Кондиционер lg ls j0762hl инструкция

Краткое описание гарантии производителя

Точные условия гарантии доступны в гарантийном талоне, входящем в обязательный пакет документов, прилагаемых при покупке техники.

Если вам необходим ремонт, воспользуйтесь онлайн заявкой на ремонт или свяжитесь с нами.Пожалуйста, заранее подготовьте серийный номер вашего изделия и документы, подтверждающие покупку (чек). В негарантийных случаях может взиматься плата за диагностику, ремонтные работы и запчасти.

More products and manuals for Split-system air conditioners LG

Functions

• Room temperature sensor. (THERMISTOR)

• Maintains the room temperature in accordance with the Setting Temp. 

• Indoor fan is delayed for 5 sec at the starting.

• Restarting is inhibited for approx. 3 minutes.

• High, Med, Low, CHAOS

— Lights up in operation

— Lights up in Sleep Mode

— Lights up in Timer Mode

— Lights up in Defrost Mode (for Heating Model)

OUTDOOR — Lights up in compressor operation (for Cooling Model)

• Intermittent operation of fan at low speed.

• The fan is switched to low(Cooling), med(Heating) speed.
• The unit will be stopped after 1, 2, 3, 4, 5, 6, 7 hours.

• The fan is switched to intermittent or irregular operation
• The fan speed is automatically switched from high to low speed. 

• The louver can be set at the desired position or swing 

up and down automatically. 

Indoor Unit

Operation ON/OFF by Remote controller

Sensing the Room Temperature

Room temperature control

Starting Current Control

Time Delay Safety Control

Indoor Fan Speed Control

Operation indication Lamps (LED)

Soft Dry Operation Mode

• Both the indoor and outdoor fan

stops during defrosting.

• The indoor fan stops until the 

evaporator pipe temperature will be
reached at 28°C.

Sleep Mode Auto Control

Natural Air Control by CHAOS Logic

Airflow Direction Control

-3-

Defrost(Deice) control (Heating)

Hot-start Control (Heating)

-4-

Healthy Dehumidification Operation Mode.(       )

Remote Controller

Operation ON/OFF

Reset

Operation Mode Selection

Temperature Setting

Timer Selection

Timer Setting

JET COOL

Timer Cancel

Sleep Operation

Airflow Direction Control

(Cooling 

model only)

(Heating 

model only)

TEMPERATURE

LOW

HIGH

Cooling Operation Mode.(       )

Heating Operation Mode.(       )

Auto Operation Mode.(       )

Fan Operation Mode

Horizontal Airflow Direction Control Button(Option)

Room, Temperature Display

Setting the Time or Timer

PLASMA(Option)/NEGATIVE ION(Option)

ON

OFF

SET

PLASMA

CANCEL

Fan Speed Selection

(Low)

(Med)

(High)

(CHAOS)

: (High:39°C

Low:11°C)

: OFF, ON, OFF                ON

: Cancel Sleep Mode, Timer ON or Timer OFF

: 1, 2, 3, 4, 5, 6, 7,  Off Timer

: Fan Operates without cooling or heating.

Cooling

Down to 18°C
Up to 30°C

Heating

Down to 16°C
Up to 30°C

Installation 

1. Installation of indoor, Outdoor unit 

-21-

More than 2.3 m

More than 5 cm

More than 

5 cm

More than 

5 cm

More than 10 cm

More than 10 cm

More than 70 cm

1) Selection of the best location

1. Indoor unit

2. Outdoor unit

• 

There should not be any heat source or steam
near the unit.

• There should not be any obstacles to prevent the

air circulation.

• A place where air circulation in the room will be

good.

• A place where drainage can be easily obtained.

• A place where noise prevention is taken into con-

sideration.

• Do not install the unit near the door way.

• Ensure the spaces indicated by arrows from the

wall, ceiling, fence or other obstacles.

• If an awning is built over the unit to prevent

direct sunlight or rain exposure, be careful
that heat radiation from the condenser is not
restricted.

• There should not be any animals or plants

which could be affected by hot air dis-
charged.

• Ensure the correct distance is left from the

wall, ceiling, fence, or other obstacles as indi-
cated in the diagram.

Install the indoor unit on the wall where the height
from the floor is more than 2.3 meters.

CAUTION

-30-

Pull the right and
the left side.

Screw

1) Checking the Drainage

1. Remove the Grille from the cabinet.

• Set the up-and-down air direction louver to  the

open position (horizontally) by finger pressure.

• Remove the securing screws.

• To remove the Grille, pull lower the left and right

side of the grille toward you (slightly tilted) and lift
it straight upward (Two tabs on the top inside edge
of chassis are clear of their slots).

2. Check the drainage.

• Pour a glass of water on the evaporator.

• Ensure if water flows drain hose of indoor unit

without any leakage.

4. Checking the Drainage and Connecting the cable to Indoor unit

• Руководства по ремонту
  
  1
  

LG LS-J0762HL (Кондиционеры) сервис мануалы в PDF-формате помогут найти неполадки и ошибки, а также осуществить ремонт LG LS-J0762HL и восстановить работу устройства.