Ice maker im 007s инструкция

Основные характеристики

Описание

Льдогенератор I-Ice IM 007 S предназначен для производства кубикового льда высокой плотности и кристальной чистоты, который широко используется для длительного охлаждения напитков на предприятиях общественного питания. Прибор способен изготавливать лед трех различных размеров. Встроенный бункер позволяет накапливать и хранить произведенный лед.

Агрегат оснащен датчиком наполненности резервуара для льда, служащим для автоматического прекращения работы при полной заполненности бункера, и датчиком наполненности резервуара для воды, позволяющим автоматически контролировать работу прибора. Помимо этого устройство оборудовано системой «антишок», защищающей от удара электротоком во время эксплуатации. Корпус выполнен из металла и высококачественного пластика серебристого цвета, обладающего высокой термоизоляцей.

Льдогенератор был одобрен Ростест-Москва.

Дополнительные характеристики:

• Количество кубиков льда за один цикл: 36
• Время одного цикла: 15 мин.
• Время хранения льда: от 2 до 6 ч
• Объем резервуара для воды: 4 л
• Температура окружающей среды: 25-35 °С
• Габариты в упаковке: 420х390х475 мм

Я согласен с условиями обработки персональных данных

Описание товара:

Характеристики:

Отзывы о товаре:

Пока отзывов об этом товаре нет, но они обязательно появятся!

Добавить отзыв:

Similar Ice Maker Devices: F0522, KML-350MAF, 25IM-BB-F

Instruction Manual
ICE MAKER
Model: IM-100
It is important that you read these instructions before using your portable ice maker and we strongly
recommend that you keep them in a safe place for future reference.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS …………………………………………………….1
PREPARING YOUR ICE MAKER FOR USE
IMPORTANT SAFETY TIPS …………………………………………………………………..2
GETTING TO KNOW YOUR UNIT ……………………………………………………………3
OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER …………………………………………………………….4
CONNECTING YOUR ICE MAKER …………………………………………………………..4
CLEANING AND MAINTAINING YOUR ICE MAKER ………………………………………4
USING YOUR ICE MAKER …………………………………………………………………….5
TROUBLESHOOTING ………………………………………………………………………….5
TECHNICAL PARAMETERS & DEFECTIVE NOTICE ……………………………………6
GUARANTEE ……………………………………………………………………………………7
1
IMPORTANT SAFETY INSTRUCTIONS
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual in regards to your appliance.
Always read and obey all safety massages.
This is the safety alert symbol:
!
All safety messages will follow the safety alert symbol and the word “DANGER” or “WARNING”.
! DANGER
! WARNING
These warnings mean:
You could be seriously injured if you don’t follow immediate instructions.
All safety messages will describe the potential hazard, inform you on how to reduce the chance of injury,
and indicate what can happen if instructions are not followed.
2
PREPARING YOUR ICE MAKER FOR USE
IMPORTANT SAFETY TIPS
When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire,
electric shock, and injury to persons or property. Read all instructions before using any appliance.
Do not operate this or any other appliance with a damaged cord.
Connect to properly polarized outlets only. No other appliance should be plugged into the same
outlet. Be sure that the plug is fully inserted into the receptacle.
Do not run cord over carpeting or other heat insulators. Do not cover the cord. Keep cord away from
traffic areas, and do not submerge in water.
We do not recommend the use of an extension cord, as it may overheat and become a risk of fire. If
you must use an extension cord, use No.14 AWG minimum size and rated no less than 1875 watts.
Unplug the ice maker before cleaning or making repairs.
Exercise caution and use reasonable supervision when appliance is used near children.
Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.
Do not tip over.
If the ice maker is brought indoors from outdoors during the wintertime, give it a few hours to warm
up to room temperature before plugging it in.
3
GETTING TO KNOW YOUR UNIT
1. Cover:
With a transparent window to allow interior visibility.
2. Control Panel:
Easy to use, visible functions and 1-touch display setting.
A) Starts or stops ice making cycle.
B) Selects ice cube size.
3. Water drain cap:
For draining water from water reservoir.
4. Ice basket.
5. Ice scoop.
6. Ice shovel.
1
4
6
2
5
A
B
3
4
OPERATING PROCEDURES & MAINTENANCE
UNPACKING YOUR ICE MAKER
1. Remove all exterior and interior packaging. Check that ice basket and ice scoop is included. If any
part or accessory is missing, please contact our customer service.
2. Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and wash it in warm
water.
3. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e.:
stove, furnace, radiator). Place the ice maker on a level surface. Maker sure that there is at least 5
inches of space between the back and sides of your ice maker and the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging in the unit.
5. The appliance must be positioned so that the plug is accessible.
CONNECTING YOUR ICE MAKER
! DANGER
* Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged please call our customer service.
1. This unit should be properly grounded for your safety. The power cord of this appliance is equipped
with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility
of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not under any
circumstances, cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician.
3. This appliance requires a standard 120 volt, 60Hz electrical outlet with three-prong ground.
Before using your ice maker, it is strongly recommended to clean it thoroughly.
CLEANING AND MAINTAINING YOUR ICE MAKER
Remove the ice basket.
1. Turn the drain cap clockwise to drain out the water.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm
water.
4. Dry the interior and exterior with a soft cloth.
5. Close the drain cap.
6. When the machine is not in use, open water drain cap to drain water completely from water reservoir.
5
USING YOUR ICE MAKER
1. Clean your ice maker first.
2. Open the cover, remove the ice basket and pour water into tank.
Keep water level below the level mark.
3. Plug in the unit and the power indicator light will blink.
4. Press “Power” on the control panel to begin the ice making cycle. The power indicator light will lit.
5. Select the size of the ice cube by pressing the “Select” button. If ambient temperature is below 60°F,
it is recommended to select small or medium size to avoid ice sticking together.
6. The ice making cycle lasts 6 to 12 minutes, depending on the size of the ice cube selection.
7. While the icemaker is on, check water level periodically. If water pump can’t inject water, the ice
maker will stop automatically, and the “Water” indicator will be on.
Press “Power” button, fill water up to the level mark and press “Power” again.
Allow 3 minutes for the refrigerant to settle before restarting.
8. The ice maker automatically stops working when the ice basket is full.
9. Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level.
If unit is not in use, drain all water in the tank reservoir.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
“Water” indicator is on.
Water is low.
“Ice” indicator is on.
Ice basket is full.
“Water” and “Ice” indicator
are both flash.
SOLUTION
Stop the ice maker, fill water, and
restart.
Remove ice from ice basket.
Check if ice is blocking the ice
Ice shovel is stuck.
shovel, otherwise, consults a
certified technician.
Stop the ice maker, and restart
Ice making cycle is too long.
when the ice blocks melt. Select the
small ice size.
Ice cubes stick together.
Water temperature in inner
Change the water in the reservoir.
tank is too low.
Use water between 45°F-90°F.
Ambient temperature or
Please operate the ice maker below
water temperature in inner
ambient temperature of 90°F and
Ice making cycle is normal
tank is too high.
use cold water.
but no ice is made.
Refrigerant liquid leakage.
Consult a qualified technician.
Pipe in the cooling system is
blocked.
6
Consult a qualified technician.
TECHNICAL PARAMETERS
SPECIFICATION
Model
IM-100
Protection Type
I
Power
120V / 60Hz
Rated Current
1.25A
Power Consumption
200W
Refrigerant
R134a/120g
Net Weight
46lbs
Size
17” H x 15” W x 17 1/8” L
Defective Notice
If this product is defective or not working properly
Please DO NOT return to your retail store
Please contact us directly with any Service or Technical Assistance
Contact us toll free at:
1-800-330-0388
7
ICE MAKER
Your Guarantee
If this product is found to be faulty as a result of faulty materials or workmanship
within one year from date of purchase, it will be repaired or replaced free of charge.
This guarantee is subject to the following terms:
SPTUSA, must be notified of the fault.
Proof of purchase must be presented to SPTUSA’s nominated representative.
The warranty will be void if the product is modified, misused or repaired by an
unauthorized person.
The guarantee after repair or replacement will not be extended beyond the original
one-year period.
All replacement parts or units will be new or reconditioned.
Parts or units, which are replaced, become the property of SPTUSA.
The warranty applies to the use of this product in the United States.
Warranty does not include freight charges.
Note : For service, please call Sunpentown Int’l Inc. at
800-330-0388 or visit www.spt-usa.com
This GUARANTEE is in addition to your Statutory Rights.
Dear customer, please keep this warranty for your record – DO NOT return to Sunpentown Int’l Inc.

Was this manual useful for you?

Yes

No

Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project