Girls creator инструкция на русском видео

Смотрите также

A manual braiding machine features three counter-rotating reels and a pull system to create a braided bracelets, with building instructions.

Direct purchase of the instructions

Preview of the instructions at the end of the article.

Context

In 2014, I have created a big braiding machine, with 9 reels and motorized functions. It was the first time I created a braiding machine and have liked a lot the principle. That is why I wanted to create a more affordable version with less parts and without motorized functions to propose a simple and reliable braiding machine to create bracelets.

How it works

The machine is composed of three important elements : the counter rotative reels, the spinning spinneret and the main pull system. The counter rotative reel is made with a fixed turntable gear, where a 20t gear rolls and transmits motion to the reels with a 12/20 gearing reduction. It enables to not use chain links which are expensive (see this picture of my old braiding machine), and also to change easily the gearing by replacing the 12t/20t for a 16t/16t depending of the raw material use (thread, wool etc.)

The second element is the spinning spinneret. I have used the same part as on my old braiding machine which is a 6-holes pulley which rolls on two bushes for bracing it. This part is fixed on the whole assembly of the reels and rotates with it. As the other end of the braid is locked, it forces the three reels to match together in one weaved braid. As the reels turn in another direction, they tend to unwind tightly on the braid so that it does not come apart. This is the key feature to understand how the braiding works.

The last element is the pulling system. The motion of the crank is transmitted though gears to a worm screw on each side, which operates a 8t gear on racks. It enables to pull the whole braid when the crank is operated. I have made this choice to avoid the diameter variation of a drum and to have the braid visible to check the correct braiding. Of course the speed of the pulling system has to be chosen depending of the size and the torsional strength of the raw material, that is why it can be replaced. An other key feature is the sliding worm screw. It is used to shift the moment when the pulling system starts relative to the rotation of the reels. It enables to not have unbraided start on the final braid (visible at 0:47 in the video).

Regarding the result, it is pretty good. I have made lot of tests and adjustments to find the most versatile setting depending of the raw material used. The final braid is tight enough to not take apart, but not too much to have a nice looking and homogeneous braid. The fact that the crank is manually operated is also very cool for varying the speed and understanding how it works.

Pictures and Video

Find this article in video here (youtube)

Purchasing the creation

The idea of this creation was to propose a more affordable version of my braiding machine. That is why I have chosen the parts carefully and make building instructions, but also proposed on the Buildamoc website. Therefore, you can either buy the building instructions PDF in the next section, or the whole package including genuine Lego parts + instructions in PDF on the website Buildamoc :

Building Instructions

This model uses 420 parts which includes spare gear parts for changing the gearing depending of the used threads.  The instructions are 76 pages long and is a step-by-step, high resolution PDF, similar to official Lego set instructions.

Want to know if you can build the manual braiding machine ?  The model has been indexed to rebrickable, check it !

You can buy the instructions with the following button for 5€. You can also buy other building instructions and get an automated discount, 15% off for 2 PDF, and 20% off for 3 PDF on the total). The automated discount is available for all the instructions for sale on nico71.fr.

See it on the shop

Changelog :
08/03/21 : change placement of a blue 3L pin on page 40 step 73. No change on bill of material.

Silver Reed

Инструкция к вязальной машине Silver Reed SK-270,SK-280,SK-155 на русском языке

Инструкция по эксплуатации передней игольницы Silver Reed SRP-60N на руссском языке

Инструкция на сменнику цвета Silver Reed YC-6 на русском языке

Инструкция по эксплуатации ажурная каретка Silver Reed LC2 на русском языке

Инструкция к вязальной машине Silver Reed SK-830,SK-840,SK-860,SK-890 на русском языке

Инструкция к вязальной машине Silver Reed SRP60N на русском языке

Инструкция к лекальному устройству Silver Reed KR-7 на русском языке

Brother

Инструкция к вязальной машине Brother KH800 на английском языке

Инструкция по эксплуатации лекальное устройство Brother КН881 на английском языке

Инструкция к вязальной машине Brother KH868 на русском языке

Инструкция к вязальной машине Brother KR-838 на русском языке

Инструкция к нижней фонтуре Brother KR850 на русском языке

Инструкция по эксплуатации робот-каретка Brother KG93 на русском языке

Инструкция по эксплуатации четырехцветник Brother KRC 900 на русском языке

Toyota

Инструкция к вязальной машине Toyota KS858 на английском языке

Инструкция к вязальной машине Toyota KS901 на русском языке

Нева, Ладога

Инструкция к вязальной машине Нева 2 на русском языке

Инструкция к вязальной машине Нева 4 на русском языке

Инструкция к вязальной машине Нева 5 на русском языке

Инструкция к ластичная приставка к Нева 1 на русском языке

Инструкция к ластичная приставка Ладога 4 на русском языке

Северянка

Инструкция к вязальной машине Северянка на русском языке

Иналса

Инструкция к вязальной машине Иналса на русском языке

Набор позволяет самому связать яркий шарф. Этот комплект — идеально подойдет для путешествий или занятий в дождливый день. Помогает развитию мелкой моторики, развивает воображение. Рекомендуется для детей от 6 лет.

Набор содержит:

Пластиковую подставку,

Крючок,
Пряжу.
Инструкция.

Характеристики:
Возраст: 6+.
Материал: хлопок.