Глюкометр бионайм 550 инструкция по применению

GM550 GETTING STARTED GUIDE

Test Strip Port

Insert test strip here

until you hear a

click.

Display Window

Show your test

Main Button (

result, messages

For operating the

and relative

meter, please

information.

check details in

following sections.

Left Button (

)

Right Button (

For operating the

For operating the

meter, please check

meter, please check

details in following

details in following

sections.

sections.

Front View of Meter

Sample Entry

Test strips

View Window

Protective cover

Test Strips

Test strips vial

1

Batteries Installation

1) Turn the meter over. Press and push battery cover to open.

2) Install the battery. Be sure to put battery in correct direction.

3) Slide the battery cover back until it snaps into place.

1

Battery Cover

Slide cover to

change batteries.

)

)

Back View of Meter

Depth adjustable cap

Release button

Lancet carrier

Safe switch

Lancing Device

Lancet

2

( For self-testing )

2

Setting Up Your Meter — Setting the Date, Time and Unit

1) Press and release main button «

2) Press and hold main button «

into setting mode, the meter will turn off first. Please keep pressing it until you go into the setting

mode. The year will flash.

3) Press left button «

4) Press main button «

Product

name

Meter Serial

Number

5) Repeat steps 3 and 4 to change the date, time format, hour, minute, volume, and measurement

unit. After pressing the main button to confirm the measurement unit setting, your set-up has

been finished.

Hub

Plunger

NOTE

—

Suggest not to use this meter close to source of strong electromagnetic radiation, to avoid

interference with proper operation.

—

Suggest to keep meter free of dust, water or any liquid.

3

Preparing the Lancing Device

1) Hold the depth adjustable cap in one hand and hold the hub in the other hand. Bend the cap

towards the down side. When a gap appears between the cap and hub, pull them off in opposite

directions.

2) Pull off the depth adjustable cap.

3) Insert a new disposable lancet firmly into lancet carrier.

3

» to turn on the Meter.

» for 7 seconds until you go into the setting mode. Before you go

» or right button «

» to change the year.

» to confirm the year and move to month setting.

1

2

3