinese): https://www.gigabyte.com/tw

•GIGABYTE eSupport

To submit a technical or non-technical (Sales/Marketing) question, please link to:

https://esupport.gigabyte.com

— 39 —

1. Manuals
2. Brands
3. GIGA-BYTE TECHNOLOGY Manuals
4. Motherboard
5. H410M H V3
6. User manual

• Contents

• Table of Contents

• Bookmarks

Summary of Contents for GIGA-BYTE TECHNOLOGY H410M H V3

Мы используем файлы cookie.  Подробнее

Мы используем файлы cookie для вашего удобства пользования сайтом и повышения качества рекомендаций.  Подробнее

Инструкция Gigabyte H410M H V3 доступно в русский?

К сожалению, у нас нет руководства для Gigabyte H410M H V3, доступного в русский. Это руководство доступно в английский.