Hvr mrc1k инструкция по применению на русском

Using the Sony HVR-MRC1 Compact Flash memory

recorder

This guide is designed for users and potential users of the HVR-MRC1 with HDV

cameras. A lot of this information will also be useful to HVR-DR60 users, although

that is not covered in detail here. Likewise, some information relating to using the

memory recorder with DVCAM cameras is included, but these are not fully discussed

here. This document is not designed to replace the product manuals, as only the key

features and settings are covered, so it is also likely to be useful to have the user

manuals for the HVR-MRC1 and the relevant camera to hand.

The level of integration between the memory recorder and the camera will largely

depend on when the camera was introduced. Older cameras were designed without

knowledge of the memory recorder. Newer cameras integrate more tightly and will

include more features directly relevant to the memory recorder, such as a dedicated

status display screen.

Connecting the HVR-MRC1 to the camera

The HVR-Z5E, HVR-Z7E and HVR-S270E all feature direct connections for the

memory recorder. The memory recorder can be clipped directly to these cameras with

no need for cables or batteries. The memory recorder will use an internal i.LINK

connection to the camera, so while the memory recorder is connected the main

i.LINK connection cannot be used.

Figure 1. Images of HVR-MRC1 on back of the HVR-Z7E (left) and on the side

of the HVR-S270E (right)

For all other cameras, the memory recorder needs to be connected to the included

i.LINK cradle, and an L-series battery (same as HVR-Z1E battery) or DC power

Issue 1

Page 1

© Sony United Kingdom Ltd

March 2009

Краткое содержание страницы № 1

3-290-149-11(1)
Memory Recording
Unit
Operating Instructions
Owner’s record
The model number and the serial number are located at the name plate on the left of the
unit. Record the serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. HVR- Serial No. ______________________
HVR-MRC1
 2008 Sony Corporation

Краткое содержание страницы № 2

On trademarks • “InfoLITHIUM” is a trademark of Sony Corporation. • i.LINK and are trademarks of Sony Corporation. Table of contents • HDV and the HDV logo are trademarks of Sony Corporation and Victor Company of Japan, Ltd. • Microsoft, Windows, Windows Vista and Windows Media are either registered trademarks or trademarks of Microsoft Overview ……………………………………………….. 3 Corporation in the United States and/or other countries. • Macintosh and Mac OS are register

Краткое содержание страницы № 3

Overview Integrated architecture to the camcorder Supported models • The body is small and light with a weight of about 130 g • This unit can be connected to a camcorder via a special and connects directly to a camcorder without a cable to interface. provide camcorder mobility. Power is supplied from the • Refer to the supplied “Guide to supported models and camcorder so no additional battery is required; weight and their functions” for details on supported models when size have thus been minimi

Краткое содержание страницы № 4

Names of parts Memory Recording Unit / i.LINK Cradle 1 qg 5 6 qf 7 qh 2 8 3 9 q; qj 4 qk qa qs qd Attaching to the i.LINK cradle Attach this unit to the i.LINK cradle by sliding the unit in the direction of the arrow. 1 RELEASE button 9 PLAY/EXEC button Press this button to remove this unit. Press this button to play recorded files. Press this button during playback to pause playback. 2 CAM LINK button When the menu screen is displayed on the LCD screen, Press this button to switch to CAM LINK [

Краткое содержание страницы № 5

LCD screen display VIDEO mode During recording During playback 1234 5qa 96 q; 87 1 Power supply display 8 Status display This icon is not displayed when this unit is connected Displays the status with an icon. directly to the camcorder. x Power is on and playback/recording is stopped Displays the power supply icons when connected to a PC z Recording or camcorder using the i.LINK cradle. N Playback u Pausing playback Battery pack in use M Fast-forward Display the remaining battery capacity. m Rew

Краткое содержание страницы № 6

Using in VIDEO mode Removing the CompactFlash Connecting this unit to a camcorder 1 Open the CompactFlash slot door and push the eject lever 1 to remove the CompactFlash. Refer to the operating instructions of the camcorder. Connecting the shoe connector of the unit enables the 2 Close the CompactFlash slot door. camcorder to supply power and a stream signal. Inserting/removing optional memory media • Although this unit has been tested with CompactFlash, 1 1 Sony does not guarantee its operation

Краткое содержание страницы № 7

Menu organization (VIDEO mode) root CLIP SELECT DELETE CLIP ALL FORMAT REC MODE NORMAL CACHE INTERVAL LOOP i.LINK MODE AUTO HDV DV SETTING TC FORMAT AUTO NDF DF DV FILETYPE AVI RAW DV INTERVAL REC TIME 0.5sec 1sec 1.5sec 2sec INT.TIME 30sec 1min 5min 10min CAMLINK SEL FOLLOW SYNCHRO SLEEP MODE OFF 1min 5min CAMERA NO ALL RESET * Boldface settings are default settings. CLIP SELECT REC MODE You can select the clip number directly. • NORMAL Press the PREVIOUS/REW (previous clip/rewind) or NEXT/ Set

Краткое содержание страницы № 8

CAMERA NO SETTING You can assign a number to the data clip name when recording. TC FORMAT Use this mode to assign non-overlapping numbers to clip Follows the DF/NDF of the time code from the camcorder names recorded simultaneously on more than one camcorder, connected to this unit. or to manage clip data by assigning numbers. • AUTO ……. Follows the time code format of the camcorder. Press the PREVIOUS/REW (previous clip/rewind) or NEXT/ • NDF ……….. Records the time code in NDF format.

Краткое содержание страницы № 9

Recording images from the camcorder to this unit Images recorded by the camcorder can be recorded onto this x Recording video simultaneously on this unit and unit. a camcorder – Connecting to a camcorder with an “external REC control” function (SYNCHRO mode) Recording images When connected to a camcorder that has an external REC (POWER switch at the ON side) control function, this unit can be controlled by the camcorder to record video data simultaneously to the The different methods of recordin

Краткое содержание страницы № 10

x Recording on this unit during camcorder tape Cache recording mode replacement The most recent approximately maximum 14 seconds of When connected to a camcorder that has an external REC video and audio captured by the camcorder are held in a control function, you can record video on this unit only buffer memory and automatically recorded when the while changing the tape of the camcorder. recording button is pressed. 5 minutes before end of tape Camcorder REC Changing the tape REC STANDBY To set

Краткое содержание страницы № 11

Loop recording mode Repeats overwrite-recording using the available space on the CompactFlash. You cannot select this mode if the remaining recording time is less than 5 minutes (CompactFlash icon is flashing). Setting loop recording mode Select [LOOP] from [REC MODE] on the menu screen. LCD screen display in loop recording mode Remains on during recording Notes • The speed will slow according to the volume of data being written because of limitations of the CompactFlash capacity. For that reaso

Краткое содержание страницы № 12

Playback the image recorded on a CompactFlash in this unit To play back video clip recorded on a CompactFlash in this Trick playback unit, you need to connect this unit to a playback device via an i.LINK cable. When the playback image is output to i.LINK, the clip is played at 3x, 6x, and 9x the normal speed. Playback (POWER switch to ON) To play back at the changed speed Keep pressing . or > button during playback to start The playback method is as follows. playback at the changed speed. • Stan

Краткое содержание страницы № 13

You can record the time code of the HVR-Z7/S270 without a Useful functions in combination tape in the HVR-Z7/S270. with HVR-Z7/S270 If you want to record video using the time code of the HVR-Z7/S270, set the time code setting of the Tapeless external REC control HVR-Z7/S270 as follows. Even if there is no tape in the HVR-Z7/S270, you can start or stop recording the image on this unit. Time code value always advances. • TC MAKE …….. PRESET Set the EXT REC CTRL setting of the HVR-Z7/S270 as •

Краткое содержание страницы № 14

Display the operational status of this unit on the HVR-Z7/S270 LCD screen CAMERA mode – Indicators – Status check indicator • The following information can be displayed on the LCD • The following information can be displayed on the status screen of the HVR-Z7/S270. check indicator (CAMERA mode) of the HVR-Z7/S270. 1 2 1 CompactFlash connecting status REC FORMAT This icon blinks when the remaining recording time of the Displays the recording format of this unit. CompactFlash is low or an error ha

Краткое содержание страницы № 15

VCR mode – Indicators – Status check indicator • The following information can be displayed on the LCD • The following information can be displayed on the status screen of the HVR-Z7/S270. check indicator (VCR mode) of the HVR-Z7/S270. 2 1 3 4 1 CompactFlash connecting status PB FORMAT This icon blinks when the remaining recording time of the Displays the playback format of this unit. CompactFlash is low or an error has occurred in this unit. STATUS 2 CompactFlash mode Displays the status (recor

Краткое содержание страницы № 16

Using in COMPUTER mode Connecting to a computer You can transfer recorded images on this unit as a file in HDV or DV format to a nonlinear editing system or computer. 1 Attach the HVRA-CR1 i.LINK cradle and optional AC adaptor to this unit. For extended use, the AC adaptor is recommended. This unit can still be operated with the battery pack attached. 2 Connect this unit to the computer via the optional i.LINK cable. 3 Slide the POWER switch of this unit to ON. Note This unit cannot receive powe

Краткое содержание страницы № 17

Menu organization (COMPUTER mode) root HDV DV-NTSC DV-PAL DRIVE SETTING TC FORMAT AUTO NDF DF DV FILETYPE AVI RAW DV CAMERA NO *Boldface settings are default settings. Notes HDV • For the following cases, operate “Safety remove Device (for Operate in the VIDEO mode. Set this mode when reading or Windows)” or “Remove by putting the media icon into the writing HDV stream data on a CompactFlash in this unit trash (for Mac OS)” etc., and check that the access lamp using editing software. turns off.

Краткое содержание страницы № 18

Folder saving format Folder organization The file/folder organization of this unit is as follows. Media ROOT VIDEO HVR XX_CCCC_YYYY-MM-DD_hhmmss.M2T XX_CCCC_YYYY-MM-DD_hhmmss.IDX XX_CCCC_YYYY-MM-DD_hhmmss.M2T XX_CCCC_YYYY-MM-DD_hhmmss.IDX XX_CCCC_YYYY-MM-DD_hhmmss.AVI XX_CCCC_YYYY-MM-DD_hhmmss.IDX XX_CCCC_YYYY-MM-DD_hhmmss.AVI XX_CCCC_YYYY-MM-DD_hhmmss.IDX An actual file name has numbers as the following information. XX_CCCC_YYYY-MM-DD_hhmmss.DV • XX : Camera No. (00 to 99) XX_CCCC_YYYY-MM-DD_hh

Краткое содержание страницы № 19

Notes regarding COMPUTER mode • Do not save other data files in the HVR folder. • Do not transfer data from a computer to this unit in COMPUTER mode. Write back data from a computer to this unit by streaming. Write back data after selecting HDV or DV-NTSC, DV-PAL format in PC MODE in the menu. • Do not change folder or file names on your computer. Delete data or format a CompactFlash on this unit to increase the capacity of the CompactFlash. • When removing the CompactFlash media by OS operation

Краткое содержание страницы № 20

Power supply Remaining battery time indication in the AC Preparing the power supply adaptor/charger display window This indication is provided by data communications between The following will explain the optional AC-VQ1050 AC the AC adaptor/charger and the “InfoLITHIUM” battery adaptor/charger. pack. This unit does not have a data communications function, so To charge the battery pack the displayed time may differ from the actual remaining time. This is not a malfunction. When using an “InfoLIT

Если у вас отсутствует техническая возможность для скачивания Инструкция по эксплуатации для Sony HVR-MRC1
вы можете прочесть документ прямо на нашем сайте или
Скачать Sony HVR-MRC1 Инструкция по эксплуатации

• 1
• 2
• 3
• 4
• 5
• 6
• 7
• 8
• 9
• 10
• 11
• 12
• 13
• 14
• 15
• 16
• 17
• 18
• 19
• 20
• 21
• 22
• 23
• 24
• 25
• 26
• 27
• 28
• 29
• 30
• 31
• 32

Инструкции для прочих Sony Аксессуары для видеокамер

Инструкции для прочих Sony

Streamlining Your Workflow with unique Hybrid Re-
cording Solutions from Sony

Speed, reliability, operability, and versatility are key

concerns in any video production.

The HVR-MRC1K Memory Recording Unit from Sony

offers stunning innovations for all aspects of the pro-

duction process — from acquisition to editing, and on

to material archiving.

The HVR-MRC1K consists of the HVR-MRC1 main unit,

HVRA-CR1 cradle, cold-shoe adaptor and an i.LINK

cable. Extremely compact and lightweight, the HVR-

MRC1K can be mounted on a HDV™/DVCAM™ cam-

corder, thereby?converting it to a ’hybrid’ recording

system with CompactFlash® solid-state memory and

tape. It allows the user to record video on a tape and

CompactFlash (CF) card simultaneously.

The widely available CF card can be used to offer se-

cure recording, removable media convenience, high

durability against external vibration, and high-speed

file transfer to a computer. It is possible to record for

about 72 minutes on a 16-GB CF card

This product comes with the full PrimeSupport pack-

age. That’s fast, hassle-free repairs, a helpline offer-

ing expert technical advice, and a free loan unit while

yours is repaired. Plus the peace of mind that Sony is

looking after your equipment – and your business.

Features

HDV in IT Workflow by CompactFlash Memory Re-
cording Unit

The HVR-MRC1K Memory Recording captures the

HDV1080i, DVCAM or DV stream output from the

camcorder and records it as a movie file while you are

simultaneously recording to tape.

You can use a CompactFlash (CF) card*, which offers

secure recording, high-speed access, large data capa-

city, removable media convenience and high durabil-

ity against external vibration.

*Not supplied

HDV/DVCAM/DV File Recording on CompactFlash
Card

The recording time on a 16GB CF card* in HDV,

DVCAM and DV format is approximately 72 minutes.

*At least 133x speed and 2GB capacity is required.

The NCFD8GP and NCFD16GP CF cards from Sony are

recommended. The recording time may change ac-

cording to the CF card type and recording format.

Hybrid Operation Realises Archiving, IT Workflow
and HD/SD Parallel Recording

The Memory Recording Unit provides a hybrid opera-

tion, where images are recorded to tape and a CF

card simultaneously, in a similar fashion to the HVR-

DR60 Hard Disk Recording Unit*.

This means you can immediately access a movie file

for streamlined NLE work, while keeping the master

sourcetape in a safe place.

The file format is M2T for HDV mode and AVI or

RawDV for DVCAM/DV modes. In the same fashion as

HVR-DR60 operation, these files can be edited using

popular NLE software.

In addition, when the built-in down-converter of the

connected HDV camcorder is active, SD images can

be recorded on a CF card while HD images are recor-

ded to tape.

HD master tape is recorded and SD movie files are

created at the same time. HDV or DVCAM tape-based

users can gradually move to IT workflow with this

hybrid-operation. Tapeless recording is also available

if desired.

*HVR-DR60 does not accept a native progressive HDV

stream.

**The Memory Recording Unit adopts the FAT32 file

system. Continuous recording is divided into 4 GB

files (approximately 20 minutes of recording time). A

utility software, available from www.sonybiz.net/hdv,

can merge these divided files for seamless editing on

NLEs. Some NLEs include this function. For details of

NLE operation, please consult your nearest NLE soft-

ware dealer.

HDV Compact Flash memory recording unit

HVR-MRC1K

www.pro.sony.eu/hdv

1