|
Индикатор уровня заряда аккумуляторов 8-100B SUPNOVA с сигнализацией и термодатчиком, белый
Максимум вход. напряжения, В: 100
Артикул: SN-AT White
Наличие:
В корзину |
3 месяца гарантии |
Подбор Доставка Оплата Скидки Сервис-центр |
Описание
Индикатор уровня заряда аккумуляторов SUPNOVA SN-AT предназначен для литиевых, свинцово-кислотных, LiFePo4 аккумуляторов с напряжением 8-100В.
Технические характеристики |
|
Цвет дисплея | синий или белый |
Диапазон измеряемого напряжения | 8-100В DC |
Рабочий ток | <15 мА |
Точность измерения | 1%±1 ед. |
Скорость измерения | 2 раза в секунду |
Размеры | 65*35*15 мм |
Установочный размер | 58*28 мм |
Индикация:
В моделях с датчиком температуры короткое нажатие SET переключает индикацию между температурой и напряжением АКБ.
Настройка:
- Долго удерживайте кнопку SET чтобы зайти в меню настройки.
- Далее короткие нажатия SET для выбора пункта меню.
- Короткие нажатия кнопки Вкл/Выкл для перемещения по подпунктам.
- Далее короткие нажатия кнопки SET в подпунктах для настройки характеристики.
- Долгое SET после настройки — выход из меню.
Меню 1: Выберите тип батареи кнопкой:
- L-литиевая,
- P-свинцово-кислотная,
- F — LiFePO4.
Затем выберите количество ячеек для литиевых и «железных» батарей, и напряжение для свинцово-кислотных:
- L — от 2 до 25 ячеек
- P — 12, 24, 36, 48, 60,72,80 В
- F от 3 до 26 ячеек.
Меню 2: время выключения подсветки. 10, 30, 60 или 120 секунд. При этом выключаться она будет если функция выключения включена (выбираем ON)
Меню 3: Установка низкого и высокого напряжения.
Меню 4: Включение/выключение сигнализации по низкому напряжению. Только при наличии данной функции. Включить ON. И выставить Напряжение при котором будет звучать предупреждающий сигнал.
Меню 5: Калибровка. Например выбран аккумулятор с номиналом 12 Вольт. Необходимо подключить эталонное напряжение 12 Вольт, например стабилизированный блок питания. Для использования нужно зайти в это меню и нажать откалибровать. Используйте это меню при необходимости, когда есть эталонный источник напряжения
Меню 6: Выбор показывать температуру или нет. Только при наличии данной функции.
Вопросы и отзывы (6)
Ответы на многие вопросы по покупке и доставке товара Вы можете найти на страницах Как купить и Доставка.
Александр Харлов |
Здравствуйте. Для Аккумуляторной батареи LEOCH серии DJM 12В 100,0 А*ч этот индикатор подойдет или посоветуете что то другое? |
Имя |
Ельняков Роман |
||
Здравствуйте, да подойдет. |
||
Имя |
Рашит |
Добрый день! Прошу ответить на несколько вопросов: 1) Можно ли удлинить провода до аккумулятора в моторном отсеке?; 2) Не выйдет ли из строя при запуске мотора?; 3) Можно ли демонтировать датчик температуры и перенести в моторный отсек к аккумулятору?; 4) Будет ли индикация при зарядке на автомобиле или от зарядного устройства?. Спасибо. |
Имя |
Рашит |
Товар в настоящее время проверен только на работоспособность на аккумуляторе 12 вольт от системы сигнализации. Понравилось, что цветное изображение. |
Имя |
Ельняков Роман |
||
Добрый день: |
||
Имя |
Гость |
Здравствуйте! Почему индикатор не работает от клемм аккумулятора. Аккумулятор рабочий,на автомобиле. Подключаю к блоку питания 12 вольт,дисплей загорается |
Имя |
Ельняков Роман |
||
Если подключаете правильно и дисплей не загорается, то он не исправен. |
||
Имя |
Максимум вход. напряжения, В: 100
Тип напряжения: постоянное
Тип индикации: цифровая
Исполнение: Встраиваемое
Тип: Индикатор АКБ
Рабочий ток | <15 мА |
Точность измерения | 1%±1 ед. |
Скорость измерения | 2 раза в секунду |
Размеры | 65*35*15 мм |
Установочный размер | 58*28 мм |
Настройка:
В моделях с датчиком температуры короткое нажатие SET переключает между температурой и вольтметром.
Долго удерживайте SET чтобы зайти в меню настройки. Далее короткие нажатия SET для выбора пункта меню. Короткие нажатия М для перемещения по подпунктам. SET в подпунктах для настройки характеристики. Долгое SET после настройки — выход из меню.
Меню 1: Выберите тип батареи кнопкой. L-литиевая, P-свинцово-кислотная, F — LiFePO4.
Затем выберите количество ячеек для литиевых и «железных» батарей, и напряжение для свинцово-кислотных.
L — от 2 до 25 ячеек
P — 12, 24, 36, 48, 60,72,80 В
F от 3 до 26 ячеек.
Меню 2: время выключения подсветки. 10, 30, 60 или 120 секунд. При этом выключаться она будет если функция выключения включена (выбираем ON)
Меню 3: Установка низкого и высокого напряжения.
Меню 4: Включение/выключение сигнализации по низкому напряжению. Только при наличии данной функции. Включить ON. И выставить Напряжение при котором сигналить.
Меню 5: Калибровка. Например выбран аккумулятор 12В. Необходимо найти проверенное напряжение ровно 12В. Зайти в это меню и нажать откалибровать. Осторожнее с меню, чтобы потом не бегать и не искать лабораторный блок питания или конвертер.
Меню 6: Выбор показывать температуру или нет. Только при наличии данной функции.
Independently Tested
Concealite’s SuperNOVA fixtures are made of durable, impact-resistant steel housings with the highest light output on the market…
up to 200 Watts! These interior fixtures are ideal where emergency lighting codes require expansive illumination such as large
complexes, areas of assembly, or applications with high ceilings.
Powerful.
Practical.
Preferred.
TM
Architectural Features
Aesthetics
SuperNOVA I & II
Neutral cream color paint
standard finish, or fixtures can be field or
custom factory painted (no minimum order for
custom paint).
Up to 30 foot mounting heights on walls,
columns and ceilings.
12 Volt units with 100 and 200 Watt capacities.
Heavy gauge steel cabinet.
Fully adjustable aluminum halogen lamp
heads with locking swivels.
Maintenance free Lead—Calcium battery
standard.
Automatic temperature compensation,
variable rate float charger standard.
Automatic brownout protection.
Low Voltage Disconnect (LVD) protects
battery from deep discharge.
Universal 120/277 VAC input.
90 minutes of emergency illumination.
Operating temperature 32 degrees F
to 104 degrees F (0 degrees C to 40 degrees C) .
Momentary test switch and AC ready pilot light.
Self-diagnostics available.
Meets NFPA 101.
Listed to UL 924.
Custom Finishes:
The SuperNOVA is an attractive interior
emergency lighting fixture for use in any large
indoor areas such as supermarkets, dining
halls, auditoriums, gymnasiums, cafeterias,
community rooms, residential complexes and
apartments, etc. The SuperNOVA provides
powerful illumination that surpasses anything
currently on the market.
Warehouse Distribution Center
The emergency lighting system must be arranged to provide illumination automatically in the event of any interruption of normal lighting.
Emergency lighting…shall be arranged to provide…illumination that is not less than an average of 1 ft-candle and, at any point, not less
than 0.1 ft-candle, measured along the path of egress at floor level.
CODE MANDATED INTERIOR EMERGENCY LIGHTING:
Sections 7.9.2.3 & 7.9.2.1 Emergency Lighting
® ®
Life Safety Code – NFPA 101
H Series
Standard Color: Neutral cream powder coat.
Custom colors, finishes, and textures
to match interiors (Contact Factory).
TP Tamper Proof Screws
H277 Battery Heater (277v)
Installation
The emergency lighting unit shall be
Concealite H Series SuperNOVA and will
conform to UL924 and be installed in
conformance of the National Electrical Code.
The unit shall consist of a heavy duty aluminum
cabinet. The unit shall be equipped with two
aluminum fully adjustable, sealed heads. The
electronics shall include a fully automatic
temperature compensating variable rate
charger, low voltage disconnect, and brown
out circuits. The unit shall have a “Push to Test”
switch and a “AC-ON” pilot light. Upon the loss
of utility power the lamps will illuminate and
operate for a minimum of ninety minutes or until
utility power is restored; at which time the units’
charger will bring the battery back to full
charge within UL requirements.
Product Specifications
Limited Warranty
All Concealite equipment is guaranteed against
defects in materials and workmanship by the
manufacturer for a period of three years from date of
shipment under normal operations and proper use.
Correction of all defects shall be by replacement or
repair (at our discretion) and shall constitute
fulfillment of all manufacturer’s obligations.
SuperNOVA
© 2010 Concealite Life Safety Products
Mounting: Units are designed for mounting to
any flat surface on a wall, column or ceiling by
means of fastening through the back of the
unit housing. Units may also be mounted by
means of accessory mounting shelf.
Wiring: Knockouts are provided to decrease
installation time. Surface wiring is also
provided for by conduit knockouts in the top
and sides of the unit housing.
v.041917–HSN
SuperNOVA I & II
H Series
The adjustable heads are UL listed. Specially
designed high-output halogen lamps are
available in 20, 35, 50, 75, and 100 watts.
Concealite provides free point-by-point layout
service for code compliance. Contact your
local Concealite representative for details.
Illumination
Unit Dimensions
FIXTURE TYPE:
LAMP TYPE:
PROJECT NAME/REF:
PROJECT LOCATION:
FIXTURE
SCHEDULE
APPROVAL:
SuperNova I
Depth 4.0″ (10.16 ) x
Width 13.5″ (34.29 cm) x
Height 8.7″ (22.10 cm)
SuperNova II
Depth 6.75″ (17.15 cm) x
Width 18″ (45.72 cm) x
Height 8.7″ (22.10 cm)
cm
HSN
SuperNova Ordering Information
Series
High Output Lamps
H Series SuperNOVA
Hours of Operation
Options
100 90 OPTIONS
90 — 1 ½ Hours
XX — Other Run Times Contact Factory
II —
I — 100 Watt Capacity
200 Watt Capacity
100 Watt — Two (2) 100 Watt Heads
75 Watt — Two (2) 75 Watt Heads
50 Watt — Two (2) 50 Watt Heads
35 Watt — Two (2) 35 Watt Heads
20 Watt — Two (2) 20 Watt Heads
SD Self-Diagnostic Charger & Monitoring System
IR Infrared Remote Test System
TD120 15 Minute Time Delay 120 V
TD277 15 Minute Time Delay 277 V
220V 220 V / 50 Hz Input Transformer
S3 Mounting Shelf (Fits Super Nova I)
S6 Mounting Shelf (Fits Super Nova II)
WGI Wire Guard (Fits Super Nova I)
WGII Wire Guard (Fits Super Nova II)
H120 Battery Heater (120v)
CF Custom Finish (Standard Finish is Cream/Neutral)
Model Size
II
Note: These specifications are subject to change
Example Spec: HSN-II-100-90-SD-IR-S6-CF
Example Spec: H-2-20-12-J BOX-W-LPM
IR Infrared Remote Test System Option Available
H Series Remote Head Fixtures
For additional remote installations, our
powerful, stand-alone heads are available in
single or dual head units. Heads are mounted
to a custom plate with a gasket that fits a single
gang electric box. For additional information
on these remote fixtures, please refer to the H
Series Spec Sheet, or contact Concealite.
H Series Ordering Information
Note: These specifications are subject to change
H2 100 N4X
Series
High Output Lamps
Heads
H
1 Single Head
2 Dual Head
12
Voltage
Options
12 12 VDC
120 120 VAC
N4X NEMA 4X Junction Box
J-BOX NEMA 1 Junction Box
Colors
W White
B Bronze
CF Custom Paint Finish
Lead Wires
LPM Low Profile Mounting System
(Includes 18 inches of Continuous Leads).
WLPM
20 20 Watt Head(s)
35 35 Watt Head(s)
50 50 Watt Head(s)
75 75 Watt Head(s)
100 100 Watt Head(s)
202 Elk Street, P.O. Box 160
Elkton, SD 57026
Phone: (605)542-4444
Fax: (605)542-3333
www.concealite.com
TM
Concealite’s H Series Remote Head fixtures are made of durable, impact-resistant steel housings with the highest light output on the
market… up to 200 Watts! These interior remote fixtures are ideal where emergency lighting codes require expansive illumination such
as large complexes, areas of assembly, or applications with high ceilings.
Powerful.
Practical.
Preferred.
TM
Architectural Features
Aesthetics
H Series Remote Head Fixtures
The H Series remote fixtures are available in
single or dual head units.
Can be configured to operate from a wide
variety of emergency and standard power
sources.
Heads are mounted to a custom plate with a
gasket that fits a single gang electrical box.
Heads come white and bronze as standard
colors.
Custom colors, finishes, and textures
available.
Unique high output, long life halogen lamps
are available in 20, 35, 50, 75, and 100 Watts.
Heads are available in both 12 VDC and
120 VAC.
Heads are UL 924 listed.
For remote installations, our powerful,
stand-alone H Series Remote Fixture heads
are available. The H Series remote high-
powered halogen lamps provide up to 100
watts output each, surpassing anything
currently on the market, and allowing for 20-30
feet above ground wall or vertical support
pillar installations.
Commerical Office Building
Single or Dual Head Remote Fixtures
Custom Paint Finishes Available
© 2009 Concealite Life Safety Products
H Series Remote Heads
FIXTURE TYPE:
LAMP TYPE:
PROJECT NAME/REF:
PROJECT LOCATION:
FIXTURE
SCHEDULE
APPROVAL:
Ordering Information
H Series Remote Heads
Note: These specifications are subject to change
H2 100 N4X
Series
High Output Lamps
Heads
H
1 Single Head
2 Dual Head
12
Voltage
Options
12 12 VDC
120 120 VAC
N4X NEMA 4X Junction Box
J-BOX NEMA 1 Junction Box
Colors
W White
B Bronze
CF Custom Paint Finish
Lead Wires
LPM Low Profile Mounting System
(Includes 18 inches of Continuous
Leads).
WLPM
20 20 Watt Head(s)
35 35 Watt Head(s)
50 50 Watt Head(s)
75 75 Watt Head(s)
100 100 Watt Head(s)
Available Remote Power Options
Note: To order DC central battery systems shown below, contact Concealite for more info.
Backplate dimensions measure 4″ H x 2 ½ » W
12v DC Central Battery Unit
Mounting
Units are designed for mounting to any flat
wall surface in exterior or interior wet location
environments.
Wiring
Route appropriate WP connections via WP
junction box conduit raceway system.
LPM Option: Low Profile Mounting system,
includes 18 inches of continuous leads.
Illumination
The adjustable heads are UL listed. Specially
designed high-output halogen lamps are
available in 20, 35, 50, 75, and 100 watts.
Concealite provides free point-by-point layout
service for code compliance. Contact your
local Concealite representative for details.
Product Specifications
The H Series remote head shall be constructed
from aluminum and have an electrostatic
baked powder coat finish. The head will be
equipped with a locking gasketed swivel and
have ½» fitting at the end of the swivel with a
lock nut to mate with a gasketed custom wall
plate. The head shall be available with 20, 35,
50, 75, &100 Watt high output halogen lamps.
These lamps shall have a minimum 2000 hour
lamp life. The head shall have polished
aluminum reflector and a gasketed glass
lens.The head shall have a separate UL924
listing. The head assembly shall be rated for
NEMA 4X areas.
Limited Warranty
All Concealite equipment is guaranteed against
defects in materials and workmanship by the
manufacturer for a period of three years from date
of shipment under normal operations and proper
use. Correction of all defects shall be by
replacement or repair (at our discretion) and
shall constitute fulfillment of all manufacturer’s
obligations.
202 Elk Street, P.O. Box 160
Elkton, SD 57026
Phone: (605)542-4444
Fax: (605)542-3333
www.concealite.com
TM
v.041917–HRH
TM
Completely self-contained
Models operate for up to four hours
Fully automatic solid-state charger
Automatic battery protection (LVD)
Models for loads up to 300 watts output
Die-formed heavy 18 gauge steel cabinet
Dual 120 or 277 VAC input, field selectable
1-1/2 hours of light to an end battery voltage of
87-1/2% of normal voltage
Listed to UL 924
See Central Battery Systems cut sheet for
more details.
SuperNOVA by Concealite
™
Concealite SuperNOVA 100 Watt High-Output Halogen Lamps
(100 W HO, 2000 Lumens Per Head / 1.35 Average Foot Candle Light Output)
Point by Point Data Results Based on 2,025 SF Space
SuperNOVA (100 W HO, 2000 Lumens Per Head / 1.35 Average Foot Candle Light Output) vs. Market Comparison (20 W, 238 Lumens Per Head / 1.12 Average Foot Candle Light Output)
45′
45′
Market Comparison
Competitors’ 20 Watt Lamps
(20 W, 238 Lumens Per Head / 1.12 Average Foot Candle Light Output)
Point by Point Data Results Based on 2,025 SF Space
SuperNOVA (100 W HO, 2000 Lumens Per Head / 1.35 Average Foot Candle Light Output) vs. Market Comparison (20 W, 238 Lumens Per Head / 1.12 Average Foot Candle Light Output)
45′
45′
SuperNOVA by Concealite
™
SuperNOVA (238 Lumens Per Head / 1.61 Average Foot Candle Light Output)(2000 Lumens Per Head / 1.74 Average Foot Candle Light Output) vs. Market Comparison
Point by Point Data Results Based on 14′ x 100′ Path of Egress Corridor:
Point by Point Data Results Based on 14′ x 100′ Path of Egress Corridor:
Market Comparison
Concealite SuperNOVA 100 Watt High-Output Halogen Lamps
Competitors’ 20 Watt Lamps
(100 W HO, 2000 Lumens Per Head / 1.74 Average Foot Candle Light Output)
(20 W, 238 Lumens Per Head / 1.61 Average Foot Candle Light Output)
14′ 14′
100′
100′
Здравствуйте. В сегодняшнем небольшом обзоре я хочу рассмотреть тестер свинцовых и литиевых аккумуляторных батарей. Давайте разберемся, что же скрывается на самом деле под этим громким названием и куда это можно применить. Если вам это интересно – добро пожаловать под кат.
Заказ был сделан 8 января 2016 года с применением купона 5 от 10 полученном за поинты по акции новогодних носков. Поэтому товар мне обошелся всего в $3.03. Чем была дополнена корзина до 10 долларов, я расскажу в следующем обзоре. Тестер оперативно выслали в тот же день.
Заказ
2 февраля 2016 года я получил пакет на почте:
Пакет
Внутри, в синем полиэтиленовом пакете находился сам тестер, провода и 4 самореза. Хотя крепёжных отверстий у тестера всего 2:
Посмотрим устройство тестера:
Надпись на корпусе микросхемы заботливо сточена. Имеется одна кнопка для выбора типа аккумулятора.
Переключаются типы аккумуляторов так. На выключенном тестере зажимаем кнопку, подключаем тестер к аккумулятору, после чего отпускаем кнопку. Тестер переходит к выбору типа аккумулятора. Кратковременным нажатием на кнопку выбираем нужный режим.
Например, 2S литий:
Или 12 вольтовый свинцовый аккумулятор:
После выбора нужного значения отключаем тестер. Настройки будут сохранены и в дальнейшем тестер всегда будет включаться для данного типа аккумулятора. Для изменения типа – повторяем вышеприведенные действия.
Вот значения режимов с сайта магазина:
P1: Pb12V lead-acid battery
P2: Pb24V lead-acid battery
P3: not work
P4: not work
C2: 2 pcs lithium batteries
C3: 3 pcs lithium batteries
C4: 4 pcs lithium batteries
C5: 5 pcs lithium batteries
C6: 6 pcs lithium batteries
C7: 7 pcs lithium batteries
C8: not work
C15: not work.
Данная табличка выглядит странно по сравнению с описанием тестера:
Specification:
Input voltage:8-30V
Input current:5-12mA
Fit for Battery Type: lead-acid/Pb-Acid battery and Lithium battery
LI 1S/2S /3S / 4S /5S /6S /7S Lead-acid 12V/24V
Куда же делся из таблицы 1S литий, раз в описании он заявлен? Это заинтересовало не только меня, но и одного из покупателей. И он задал этот вопрос представителю магазина на страничке товара. И был им получен ответ:
Спасибо, что поинтересовались!
1. Код батареи С1 1 шт литиевые батареи.
Вам ничего не показалось странным в ответе? А если опять описание посмотреть?
Input voltage:8-30V
Данный тестер просто физически не может работать с 1S литием! Ведь большей частью полностью заряженный 1S литий имеет напряжение 4,2 вольта. А тестер, как выяснилось из реальных испытаний – включается только при подаче на него напряжения в 4,65 вольт. Первый, но не последний секрет раскрыт.
Тестер имеет приятную равномерную зелёную подсветку:
При достижении 5%, деления на аккумуляторе исчезают, контур аккумулятора начинает мигать, подсветка отключается:
Измерим 2 литиевых аккумулятора 18650. Это самый точный мой тестер, при проверке его при помощи ИОН до сотых он измеряет точно. Мне этой точности вполне достаточно. И вот, что мы видим:
И литиево-полимерный аккумулятор:
И остается один вопрос, как же собственно тестирует аккумулятор данный тестер. Один из покупателей так же задал вопрос на странице товара. Он интересовался, как же, собственно, проходит тестирование аккумулятора? Тестер измеряет внутреннее сопротивление? Дает нагрузку на аккумулятор? Как это работает?
И вот, барабанная дробь, ответ представителя магазина в гуглопереводе. С оригиналом можно ознакомится на странице товара:
Емкость батареи тестер может проверить напряжение аккумулятора, напряжение на нагрузке (перепада давления), внутреннее сопротивление, защиту от короткого замыкания, функция защиты время восстановления короткого замыкания, ток разряда, функцией зарядки, выявления сопротивления (R1, R2), прочитать тест кода и мощности ( в том числе заряда и разряда тест).Чтобы продлить срок службы батареи и использовать батарею правильно
Не правда ли, это круто за такую то цену? Этот тестер – просто мечта всех аккумуляторщиков, автомобилистов и моделистов мира.
Но какой же может быть тест короткого замыкания и разряда, если тестер при работе потребляет:
Input current:5-12mA
А в реальности и того меньше. В 2 раза. Миф развенчан? Правильнее это было бы назвать не тестером, а индикатором заряда. Скорее всего в память индикатора зашиты значения напряжения и проценты заряда им соответствующие. Вот этим то мы сейчас и займемся. Посмотрим какое напряжение соответствует каким процентам. Для этого был собран испытательный стенд:
Если тестер измеряет параметры аккумулятора, то он не должен работать от блока питания. Но мы и не будем проверять тестер, мы проверим индикатор. )))
Поскольку имеющийся блок питания выдаёт максимум 15 вольт, я ограничусь только измерениями 3 режимов индикатора. Это 12 вольтовый свинцовый аккумулятор, и 2S и 3S литий.
Свинцовые аккумуляторы не рекомендуется разряжать ниже 11 вольт.
Посмотрим, как поведёт себя индикатор в этом режиме работы. Я не хочу перегружать обзор лишними фотографиями, поэтому я просто дам таблички соответствия. Если кому-то нужны фото, подтверждающие это – я дам их. Но смысла в этом не вижу, на них абсолютно то же самое.
Итак, включаем на индикаторе режим 1P:
13,01В – 100%
12,50В – 75%
12,20В – 50%
11,80В – 25%
11,01В – 0%
Что же, достаточно неплохой результат.
Литиевые батареи в полностью заряженном состоянии в основном имеют 4,2 вольта. 4,35В пока мало распространены. И литий не рекомендуется разряжать ниже 3 вольт. Для 2S это нужно умножить на 2. И для 3S – соответственно, на 3.
Теперь проверим 2S литий, включив режим 2с:
8,30В – 100%
7,75В – 75%
7,37В – 50%
7,00В – 25%
6,00В – 0%
И 3S литий. Режим 3с:
12,49В – 100%
11,65В – 75%
11,13В – 50%
10,53В – 25%
9,05В – 0%
И снова хороший результат»! Несмотря на неточности описания – данный индикатор имеет место быть. Выглядит он красиво и может использоваться в автомобилях, ИБП, моделировании и многих других поделках, в которых для питания используются аккумуляторы. Тем более, что имеет достаточно скромные вес и габариты.
Степень заряженности в процентах, более наглядна, чем напряжение в вольтах. Особенно для далеких от этого людей. Как в мобильнике. Любой поймет, что, например, аккумулятор скоро сядет или наоборот зарядится. Для меня это нужная и полезная вещь, которая скоро будет использована по назначению. В принципе, я и ожидал получить индикатор заряда, а не мифический супер-пупер тестер, проанализировав перед покупкой описание и технические характеристики.
3 доллара он точно стоит.
Reviews with images
Submit a report
A few common reasons customers report reviews:
- Harassment, profanity
- Spam, advertisement, promotions
- Given in exchange for cash, discounts
When we get your report, we’ll check if the review meets our Community guidelines. If it doesn’t, we’ll remove it.
Sorry we couldn’t load the review
Thank you for your feedback
Sorry, there was an error
Please try again later.
-
Sort reviews by
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on July 24, 2023
The media could not be loaded.
The product it says waterproof, but after I installed and turn on the e-bike, the meter does not work. Can I return a damaged product? Please see the video attached.
Reviewed in the United States on April 10, 2023
Color: BlackVine Customer Review of Free Product( What’s this? )
So this little voltometer is perfect for tracking the exact amount of battery power remaining in your electric vehicles although it lacks mounting options and has really short wires out of the box. I added extensions to both wires so I could attach the device to my handle bar extender making it easy to track how much power remains in my e-bike battery. Programming it can be a bit tricky so I suggest using the custom programming option as explained in the instructions. I have a 360w E-bike with a battery that maxes capacity at 42v and it dies at 32v so that is the information I programmed into the voltometer and it works perfectly. It shows the exact voltage used by the battery in real time and also can determine how much your maximum voltage has degraded from your battery over time. For example after a bit over a year of use my battery reaches a full charge at 41.6v so my maximum capacity has decreased by 00.4v throughout its lifetime so far. Due to this I reprogrammed it to read as 100% at a 41.6v output and 0% at 32v. I docked a star from my review due to the extremely short length of the wires making it a bit more of a hassle in my situation although it was a simple task to resolve the issue. As long as you have spare wires and know how to properly connect them you will be perfectly fine. 4 out of 5 stars on this product overall. If anything notable happens regarding this product during my time using it I’ll update my review for you here. Hope it helps and thank you for taking the time to read it. 😊
Reviewed in the United States on April 15, 2023
Color: BlackVine Customer Review of Free Product( What’s this? )
This works well and was a super easy install if you have even the most rudimentary electrical skills (i.e. can strip and connect wires to a battery terminal). The display is bright, and the instructions are easy to follow to get it set up for your system.
I wanted to set up a meter that only comes on when I turn the key, but this is such a low amp draw, AND has an off timer, AND you can just turn it off with the push of a button that I didn’t worry about it.
Only negative is that you can only really read the display head on, so it’s not really easy to see on the golf cart where I put it. Still handy to check before getting under way.
4.0 out of 5 stars
Works well, easy install
Reviewed in the United States on April 15, 2023
This works well and was a super easy install if you have even the most rudimentary electrical skills (i.e. can strip and connect wires to a battery terminal). The display is bright, and the instructions are easy to follow to get it set up for your system.
I wanted to set up a meter that only comes on when I turn the key, but this is such a low amp draw, AND has an off timer, AND you can just turn it off with the push of a button that I didn’t worry about it.
Only negative is that you can only really read the display head on, so it’s not really easy to see on the golf cart where I put it. Still handy to check before getting under way.
Images in this review
Reviewed in the United States on April 9, 2023
Color: BlackVine Customer Review of Free Product( What’s this? )
When I first received this battery monitor, I thought it was pretty small and that visibility might be an issue. I am happy to report that I was mistaken — the display is highly legible in any light, even from several feet away. Connections are as simple as they can be, just +12 Volts and a Ground.
The only thing to be aware of, is that if you are going to panel mount this monitor, that you will need to be able to cut a pretty precise rectangular hole in sheet metal. A Dremel with a cutoff wheel and a file might be the easiest way to accomplish this by hand. The material thickness of the panel also matters, because the plastic retaining prongs on the meter are tapered to lock things into place, and a panel that is thicker than typical sheet metal might need to be notched in their locations in order for it to fit.
Don’t let a little fabrication to mount this scare you. This is a really good price for a nice little meter. I will be adding it to monitor my trolling motor batteries on my boat.
Reviewed in the United States on April 5, 2023
Color: BlackVine Customer Review of Free Product( What’s this? )
I got this to install on the back of my boat where the battery is.
It was simple to install (just connect the cables to the battery), and run the wire to where you want the display.
Being that it is waterproof, it was perfect as I can have it on the back of the battery cover.
Using it is easy as well as you just push the power button and the readings are displayed.
Great battery monitor
Reviewed in the United States on December 15, 2022
Color: BlackVine Customer Review of Free Product( What’s this? )
Works well on my RV, is always good to know how much battery you have left when camping.
Reviewed in the United States on November 25, 2022
Color: BlackVine Customer Review of Free Product( What’s this? )
Been looking to replace my battery monitor for my Club Car Golf Cart. This battery monitor was an easy replacement solution. The display is very easy to read (especially the bright backlighting), connecting was easy, its all weather which is a big plus living in the midwest and easy to mount. Plus the price is great for this monitor. The only downfall are the instructions. Currently I’m very happy with this battery monitor and highly recommend it.
4.0 out of 5 stars
Decent Golf Cart Battery Monitor!
Reviewed in the United States on November 25, 2022
Been looking to replace my battery monitor for my Club Car Golf Cart. This battery monitor was an easy replacement solution. The display is very easy to read (especially the bright backlighting), connecting was easy, its all weather which is a big plus living in the midwest and easy to mount. Plus the price is great for this monitor. The only downfall are the instructions. Currently I’m very happy with this battery monitor and highly recommend it.
2 people found this helpful
Report
Reviewed in the United States on November 14, 2022
Color: BlackVine Customer Review of Free Product( What’s this? )
I tested this voltage monitor with an adjustable D/C power supply and as I lowered or raised the voltage this meter correctly showed what the voltage was and the percent of voltage from 0 to 100 percent
It does come with a user’s manual, but it is small and very busy with content so may not be as easy to read and understand, but if you experiment with this meter you can figure out how it works
I left this to D/C power for 4 hours and the values still reported the same and unit did not heat up
One negative is the front of the screen is cheaply made and could get scratched up real easy
One person found this helpful
Report
Back to Top
Model Name/Number |
Qs-BM01 |
Brand |
Quick sense |
Model Number |
Qs-BM01 |
Voltage |
70V |
Material |
Plastic |
— Power percentage and voltage are displayed in turn recurrently and automatically.
— Longer service life with Touch switch button. Voltage Range: 8-70V Material: Plastic
The product is suitable for lead-acid 12V, 24V, 36V, 48V (8-70V)
Note: Read description carefully before using, as the device need to be configured first.
A device which is capable to test not only battery capacity but also battery voltage.
TrustSEAL Verified
Importer
Company Video
Looking for more Verified Exporters?
Product Details
Product Specification
Model Name/Number | Qs-BM01 |
Brand | Quick sense |
Model Number | Qs-BM01 |
Voltage | 70V |
Material | Plastic |
Weight | 10g |
Dimensions | 38.7 x 13.8 x 3.1 cm |
Minimum Order Quantity | 50 |
Product Description
- Power percentage and voltage are displayed in turn recurrently and automatically.
- Longer service life with Touch switch button. Voltage Range: 8-70V Material: Plastic
- The product is suitable for lead-acid 12V, 24V, 36V, 48V (8-70V)
- Note: Read description carefully before using, as the device need to be configured first.
- A device which is capable to test not only battery capacity but also battery voltage.
Additional Information
Item Code | QS-BM01 |
Delivery Time | 2-3 days |
Packaging Details | Package Dimensions ¿¿¿ : ¿¿¿ 22.5 x 7.5 x 2.9 cm; 30 Grams Item part number ¿¿¿ : ¿¿¿ QS-BM01 Manufacturer ¿¿¿ : ¿¿¿ Quick Sense |
Interested in this product?Get Latest Price from the seller
Contact Seller
Company Details
About the Company
Year of Establishment2015
Legal Status of FirmIndividual — Proprietor
Nature of BusinessImporter
Number of EmployeesUpto 10 People
Annual TurnoverRs. 5 — 10 Crore
IndiaMART Member SinceJan 2015
GST06CDMPB6409B1ZZ
Import Export Code (IEC)CDMPB*****
Established in the year of 2015, we «Quick Sense Innovations» are manufacturing, wholesaling and retailing of PIR Motion Sensor, PIR Detector, Energy Saving Switch and many more. We are well-supported by our team of highly skilled professionals who possess rich industry experience in their respective domains of business operations. Their strong support makes us able to provide the utmost level of satisfaction to our clients.Contact Ms. Sapna Sharma +91-9667693980.
Company Video
Seller Contact Details
165 A, Ward No. 5, Bassa Para, Old Faridabad Faridabad — 121002, Haryana, India
Get Directions
0
0
1
Have a requirement?
Chat with us