Инструкция tp link re650 ac2600

• Покрытие RE650
• Beamforming
• Покрытие роутера
• Покрытие другого усилителя
  без Beamforming

Больше быстрых подключений для всех

Технология MU-MIMO позволяет RE650 передавать данные 4 устройствам одновременно, снижая время ожидания и увеличивая пропускную способность Wi-Fi для каждого устройства. Благодаря MU-MIMO RE650 работает в 4 раза быстрее стандартного усилителя сигнала стандарта AC.

MU-MIMO RE650

Одновременно передаёт данные множеству устройств

Гигабитное
проводное подключение

Гигабитный порт Ethernet RE650 позволяет подключать проводные устройства, такие как Smart TV и игровые консоли, создавая быстрые и надёжные проводные соединения.

Умный индикатор сигнала
для правильного размещения

Умный индикатор сигнала позволит найти
лучшее место для установки RE650.

• Син.

  Хорошее соединение

• Крас.

  Слишком далеко от роутера

Встроенный режим точки доступа

RE650 – это больше, чем усилитель Wi-Fi сигнала. Подключите к его порту кабель Ethernet и создайте 4×4 MU-MIMO двухдиапазонную Wi-Fi точку доступа.****

Надёжные двухдиапазонные соединения

Если один из каналов Wi-Fi роутера перестаёт работать, или если роутер работает только на одной частоте, RE650 всё равно сможет обеспечить надёжное двухдиапазонное подключение для всех устройств.

• Традиционный усилитель

• Основной роутер

• RE650

• Page 1
  User Guide AC2600 MU-MIMO Wi-Fi Range Extender RE650 1910012834 REV2.0.0…

• Page 2: Table Of Contents

  4. 3. 1. Add TP-Link ID to Manage the Extender ……

• Page 3
  6. 2. Control LEDs …………. . . 32 6.

• Page 4: About This Guide

  Operating temperature, storage temperature, and other specifications can be found on the product page at https://www.tp-link.com. TP-Link Community is provided for you to discuss our products and share knowledge at https://community.tp-link.com/. Our Technical Support contact information can be found at the Contact Technical Support page at https://www.tp-link.com/support.

• Page 5: Chapter 1 Get To Know About Your Extender

  Chapter Get to Know About Your Extender This chapter introduces what the extender can do and its appearance. It contains the following sections: • Product Overview • Appearance…

• Page 6: Product Overview

  Get to Know About Your Extender Product Overview Bring Dead Zones Back to Life Tired of Wi-Fi “dead zones”? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached.

• Page 7
  Chapter 1 Get to Know About Your Extender 1 2 1 LED Explanation You can check the extender’s working status by following the LED Explanation table. Name Status Indication The extender is connected to your router’s wireless network Solid blue and is in a suitable location.

• Page 8: Chapter 2 Set Up Internet Connection

  Chapter Set Up Internet Connection This chapter introduces how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection. It contains the following sections: • Power On the Extender • Set Up the Extender…

• Page 9: Power On The Extender

  For safety, only plug the extender in upright direction as shown below. Set Up the Extender There are three ways to set up the extender: via the TP-Link Tether app, via a web browser, or via the WPS button. 2 2 1 Method 1: Via the TP-Link Tether App 1.

• Page 10
  Chapter 2 Set Up Internet Connection 3. Tap the + icon on the upper-right corner and select Range Extender. 4. Follow app instructions to set up your extender. 5. (Optional) If your host router supports OneMesh, you can enable Join Onemesh copy the router’s wireless settings for seamless roaming.

• Page 11: Method 2: Via A Web Browser

  Chapter 2 Set Up Internet Connection Tip: For more intuitive location assistance, access extender settings via Tether and go to Tools > Location Assistant. You can also manage your extender via Tether, such as controlling LEDs, sharing passwords of your networks and blocking devices.

• Page 12
  Chapter 2 Set Up Internet Connection Note: If the login window does not appear, please refer to FAQ. 2 ) Select your host router’s 2.4GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next. 3 ) Select your host router’s 5GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next.
• Page 13
  Next. Tip: If you connect the extender to a TP-Link OneMesh router, the extender will automatically join the router’s OneMesh network and copy the router’s wireless settings. For more information, refer to OneMeshTM with Seamless Roaming.

• Page 14: Method 3: Via The Wps Button

  Chapter 2 Set Up Internet Connection Enjoy! Connect to the extended network and enjoy the internet. 2 2 3 Method 3: Via the WPS Button Use this way if your router has a WPS button. The button might look like one of these: 1.

• Page 15
  WPS connection is successful. Note: If the LED does not turn solid on, try again or refer to Method 1: Via the TP-Link Tether App Method 2: Via a Web Browser. 3. If the extender connects to a dual band router, repeat steps 1 and 2 above to connect to the other band.
• Page 16
  Chapter 2 Set Up Internet Connection Suitable location Too far from router No connection Router Devices Halfway Tip: To minimize signal interference, please choose a location which is far away from Bluetooth devices and other household electronic devices, such as cordless phones, microwave ovens and baby monitors. Enjoy! Connect to the extended network and enjoy the internet.

• Page 17: Chapter 3 Onemesh With Seamless Roaming

  Chapter OneMesh with Seamless Roaming This chapter introduces the TP-Link OneMesh feature. It contains the following sections: • What‘s a OneMesh Network • How to Set Up a OneMesh Network…

• Page 18: What’s A Onemesh

  Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router’s web management page. To check full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/onemesh/compatibility.

• Page 19: Tm Network

  Chapter 3 OneMeshTM with Seamless Roaming How to Set Up a OneMesh Network Once the extender is connected to a TP-Link OneMesh router via any method, the extender will automatically join the router’s OneMesh network and copy the router’s wireless settings. You can manage all mesh devices in the OneMesh network all on your router’s web page.

• Page 20: Chapter 4 Tp-Link Cloud Service

  TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your cloud device with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app on your smartphone or tablet.

• Page 21: Register A Tp-Link Id

  Manage the User TP-Link IDs. • Once you have registered a TP-Link ID on the web management page, you can only register another TP-Link ID via the Tether APP. Please refer to Manage the Extender via the TP-Link Tether App to install the app and register a new one.

• Page 22: Manage The User Tp-Link Ids

  Password. 2. Enter the current password, then a new password twice. And click Save. Manage the User TP-Link IDs The TP-Link ID used to log in to the extender for the first time will be automatically bound as the Admin account.

• Page 23: Add Tp-Link Id To Manage The Extender

  3. Click , enter another TP-Link ID as needed and click Save. Note: If you need another TP-Link ID, please register a new one via the Tether app. Please refer to Manage the Extender via the TP-Link Tether App to install the app and register a new TP-Link ID.

• Page 24: Manage The Extender Via The Tp-Link Tether App

  Tether” or simply scan the QR code to download and install the app. 2. Launch the Tether app and log in with your TP-Link ID. Note: If you don’t have a TP-Link ID, create one first. 3. Connect your device to the extender’s or host router’s wireless network.

• Page 25: Chapter 5 Customize Your Network

  Chapter Customize Your Network This chapter guides you on how to configure network settings that are available for this extender. It contains the following sections: • Check Internet Status • Configure Wireless Network • Change LAN Settings • Adjust Wi-Fi Coverage •…

• Page 26: Check Internet Status

  You can view the internet status of your extender to check whether you have successfully set up the extended network(s). 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >…

• Page 27: Configure Wireless Network

  If the extender is in your router’s OneMesh network, it will automatically copy wireless settings from your router. No wireless settings is needed for the extender. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender.

• Page 28
  Chapter 5 Customize Your Network 5. Click Save. • To enable or disable the extended network: 1. Go to Settings > Wireless > Extended Network. 2. Extended networks are enabled by default. If you want to disable the wireless function of a certain band, just clear the Enable checkbox.

• Page 29: Change Lan Settings

  If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >…

• Page 30: Set Access Control

  If the extender is in your router’s OneMesh network, it will automatically copy access control settings from your router. No access control settings is needed for the extender. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >…

• Page 31
  Chapter 5 Customize Your Network 2. Select the device to be blocked in the Online Devices table by ticking the corresponding checkbox. 3. Click Block and the selected device(s) will be added to the Devices in Blacklist table. 4. Click in the Devices in Blacklist table to set the…

• Page 32: Set High Speed Mode

  5GHz bands are both enabled. Additionally, if you are going to disable the 2.4GHz network, it’s recommended to first make sure all your wireless devices support 5GHz network connection. 1. Visit http://tplinkrepeater.net and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >…

• Page 33
  Chapter 5 Customize Your Network 4. Select the Auto mode. The extender will decide which band the high-speed network will work on based on its wireless connection to your router. 5. Click Save.

• Page 34: Chapter 6 Manage Your Extender

  Chapter Manage Your Extender This chapter presents how to manage and maintain your extender. It includes the following sections: • Set System Time • Control LEDs • Set Power Schedule • Upgrade the Firmware • Backup and Restore Configuration Settings •…

• Page 35: Set System Time

  Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be sychronized with the daylight saving time you configure. 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender.

• Page 36: Set Power Schedule

  Chapter 6 Manage Your Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > Control. • To turn off the LEDs: Disable Status.

• Page 37: Upgrade The Firmware

  • Do NOT power off the extender during the firmware upgrade. • To upgrade the firmware online: 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. When the latest firmware is available for your extender, the update icon will display in the top-right corner of the page.

• Page 38: Backup And Restore Configuration Settings

  To upgrade the firmware locally: 1. Download the latest firmware file for the extender from our website www.tp-link.com. 2. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 3. Go to Settings >…

• Page 39: Change Login Password

  Chapter 6 Manage Your Extender • To backup configuration settings: Click Backup to save a copy of the current settings to your local computer. A ‘.bin’ file of the current settings will be stored on your computer. • To restore configuration settings: 1.

• Page 40: Check System Log

  Chapter 6 Manage Your Extender 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings > System Tools > Admin Account. 3. Enter the old password. Then enter the new password twice (case-sensitive) and click Save.

• Page 41
  Chapter 6 Manage Your Extender…

• Page 42: Chapter 7 More Features Of Your Extender

  Chapter More Features of Your Extender This chapter explains how to use the extender as a wireless adapter and as an access point. It contains the following sections: • Use Your Extender as a Wireless Adapter • Transform Your Existing Wired Network to a Wireless One…

• Page 43: Use Your Extender As A Wireless Adapter

  The extender can work as an access point, transforming your existing wired network to a wireless one. 7 2 1 Set Up the Extender as an Access Point 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Click Mode in the top right corner of the page.

• Page 44
  Chapter 7 More Features of Your Extender 4. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 5. Go to Quick Setup to configure your extender. 1 ) Configure your wireless settings and click Next.

• Page 45: Method 1: Connect To The Extender Manually

  Wireless devices that support WPS, including Android phones, tablets and most USB network cards, can be connected to your extender through this method (not supported by iOS devices). 1. Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set for the extender. 2. Go to Settings >…

• Page 46
  Q1 How to reset the extender to its factory default settings? • With the extender powered on, use a pin to press the Reset button for 1 second. The extender will reboot. • Log in to the extender’s web management page. Go to Settings >…
• Page 47
  1. Log in to your router and disable the MAC filter, wireless access control or ACL. Note: For more information about how to disable your router’s MAC filter, wireless access control or ACL, please refer to your router’s user guide. 2.
• Page 48
  Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd.
• Page 49
  FCC compliance information statement Product Name: AC2600 MU-MIMO Wi-Fi Range Extender Model Number: RE650 Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com…
• Page 50
  This device is restricted in indoor environment only. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
• Page 51
  5250 MHz -5350 MHz (23dBm) 5470 MHz -5725 MHz (30dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of…
• Page 52
  L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2.
• Page 53
  • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋 開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位 置中。 • 不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。 限用物質含有情況標示聲明書 設備名稱： 型號（型式）： Equipment name Type designation (Type) AC2600 MU-MIMO Wi-Fi Range Extender RE650 限用物質及其化學符號 Restricted substances and its chemical symbols 單元 六價鉻 多溴聯苯 多溴二苯醚 鉛 汞 鎘 Ｕnit Hexavalent Polybrominated Polybrominated…
• Page 54
  Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Page 55
  Symbol Explanation Protective earth Caution, risk of electric shock Fuse is used in neutral N…