Материнская плата gigabyte b550m aorus pro p инструкция

• Contents

• Table of Contents

• Bookmarks

Summary of Contents for Gigabyte B550M AORUS PRO-P

Какая ширина Gigabyte B550M Aorus Pro-P?

Gigabyte B550M Aorus Pro-P имеет ширину 244 mm.

Какая толщина Gigabyte B550M Aorus Pro-P?

Gigabyte B550M Aorus Pro-P имеет толщину 244 mm.

Какой тип USB-подключения Gigabyte B550M Aorus Pro-P имеет?

Gigabyte B550M Aorus Pro-P имеет USB Type-A, USB Type-C подключение.

Инструкция Gigabyte B550M Aorus Pro-P доступно в русский?

К сожалению, у нас нет руководства для Gigabyte B550M Aorus Pro-P, доступного в русский. Это руководство доступно в английский.

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

For more product details, please visit GIGABYTE’s website.

Copyright

© 2020 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE’s prior written permission.

In order to assist in the use of this product, carefully read the User’s Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: «REV: X.X.» For example, «REV:

1.0″ means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

— 3 —

Table of Contents

B550M AORUS PRO-P Motherboard Layout …………………………………………………………4

Chapter 1 Hardware Installation ………………………………………………………………………….5

1-1 Installation Precautions ………………………………………………………………………… 5

1-2 Product Specications ………………………………………………………………………….. 6

1-3 Installing the CPU ……………………………………………………………………………….. 9

1-4 Installing the Memory …………………………………………………………………………… 9

1-5 Installing an Expansion Card ………………………………………………………………. 10

1-6 Back Panel Connectors ………………………………………………………………………. 10

1-7 Internal Connectors ……………………………………………………………………………. 13

Chapter 2 BIOS Setup ……………………………………………………………………………………..21

2-1 Startup Screen ………………………………………………………………………………….. 21

2-2 The Main Menu …………………………………………………………………………………. 22

2-3 Favorites (F11) ………………………………………………………………………………….. 23

2-4 Tweaker ……………………………………………………………………………………………. 24

2-5 Settings ……………………………………………………………………………………………. 27

2-6 System Info. ……………………………………………………………………………………… 32

2-7 Boot …………………………………………………………………………………………………. 33

2-8 Save & Exit ……………………………………………………………………………………….. 36

Chapter 3 Appendix …………………………………………………………………………………………37

3-1 Conguring a RAID Set ………………………………………………………………………. 37

3-2 Drivers Installation ……………………………………………………………………………… 39

Regulatory Notices ………………………………………………………………………………………. 40

Contact Us …………………………………………………………………………………………………. 44

— 4 —

B550M AORUS PRO-P Motherboard Layout

Box Contents

5B550M AORUS PRO-P motherboard 5Two SATA cables

5Motherboard driver disc

5User’s Manual

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

USB20

DP_HDMI

U32G2C

U32_2

U32_1

U32G2_LAN

ATX

AUDIO

DDR4_A1

DDR4_A2

DDR4_B1

DDR4_B2

ATX_12V

AMD B550

CLR_CMOS

M_BIOS

PCIEX4

PCIEX16

SYS_FAN2

CODEC

B550M AORUS PRO-P

F_PANEL

F_USB1 F_U32

SYS_FAN3 F_USB2

D_LED2

LED_C1

LED_C2

D_LED1

F_AUDIO

SYS_FAN1

LED_CPU

CPU_OPT

iTE®

Super I/O

M2A_CPU

4280110

M2B_SB

4280

SATA3

2 0

3 1

BAT

Realtek® 2.5GbE

LAN

Socket AM4

CPU_FAN

60

60

TPM

COM

USB 2.0 Hub

PCIEX1

QFLASH_PLUS

QFLED

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user’s

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

— 5 —

1-2 ProductSpecications

CPU AMD Socket AM4, support for:

3rd Generation AMD Ryzen™ processors/

3rd Generation AMD Ryzen™ with Radeon™ Graphics processors

(Go to GIGABYTE’s website for the latest CPU support list.)

Chipset AMD B550

Memory  4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Support for DDR4 3200/2933/2667/2400/2133 MHz memory modules

Dual channel memory architecture

Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme Memory Prole (XMP) memory modules

(Go to GIGABYTE’s website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated in the 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors:

— 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz

* Support for HDMI 2.1 version, HDCP 2.3, and HDR.

— 1 x DisplayPort, supporting a maximum resolution of 5120×2880@60 Hz

* Support for DisplayPort 1.4 version, HDCP 2.3, and HDR.

Maximum shared memory of 16 GB

Audio Realtek® ALC1200 codec

High Denition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Realtek® 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)

Expansion Slots 1 x PCI Express x16 slot (PCIEX16), integrated in the CPU:

— 3rd Generation AMD Ryzen™ processors support PCIe 4.0 x16 mode

— 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors support

PCIe 3.0 x16 mode

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot (PCIEX4), integrated in the Chipset:

— Supporting PCIe 3.0 x4 mode

1 x PCI Express x1 slot (PCIEX1), integrated in the Chipset:

— Supporting PCIe 3.0 x1 mode

Storage Interface  1 x M.2 connector (M2A_CPU), integrated in the CPU, supporting Socket 3,

M key, type 2242/2260/2280/22110 SSDs:

— 3rd Generation AMD Ryzen™ processors support SATA and PCIe 4.0 x4/x2

SSDs

— 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors support

SATA and PCIe 3.0 x4/x2 SSDs

 1 x M.2 connector (M2B_SB), integrated in the Chipset, supporting Socket 3,

M key, type 2242/2260/2280 SSDs:

— Supporting SATA and PCIe 3.0 x4/x2 SSDs

4 x SATA 6Gb/s connectors, integrated in the Chipset:

— Support for RAID 0, RAID 1, and RAID 10

— 6 —

USB CPU:

— 4 x USB 3.2 Gen 1 ports on the back panel

Chipset:

— 1 x USB Type-C™ port on the back panel, with USB 3.2 Gen 2 support

— 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel

— 2 x USB 3.2 Gen 1 ports available through the internal USB header

— 4 x USB 2.0/1.1 ports available through the internal USB headers

Chipset+1 USB 2.0 Hub:

— 4 x USB 2.0/1.1 ports on the back panel

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 8-pin ATX 12V power connector

1 x CPU fan header

1 x water cooling CPU fan header

3 x system fan headers

2 x addressable LED strip headers

2 x RGB LED strip headers

1 x CPU cooler LED strip/RGB LED strip header

2 x M.2 Socket 3 connectors

4 x SATA 6Gb/s connectors

1 x front panel header

1 x front panel audio header

1 x USB 3.2 Gen 1 header

2 x USB 2.0/1.1 headers

1 x serial port header

 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S

module only)

1 x Clear CMOS jumper

Back Panel

Connectors

4 x USB 2.0/1.1 ports

1 x DisplayPort

1 x HDMI port

4 x USB 3.2 Gen 1 ports

1 x USB 3.2 Gen 2 Type-A port (red)

1 x USB Type-C™ port, with USB 3.2 Gen 2 support

1 x Q-Flash Plus button

1 x RJ-45 port

1 x optical S/PDIF Out connector

5 x audio jacks

I/O Controller iTE® I/O Controller Chip

— 7 —

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Water cooling ow rate detection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 1 x 256 Mbit ash

Use of licensed AMI UEFI BIOS

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functions of each application may also vary depending on motherboard specications.

— @BIOS

— EasyTune

— Fast Boot

— Game Boost

— ON/OFF Charge

— RGB Fusion

— Smart Backup

— System Information Viewer

Support for Q-Flash Plus

Support for Q-Flash

Support for Xpress Install

Bundled

Software

Norton® Internet Security (OEM version)

Realtek® 8125 Gaming LAN Bandwidth Control Utility

Operating

System Support for Windows 10 64-bit

Form Factor Micro ATX Form Factor; 24.4cm x 24.4cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

Please visit GIGABYTE’s website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the SupportUtility List

page on GIGABYTE’s website to

download the latest version of apps.

— 8 —

Please visit GIGABYTE’s website for details on hardware installation.

DualChannelMemoryConguration

This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory

is installed, the BIOS will automatically detect the specications and capacity of the memory. Enabling Dual

Channel memory mode will double the original memory bandwidth.

The four memory sockets are divided into two channels and each channel has two memory sockets as following:

Channel A: DDR4_A1, DDR4_A2

Channel B: DDR4_B1, DDR4_B2

1-3 Installing the CPU

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE’s website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly.

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•Set the CPU host frequency in accordance with the CPU specications. It is not recommended

that the system bus frequency be set beyond hardware specications since it does not meet the

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications, please do so according to your hardware specications including the CPU, graphics

card, memory, hard drive, etc.

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE’s website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

Installing the CPU

Completely lift up the CPU socket locking lever. Locate the pin one (denoted by a small triangle) of the CPU

socket and the CPU. Once the CPU is positioned into its socket, place one nger down on the middle of the

CPU, lowering the locking lever and latching it into the fully locked position.

AM4 Socket

A Small Triangle

Marking Denotes Pin

One of the Socket AM4 CPU

A Small Triangle

Marking Denotes CPU

Pin One

1-4 Installing the Memory

— 9 —

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory

of the same capacity, brand, speed, and chips be used.

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-6 Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices.

DisplayPort (Note 1)

DisplayPort delivers high quality digital imaging and audio, supporting bi-directional audio transmission.

DisplayPort can support both DPCP and HDCP 2.3 content protection mechanisms. It provides improved

visuals supporting Rec. 2020 (Wide Color Gamut) and High Dynamic Range (HDR) for Blu-ray UHD

playback. You can use this port to connect your DisplayPort-supported monitor. Note: The DisplayPort

Technology can support a maximum resolution of 5120×2880@60 Hz but the actual resolutions supported

depend on the monitor being used.

HDMI Port (Note 1)

The HDMI port is HDCP 2.3 compliant and supports Dolby TrueHD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 7.1-channel LPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 4096×2160@60 Hz, but the actual resolutions supported are dependent on the monitor being

used.

USB 3.2 Gen 1 Port

The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specication and is compatible to the USB 2.0

specication. Use this port for USB devices.

After installing the DisplayPort/HDMI device, make sure to set the default sound playback device

to DisplayPort/HDMI. (The item name may differ depending on your operating system.)

Recommanded Dual Channel Memory Conguration:

DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

2 Modules — — DS/SS — — DS/SS

4 Modules DS/SS DS/SS DS/SS DS/SS

(SS=Single-Sided, DS=Double-Sided, «- -«=No Memory)

— 10 —

USB 3.2 Gen 2 Type-A Port (Red)

The USB 3.2 Gen 2 port supports the USB 3.2 Gen 2 specication and is compatible to the USB 3.2 Gen 1

and USB 2.0 specication. Use this port for USB devices.

USB Type-C™ Port

The reversible USB port supports the USB 3.2 Gen 2 specication and is compatible to the USB 3.2 Gen 1

and USB 2.0 specication. Use this port for USB devices.

Center/Subwoofer Speaker Out

Use this audio jack to connect center/subwoofer speakers.

Rear Speaker Out

Use this audio jack to connect rear speakers.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

Line In/Side Speaker Out

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out/Front Speaker Out

The line out jack.

Mic In/Side Speaker Out

The Mic in jack.

Q-Flash Plus Button (Note 2)

Q-Flash Plus allows you to update the BIOS when your system is off (S5 shutdown state). Save the latest

BIOS on a USB thumb drive and plug it into the Q-Flash Plus port, and then you can now ash the BIOS

automatically by simply pressing the Q-Flash Plus button. The QFLED will ash when the BIOS matching

and ashing activities start and will stop ashing when the main BIOS ashing is complete.

USB 3.2 Gen 1 Port (Q-Flash Plus Port)

The USB 3.2 Gen 1 port supports the USB 3.2 Gen 1 specication and is compatible to the USB 2.0 specication.

Use this port for USB devices. Before using Q-Flash Plus (Note 2), make sure to insert the USB ash drive into

this port rst.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 2.5 Gbps data rate. The following

describes the states of the LAN port LEDs.

•When removing the cable connected to a back panel connector, rst remove the cable from your device and

then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical

short inside the cable connector.

(Note 1) For 3rd Generation AMD Ryzen™ with Radeon™ Graphics processors only.

(Note 2) To enable the Q-Flash Plus function please visit the «Unique Features» webpage of GIGABYTE’s

website.

Connection/

Speed LED Activity LED

LAN Port

Connection/Speed LED:

State Description

Orange 2.5 Gbps data rate

Green 1 Gbps data rate

Off 100 Mbps data rate

Activity LED:

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

— 11 —

If you want to install a Side Speaker, you need to retask either the Line in or Mic in jack to be

Side Speaker out through the audio driver.

Audio Jack Congurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

Center/Subwoofer Speaker

Out a a

Rear Speaker Out a a a

Line In/Side Speaker Out a

Line Out/Front Speaker Out a a a a

Mic In/Side Speaker Out a

Please visit GIGABYTE’s website for details on conguring the audio software.

— 12 —

1-7 Internal Connectors

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1) ATX_12V

2) ATX

3) CPU_FAN

4) SYS_FAN1/2/3

5) CPU_OPT

6) D_LED1/D_LED2

7) LED_CPU

LED_C1/LED_C2

9) SATA3 0/1/2/3

10) M2A_CPU/M2B_SB

11) F_PANEL

12) F_ AUDIO

13) F_U32

14) F_USB1/F_USB2

15) TPM

16) COM

17) CLR_CMOS

18) BAT

1114

2

4

9

4 1713612

1

4

158

7

10

3 6 85

16 18

10

— 13 —

131

2412

ATX

1/2) ATX_12V/ATX (2×4 12V Power Connector and 2×12 Main Power Connector)

With the use of the power connector, the power supply can supply enough stable power to all the components

on the motherboard. Before connecting the power connector, rst make sure the power supply is turned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used (500W or greater). If a power supply is used that does not provide the

required power, the result can lead to an unstable or unbootable system.

ATX:

Pin No. Denition Pin No. Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON (soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 5VSB (stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V (Only for 2×12-pin

ATX)

23 +5V (Only for 2×12-pin ATX)

12 3.3V (Only for 2×12-pin ATX) 24 GND (Only for 2×12-pin ATX)

ATX_12V:

Pin No. Denition Pin No. Denition

1 GND (Only for 2×4-pin 12V) 5 +12V (Only for 2×4-pin 12V)

2 GND (Only for 2×4-pin 12V) 6 +12V (Only for 2×4-pin 12V)

3 GND 7 +12V

4 GND 8 +12V

ATX_12V

41

85

3/4) CPU_FAN/SYS_FAN1/2/3 (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is

the ground wire). The speed control function requires the use of a fan with fan speed control design. For

optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

CPU_FAN/SYS_FAN1 SYS_FAN2

1

1

Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

SYS_FAN3

1

•Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•These fan headers are not conguration jumper blocks. Do not place a jumper cap on the headers.

— 14 —

5) CPU_OPT (Water Cooling CPU Fan Header)

The fan header is 4-pin and possesses a foolproof insertion design. Most fan headers possess a foolproof insertion

design. When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire

is the ground wire). The speed control function requires the use of a fan with fan speed control design.

1

Pin No. Denition

1 GND

2 Voltage Speed Control

3 Sense

4 PWM Speed Control

6) D_LED1/D_LED2 (Addressable LED Strip Headers)

The headers can be used to connect a standard 5050 addressable LED strip, with maximum power rating

of 5A (5V) and maximum number of 1000 LEDs.

Pin No. Denition

1 V (5V)

2 Data

3 No Pin

4 GND

1 1

Connect your addressable LED strip to the header. The power pin

(marked with a triangle on the plug) of the LED strip must be connected

to Pin 1 of the addressable LED strip header. Incorrect connection may

lead to the damage of the LED strip.

D_LED1 D_LED2

Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

7) LED_CPU (CPU Cooler LED Strip/RGB LED Strip Header)

The header can be used to connect a CPU cooler LED strip or a standard 5050 RGB LED strip (12V/G/R/B),

with maximum power rating of 2A (12V) and maximum length of 2m.

Pin No. Denition

1 12V

2 G

3 R

4 B

Connect the CPU cooler LED strip/RGB LED strip to the header. The

power pin (marked with a triangle on the plug) of the LED strip must

be connected to Pin 1 (12V) of this header. Incorrect connection may

lead to the damage of the LED strip.

For how to turn on/off the lights of the LED strip please visit the «Unique Features» webpage of

GIGABYTE’s website.

Addressable LED

Strip

1

RGB LED

Strip

1

12V

1

•Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•These fan headers are not conguration jumper blocks. Do not place a jumper cap on the headers.

— 15 —

9) SATA3 0/1/2/3 (SATA 6Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA

1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support

RAID 0, RAID 1, and RAID 10. Refer to Chapter 3, «Conguring a RAID Set,» for instructions on conguring

a RAID array.

Pin No. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

1

1

SATA3 2 0

3 1

7

7

Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

LED_C1/LED_C2 (RGB LED Strip Headers)

The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power

rating of 2A (12V) and maximum length of 2m.

Pin No. Denition

1 12V

2 G

3 R

4 B

1

For how to turn on/off the lights of the LED strip please visit the «Unique Features» webpage of

GIGABYTE’s website.

LED_C2

1

LED_C1

Connect your RGB LED strip to the header. The power pin (marked with a

triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of

this header. Incorrect connection may lead to the damage of the LED strip.

RGB LED

Strip

1

12V

— 16 —

10) M2A_CPU/M2B_SB (M.2 Socket 3 Connectors)

The M.2 connectors support M.2 SATA SSDs or M.2 PCIe SSDs and support RAID conguration. Please

note that an M.2 PCIe SSD cannot be used to create a RAID set either with an M.2 SATA SSD or a SATA

hard drive. Refer to Chapter 3, «Conguring a RAID Set,» for instructions on conguring a RAID array.

80110 60 42

80 60 42

M2A_CPU

M2B_SB

Follow the steps below to correctly install an M.2 SSD in the M.2 connector.

Step 1:

Locate the M.2 connector where you will install the M.2 SSD, use a screwdriver to unfasten the screw on

the heatsink and then remove the heatsink. (Only the M2A_CPU connector has the heatsink)

Step 2:

Locate the proper mounting hole based on the length of your M.2 SSD drive. If needed, move the standoff

to the desired mounting hole. Insert the M.2 SSD into the M.2 connector at an angle.

Step 3:

Press the M.2 SSD down and then secure it with the screw. Replace the heatsink and secure it to the original

hole. Make sure to remove the protective lm from the bottom of the heatsink before replacing the heatsink.

— 17 —

The front panel design may differ by chassis. A front panel module mainly consists of power switch,

reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis

front panel module to this header, make sure the wire assignments and the pin assignments are

matched correctly.

Some chassis provide a front panel audio module that has separated connectors on each wire

instead of a single plug. For information about connecting the front panel audio module that has

different wire assignments, please contact the chassis manufacturer.

11) F_PANEL (Front Panel Header)

Connect the power switch, reset switch, speaker, chassis intrusion switch/sensor and system status indicator

on the chassis to this header according to the pin assignments below. Note the positive and negative pins

before connecting the cables.

System Status LED

S0 On

S3/S4/S5 Off

•PW (Power Switch):

Connects to the power switch on the chassis front panel. You may

congure the way to turn off your system using the power switch

(refer to Chapter 2, «BIOS Setup,» «SettingsPlatform Power,» for more

information).

•SPEAK (Speaker):

Connects to the speaker on the chassis front panel. The system reports

system startup status by issuing a beep code. One single short beep

will be heard if no problem is detected at system startup.

•PLED/PWR_LED (Power LED):

Connects to the power status indicator

on the chassis front panel. The LED is on

when the system is operating. The LED is

off when the system is in S3/S4 sleep state

or powered off (S5).

•HD (Hard Drive Activity LED):

Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive

is reading or writing data.

•RES (Reset Switch):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer

if the computer freezes and fails to perform a normal restart.

•CI (Chassis Intrusion Header):

Connects to the chassis intrusion switch/sensor on the chassis that can detect if the chassis cover has

been removed. This function requires a chassis with a chassis intrusion switch/sensor.

•NC: No connection.

12) F_AUDIO (Front Panel Audio Header)

The front panel audio header supports High Denition audio (HD). You may connect your chassis front

panel audio module to this header. Make sure the wire assignments of the module connector match the

pin assignments of the motherboard header. Incorrect connection between the module connector and the

motherboard header will make the device unable to work or even damage it.

9 1

10 2

Pin No. Denition Pin No. Denition

1 MIC2_L 6 Sense

2 GND 7 FAUDIO_JD

3 MIC2_R 8 No Pin

4 NC 9 LINE2_L

5 LINE2_R 10 Sense

NC

NC

Power LED

1

2

19

20

CI-

CI+

PWR_LED-

PWR_LED+

PLED-

PW-

SPEAK+

SPEAK-

PLED+

PW+

Power LED

HD-

RES+

HD+

RES-

Hard Drive

Activity LED

Reset

Switch Chassis Intrusion

Header

Power Switch Speaker

PWR_LED-

— 18 —

Pin No. Denition Pin No. Denition Pin No. Denition

1 VBUS 8 D1- 15 SSTX2-

2 SSRX1- 9 D1+ 16 GND

3 SSRX1+ 10 NC 17 SSRX2+

4 GND 11 D2+ 18 SSRX2-

5 SSTX1- 12 D2- 19 VBUS

6SSTX1+ 13 GND 20 No Pin

7 GND 14 SSTX2+

13) F_U32 (USB 3.2 Gen 1 Header)

The header conforms to USB 3.2 Gen 1 and USB 2.0 specication and each header can provide two USB

ports. For purchasing the optional 3.5″ front panel that provides two USB 3.2 Gen 1 ports, please contact

the local dealer.

1

14) F_USB1/F_USB2 (USB 2.0/1.1 Headers)

The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an

optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 Power (5V) 6 USB DY+

2 Power (5V) 7 GND

3 USB DX- 8 GND

4 USB DY— 9 No Pin

5 USB DX+ 10 NC

•Do not plug the IEEE 1394 bracket (2×5-pin) cable into the USB 2.0/1.1 header.

•Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord

from the power outlet to prevent damage to the USB bracket.

10

9

2

1

20

10

11

15) TPM (Trusted Platform Module Header)

You may connect a TPM (Trusted Platform Module) to this header.

Pin No. Denition Pin No. Denition

1LAD0 7LAD3

2VCC3 8GND

3LAD1 9LFRAME

4No Pin 10 NC

5LAD2 11 SERIRQ

6LCLK 12 LRESET

12

11

2

1

— 19 —

10

9

2

1

16) COM (Serial Port Header)

The COM header can provide one serial port via an optional COM port cable. For purchasing the optional

COM port cable, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 NDCD- 6 NDSR-

2 NSIN 7 NRTS-

3 NSOUT 8 NCTS-

4 NDTR- 9 NRI-

5 GND 10 No Pin

17) CLR_CMOS (Clear CMOS Jumper)

Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults. To clear

the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.

•Always turn off your computer before clearing the CMOS values.

•After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or

manually congure the BIOS settings (refer to Chapter 2, «BIOS Setup,» for BIOS congurations).

Open: Normal

Short: Clear CMOS Values

18) BAT (Battery)

The battery provides power to keep the values (such as BIOS congurations, date, and time information)

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1. Turn off your computer and unplug the power cord.

2. Gently remove the battery from the battery holder and wait for one minute. (Or use a metal

object like a screwdriver to touch the positive and negative terminals of the battery holder,

making them short for 5 seconds.)

3. Replace the battery.

4. Plug in the power cord and restart your computer.

•Always turn off your computer and unplug the power cord before replacing the battery.

•Replace the battery with an equivalent one. Damage to your devices may occur if the battery is

replaced with an incorrect model.

•Contact the place of purchase or local dealer if you are not able to replace the battery by yourself

or uncertain about the battery model.

•When installing the battery, note the orientation of the positive side (+) and the negative side (-)

of the battery (the positive side should face up).

•Used batteries must be handled in accordance with local environmental regulations.

— 20 —

BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the

motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,

saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows

the user to modify basic system conguration settings or to activate certain system features.

When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to

keep the conguration values in the CMOS.

To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on.

To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility.

•Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.

•@BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet

and updates the BIOS.

Chapter 2 BIOS Setup

•Because BIOS ashing is potentially risky, if you do not encounter problems using the current version of BIOS,

it is recommended that you not ash the BIOS. To ash the BIOS, do it with caution. Inadequate BIOS ashing

may result in system malfunction.

•It is recommended that you not alter the default settings (unless you need to) to prevent system instability or other

unexpected results. Inadequately altering the settings may result in system’s failure to boot. If this occurs, try to

clear the CMOS values and reset the board to default values. (Refer to the «Load Optimized Defaults» section in

this chapter or introductions of the battery/clear CMOS jumper in Chapter 1 for how to clear the CMOS values.)

2-1 Startup Screen

The following startup Logo screen will appear when the computer boots.

Function Keys

•When the system is not stable as usual, select the Load Optimized Defaults item to set your system to its defaults.

•The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.

There are two different BIOS modes as follows and you can use the <F2> key to switch between the two modes.

Easy Mode allows users to quickly view their current system information or to make adjustments for optimum

performance. In Easy Mode, you can use your mouse to move through conguration items. The Advanced Mode

provides detailed BIOS settings. You can press the arrow keys on your keyboard to move among the items

and press <Enter> to accept or enter a sub-menu. Or you can use your mouse to select the item you want.

— 21 —

2-2 The Main Menu

Advanced Mode Function Keys

<f><g> Move the selection bar to select a setup menu

<h><i>Move the selection bar to select an conguration item on a menu

<Enter>/Double Click Execute command or enter a menu

<+>/<Page Up> Increase the numeric value or make changes

<—>/<Page Down> Decrease the numeric value or make changes

<F1> Show descriptions of the function keys

<F2> Switch to Easy Mode

<F3> Save the current BIOS settings to a prole

<F4> Load the BIOS settings from a prole created before

<F5> Restore the previous BIOS settings for the current submenus

<F6> Display the Smart Fan 5 screen

<F7> Load the Optimized BIOS default settings for the current submenus

<F8> Access the Q-Flash utility

<F10> Save all the changes and exit the BIOS Setup program

<F11> Switch to the Favorites submenu

<F12> Capture the current screen as an image and save it to your USB drive

<Insert> Add or remove a favorite option

<Ctrl>+<S> Display information on the installed memory

<Esc> Main Menu: Exit the BIOS Setup program

Submenus: Exit current submenu

Hardware Infor—

mation

Conguration Items Current Settings

Setup Menus System Time

Quick Access Bar allows you to quickly move to

the General Help, Easy Mode, Smart Fan 5, or

Q-Flash screen.

Conguration

Items

— 22 —

2-3 Favorites (F11)

Set your frequently used options as your favorites and use the <F11> key to quickly switch to the page where

all of your favorite options are located. To add or remove a favorite option, go to its original page and press

<Insert> on the option. The option is marked with a star sign if set as a «favorite.»

— 23 —

2-4 Tweaker

Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall

system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory

and reduce the useful life of these components. This page is for advanced users only and we recommend you not to

alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings

may result in system’s failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)

(Note) This item is present only when you install a CPU that supports this feature.

&CPU Clock Control

Allows you to manually set the CPU base clock in 1 MHz increments. (Default: Auto)

Important: It is highly recommended that the CPU frequency be set in accordance with the CPU

specications.

&Spread Spectrum Control

Enables or disables CPU/PCIe Spread Spectrum. (Default: Auto)

&CPU Ratio Mode (Note)

Allows you to set the core ratio for all CPU cores or individual cores. (Default: All cores)

&CCD0 CCX0/1 Ratio (Note)

Allows you to manually set the core ratio for the CPU CCX0, 1 cores. This item is congurable only when

CPU Ratio Mode is set to Per CCX. (Default: Auto)

&CPU Clock Ratio

Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU

being installed.

&GFX Clock Frequency (Note)

Allows you to alter the frequency for the GPU. After you alter the GFX Clock Frequency settings, make

sure to adjust the GFX Core Voltage settings. (Default: Auto)

NOTE: The adjustable range is dependent on the CPU being installed. Auto lets the BIOS automatically

congure this setting.

&GFX Core Voltage (Note)

Allows you to alter the voltage for the GPU. (Default: Auto)

NOTE: The adjustable range is dependent on the CPU being installed. Auto lets the BIOS automatically

congure this setting.

Advanced CPU Settings

&Core Performance Boost (Note)

Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU

performance-boost technology. (Default: Auto)

— 24 —

&SVM Mode

Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems

and applications in independent partitions. With virtualization, one computer system can function as multiple

virtual systems. (Default: Disabled)

&AMD Cool&Quiet function

Enabled Lets the AMD Cool’n’Quiet driver dynamically adjust the CPU clock and VID to

reduce heat output from your computer and its power consumption. (Default)

Disabled Disables this function.

&PPC Adjustment (Note 1)

Allows you to x the PState of the CPU. (Default: PState 0)

&Global C-state Control (Note 1)

Allows you to determine whether to let the CPU enter C states. When enabled, the CPU core frequency

will be reduced during system halt state to decrease power consumption. (Default: Auto)

&Power Supply Idle Control (Note 1)

Enables or disables Package C6 State.

Typical Current Idle Disables this function.

Low Current Idle Enables this function.

Auto Lets the BIOS automatically congure this setting. (Default)

&CCD Control (Note 1)

Sets the number of CCDs to be used. (Default: Auto)

&Downcore Control

Allows you to select the number of CPU cores to enable (the number of CPU cores may vary by CPU).

(Default: Auto)

&SMT Mode

Allows you to enable or disable the CPU Simultaneous Multi-Threading technology. (Default: Auto)

&CPPC (Note 1)

Enables or disables the CPPC feature. (Default: Auto)

&CPPC Preferred Cores (Note 1)

Enables or disables the CPPC Preferred Cores feature. (Default: Auto)

&ExtremeMemoryProle(X.M.P.)(Note 2)

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when

enabled.

Disabled Disables this function. (Default)

Prole1 Uses Prole 1 settings.

Prole2 (Note 2) Uses Prole 2 settings.

&XMP High Frequency Support (Note 2)

Allows you to select the compatibility level for high-frequency memory. This item is congurable only when

ExtremeMemoryProle(X.M.P.) is set to Prole1 or Prole2. (Default: Auto)

&System Memory Multiplier

Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD

data. (Default: Auto)

(Note 1) This item is present only when you install a CPU that supports this feature.

(Note 2) This item is present only when you install a CPU and a memory module that support this feature.

— 25 —

Advanced Memory Settings

Memory Subtimings

d Standard Timing Control, Advanced Timing Control, CAD Bus Setup Timing, CAD Bus

DriveStrength,DataBusConguration

These sections provide memory timing settings. Note: Your system may become unstable or fail to boot

after you make changes on the memory timings. If this occurs, please reset the board to default values by

loading optimized defaults or clearing the CMOS values.

SPD Info

Displays information on the installed memory.

& CPU Vcore/Dynamic Vcore(DVID)/VCORE SOC/Dynamic VCORE SOC(DVID)/CPU

VDD18/CPU VDDP/A_VDD18S5/DRAM Voltage (CH A/B)/DDRVPP Voltage (CH A/B)/

DRAM Termination (CH A/B)

These items allow you to adjust the CPU Vcore and memory voltages.

CPU/VRM Settings

This submenu allows you to congure Load-Line Calibration level, over-voltage protection level, over-current

protection level, and PWM phases.

— 26 —

2-5 Settings

Platform Power

&AC BACK

Determines the state of the system after the return of power from an AC power loss.

Memory The system returns to its last known awake state upon the return of the AC power.

Always On The system is turned on upon the return of the AC power.

Always Off The system stays off upon the return of the AC power. (Default)

&ErP

Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)

Note: When this item is set to Enabled, the Resume by Alarm function becomes unavailable.

&Soft-Off by PWR-BTTN

Congures the way to turn off the computer in MS-DOS mode using the power button.

Instant-Off Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.

&Power Loading

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing

it to shutdown or fail. If this occurs, please set to Enabled. Auto lets the BIOS automatically congure this

setting. (Default: Auto)

&Resume by Alarm

Determines whether to power on the system at a desired time. (Default: Disabled)

If enabled, set the date and time as following:

Wake up day: Turn on the system at a specic time on each day or on a specic day in a month.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.

&Wake on LAN

Enables or disables the wake on LAN function. (Default: Enabled)

&High Precision Event Timer

Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)

&CEC 2019 Ready

Allows you to select whether to allow the system to adjust power consumption when it is in shutdown, idle,

or standby state in order to comply with the CEC (California Energy Commission) 2019 Standards. (Default:

Disabled)

— 27 —

IO Ports

&Initial Display Output

Species the rst initiation of the monitor display from the installed PCI Express graphics card or the onboard

graphics.

IGD Video (Note) Sets the onboard graphics as the rst display.

PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the rst display. (Default)

PCIe 2 Slot Sets the graphics card on the PCIEX4 slot as the rst display.

&Integrated Graphics (Note)

Enables or disables the onboard graphics function.

Auto The BIOS will automatically enable or disable the onboard graphics

depending on the graphics card being installed. (Default)

Forces Enables the onboard graphics.

Disabled Disables the onboard graphics.

&UMA Mode (Note)

Specify the UMA mode.

Auto Lets the BIOS automatically congure this setting. (Default)

UMA Specied Sets the UMA Frame Buffer Size.

UMA Auto Sets the display resolution.

UMA Game Optimized Adjusts the frame buffer size based on the total system memory size.

This item is congurable only when Integrated Graphics is set to Forces.

&UMA Frame Buffer Size (Note)

Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller.

MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 64M~2G.

This item is congurable only when UMA Mode is set to UMASpecied.

&Display Resolution (Note)

Allows you to set the display resolution. Options are: Auto (default), 1920×1080 and below, 2560×1600,

3840×2160. This item is congurable only when UMA Mode is set to UMA Auto.

&HD Audio Controller

Enables or disables the onboard audio function. (Default: Enabled)

If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to

Disabled.

&PCIEX16 Bifurcation

Allows you to determine how the bandwidth of the PCIEX16 slot is divided. Options: Auto, PCIE 2×8,

PCIE 1×8/2×4, PCIE 2×4/1×8, PCIE 4×4 (Note). (Default: Auto)

&Above 4G Decoding

Enables or disables 64-bit capable devices to be decoded in above 4 GB address space (only if your system

supports 64-bit PCI decoding). Set to Enabled if more than one advanced graphics card are installed and

their drivers are not able to be launched when entering the operating system (because of the limited 4 GB

memory address space). (Default: Disabled)

&Onboard LAN Controller

Enables or disables the onboard LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled.

(Note) This item is present only when you install a CPU that supports this feature.

— 28 —

USBConguration

&Legacy USB Support

Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)

&XHCI Hand-off

Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off

support. (Default: Enabled)

&USB Mass Storage Driver Support

Enables or disables support for USB storage devices. (Default: Enabled)

&Port 60/64 Emulation

Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support

for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.

(Default: Disabled)

&Mass Storage Devices

Displays a list of connected USB mass storage devices. This item appears only when a USB storage device

is installed.

NVMeConguration

Displays information on your M.2 NVME PCIe SSD if installed.

SuperIOConguration

&Serial Port

Enables or disables the onboard serial port. (Default: Enabled)

SATAConguration

&SATA Mode

Enables or disables RAID for the SATA controllers integrated in the Chipset or congures the SATA controllers

to AHCI mode.

RAID Enables RAID for the SATA controller.

AHCI Congures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specication that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

&NVMe RAID mode

Allows you to determine whether to use your M.2 NVMe PCIe SSDs to congure RAID. (Default: Disabled)

&Chipset SATA Port Enable

Enables or disables the integrated SATA controllers. (Default: Enabled)

&Chipset SATA Port 0/1/2/3

Displays the information of the connected SATA device(s).

NetworkStackConguration

&Network Stack

Disables or enables booting from the network to install a GPT format OS, such as installing the OS from

the Windows Deployment Services server. (Default: Disabled)

&IPv4 PXE Support

Enables or disables IPv4 PXE Support. This item is congurable only when Network Stack is enabled.

&IPv4 HTTP Support

Enables or disables HTTP boot support for IPv4. This item is congurable only when Network Stack is

enabled.

&IPv6 PXE Support

Enables or disables IPv6 PXE Support. This item is congurable only when Network Stack is enabled.

— 29 —

&IPv6 HTTP Support

Enables or disables HTTP boot support for IPv6. This item is congurable only when Network Stack is

enabled.

&PXE boot wait time

Allows you to congure how long to wait before you can press <Esc> to abort the PXE boot. This item is

congurable only when Network Stack is enabled. (Default: 0)

&Media detect count

Allows you to set the number of times to check the presence of media. This item is congurable only when

Network Stack is enabled. (Default: 1)

Realtek PCIe Family Controller

This sub-menu provides information on LAN conguration and related conguration options.

Miscellaneous

&LEDs in System Power On State

Allows you to enable or disable motherboard LED lighting when the system is on.

Off Disables the selected lighting mode when the system is on.

On Enables the selected lighting mode when the system is on. (Default)

&LEDs in Sleep, Hibernation, and Soft Off States

Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.

This item is congurable when LEDs in System Power On State is set to On.

Off Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)

On Enables the selected lighting mode when the system enters S3/S4/S5 state.

&PCIeSlotConguration

Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, Gen 3, or Gen 4 (Note). Actual

operation mode is subject to the hardware specication of each slot. Auto lets the BIOS automatically

congure this setting. (Default: Auto)

&3DMark01 Enhancement

Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)

&IOMMU

Enables or disables AMD IOMMU support. (Default: Auto)

&AMD CPU fTPM

Enables or disables the TPM 2.0 function integrated in the AMD CPU. (Default: Disabled)

Trusted Computing

Enables or disables Trusted Platform Module (TPM).

AMD CBS

This sub-menu provides AMD CBS-related conguration options.

PC Health

&Reset Case Open Status

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the Case Open eld will

show «No» at next boot.

(Note) This item is present only when you install a CPU that supports this feature.

— 30 —

&Case Open

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header. If the system chassis cover is removed, this eld will show «Yes», otherwise it will show «No». To

clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to

the CMOS, and then restart your system.

& CPU Vcore/CPU VDDP/DRAM Channel A/B Voltage/+3.3V/+5V/CHIPSET Core/+12V/

VCORE SOC

Displays the current system voltages.

Smart Fan 5

&Monitor

Allows you to select a target to monitor and to make further adjustment. (Default: CPU FAN)

&Fan Speed Control

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal Allows the fan to run at different speeds according to the temperature. You can adjust

the fan speed with System Information Viewer based on your system requirements.

(Default)

Silent Allows the fan to run at slow speeds.

Manual Allows you to control the fan speed in the curve graph.

Full Speed Allows the fan to run at full speeds.

&Fan Control Use Temperature Input

Allows you to select the reference temperature for fan speed control.

&Temperature Interval

Allows you to select the temperature interval for fan speed change.

&Fan Control mode

Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control

mode. (Default)

Voltage Voltage mode is recommended for a 3-pin fan.

PWM PWM mode is recommended for a 4-pin fan.

&Fan Stop

Enables or disables the fan stop function. You can set the temperature limit using the temperature curve.

The fan stops operation when the temperature is lower than the limit. (Default: Disabled)

&Temperature

Displays the current temperature of the selected target area.

&Fan Speed

Displays current fan speeds.

&Flow Rate

Displays the ow rate of your water cooling system.

&Temperature Warning Control

Sets the warning threshold for temperature. When temperature exceeds the threshold, BIOS will emit

warning sound. Options are: Disabled (default), 60oC/140oF, 70oC/158oF, 80oC/176oF, 90oC/194oF.

&Fan Fail Warning

Allows the system to emit warning sound if the fan is not connected or fails. Check the fan condition or fan

connection when this occurs. (Default: Disabled)

— 31 —

2-6 System Info.

This section provides information on your motherboard model and BIOS version. You can also select the default

language used by the BIOS and manually set the system time.

&System Language

Selects the default language used by the BIOS.

&System Date

Sets the system date. The date format is week (read-only), month, date, and year. Use <Enter> to switch

between the Month, Date, and Year elds and use the <Page Up> or <Page Down> key to set the desired

value.

&System Time

Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:00:00. Use

<Enter> to switch between the Hour, Minute, and Second elds and use the <Page Up> or <Page Down>

key to set the desired value.

&Access Level

Displays the current access level depending on the type of password protection used. (If no password is

set, the default will display as Administrator.) The Administrator level allows you to make changes to all

BIOS settings; the User level only allows you to make changes to certain BIOS settings but not all.

Plug in Devices Info

Displays information on your SATA, PCI Express, and M.2 devices if installed.

Q-Flash

Allows you to access the Q-Flash utility to update the BIOS or back up the current BIOS conguration.

— 32 —

2-7 Boot

&Boot Option Priorities

Species the overall boot order from the available devices. Removable storage devices that support GPT

format will be prexed with «UEFI:» string on the boot device list. To boot from an operating system that

supports GPT partitioning, select the device prexed with «UEFI:» string.

Or if you want to install an operating system that supports GPT partitioning such as Windows 10 64-bit,

select the optical drive that contains the Windows 10 64-bit installation disc and is prexed with «UEFI:»

string.

&Bootup NumLock State

Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default: On)

&Security Option

Species whether a password is required every time the system boots, or only when you enter BIOS Setup.

After conguring this item, set the password(s) under the Administrator Password/User Password item.

Setup A password is only required for entering the BIOS Setup program.

System A password is required for booting the system and for entering the BIOS Setup program.

(Default)

&Full Screen LOGO Show

Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the

GIGABYTE Logo when the system starts up. (Default: Enabled)

&Fast Boot

Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup

speed. (Default: Disabled)

&SATA Support

Last Boot SATA Devices Only Except for the previous boot drive, all SATA devices are disabled

before the OS boot process completes. (Default)

All SATA Devices All SATA devices are functional in the operating system and during the POST.

This item is congurable only when Fast Boot is set to Enabled or Ultra Fast.

&NVMe Support

Allows you to enable or disable NVMe device(s). (Default: Enabled)

This item is congurable only when Fast Boot is set to Enabled or Ultra Fast.

— 33 —

&VGA Support

Allows you to select which type of operating system to boot.

Auto Enables legacy option ROM only.

EFI Driver Enables EFI option ROM. (Default)

This item is congurable only when Fast Boot is set to Enabled or Ultra Fast.

&USB Support

Disabled All USB devices are disabled before the OS boot process completes.

Full Initial All USB devices are functional in the operating system and during the POST.

(Default)

Partial Initial Part of the USB devices are disabled before the OS boot process completes.

This item is congurable only when Fast Boot is set to Enabled. This function is disabled when Fast Boot

is set to Ultra Fast.

&NetWork Stack Driver Support

Disabled Disables booting from the network. (Default)

Enabled Enables booting from the network.

This item is congurable only when Fast Boot is set to Enabled or Ultra Fast.

&CSM Support

Enables or disables UEFI CSM (Compatibility Support Module) to support a legacy PC boot process.

Disabled Disables UEFI CSM and supports UEFI BIOS boot process only.

Enabled Enables UEFI CSM. (Default)

&LAN PXE Boot Option ROM

Allows you to select whether to enable the legacy option ROM for the LAN controller. (Default: Disabled)

This item is congurable only when CSM Support is set to Enabled.

&Storage Boot Option Control

Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.

Disabled Disables option ROM.

UEFI Only Enables UEFI option ROM only. (Default)

Legacy Only Enables legacy option ROM only.

This item is congurable only when CSM Support is set to Enabled.

&Other PCI Device ROM Priority

Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other

than the LAN, storage device, and graphics controllers.

Disabled Disables option ROM.

UEFI Only Enables UEFI option ROM only. (Default)

Legacy Only Enables legacy option ROM only.

This item is congurable only when CSM Support is set to Enabled.

&Administrator Password

Allows you to congure an administrator password. Press <Enter> on this item, type the password, and

then press <Enter>. You will be requested to conrm the password. Type the password again and press

<Enter>. You must enter the administrator password (or user password) at system startup and when entering

BIOS Setup. Differing from the user password, the administrator password allows you to make changes to

all BIOS settings.

— 34 —

&User Password

Allows you to congure a user password. Press <Enter> on this item, type the password, and then press

<Enter>. You will be requested to conrm the password. Type the password again and press <Enter>.

You must enter the administrator password (or user password) at system startup and when entering BIOS

Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.

To cancel the password, press <Enter> on the password item and when requested for the password, enter

the correct one rst. When prompted for a new password, press <Enter> without entering any password.

Press <Enter> again when prompted to conrm.

NOTE: Before setting the User Password, be sure to set the Administrator Password rst.

Secure Boot

Allows you to enable or disable Secure Boot and congure related settings. This item is congurable only

when CSM Support is set to Disabled.

&Preferred Operating Mode

Allows you to select whether to enter Easy mode or Advanced mode after entering BIOS Setup. Auto

enters the BIOS mode where it was last time. (Default: Auto)

— 35 —

2-8 Save & Exit

&Save & Exit Setup

Press <Enter> on this item and select Yes. This saves the changes to the CMOS and exits the BIOS Setup

program. Select No or press <Esc> to return to the BIOS Setup Main Menu.

&Exit Without Saving

Press <Enter> on this item and select Yes. This exits the BIOS Setup without saving the changes made

in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu.

&Load Optimized Defaults

Press <Enter> on this item and select Yes to load the optimal BIOS default settings. The BIOS defaults

settings help the system to operate in optimum state. Always load the Optimized defaults after updating

the BIOS or after clearing the CMOS values.

&Boot Override

Allows you to select a device to boot immediately. Press <Enter> on the device you select and select Yes

to conrm. Your system will restart automatically and boot from that device.

&SaveProles

This function allows you to save the current BIOS settings to a prole. You can create up to 8 proles and

save as Setup Prole 1~ Setup Prole 8. Press <Enter> to complete. Or you can select Select File in

HDD/FDD/USB to save the prole to your storage device.

&LoadProles

If your system becomes unstable and you have loaded the BIOS default settings, you can use this function

to load the BIOS settings from a prole created before, without the hassles of reconguring the BIOS

settings. First select the prole you wish to load and then press <Enter> to complete. You can select Select

File in HDD/FDD/USB to input the prole previously created from your storage device or load the prole

automatically created by the BIOS, such as reverting the BIOS settings to the last settings that worked

properly (last known good record).

— 36 —

Chapter 3 Appendix

(Note) An M.2 PCIe SSD cannot be used to set up a RAID set either with an M.2 SATA SSD or a SATA hard

drive.

3-1 ConguringaRAIDSet

RAID Levels

RAID 0 RAID 1 RAID 10

Minimum Number of

Hard Drives ≥2 2 4

Array Capacity Number of hard drives *

Size of the smallest drive

Size of the smallest drive (Number of hard drives/2) *

Size of the smallest drive

Fault Tolerance No Yes Yes

C.UEFIRAIDConguration

Steps:

1. In BIOS Setup, go to Boot and set CSM Support to Disabled. Save the changes and exit BIOS Setup.

2. After the system reboot, enter BIOS Setup again. Then enter the SettingsIO PortsRAIDXpert2

CongurationUtility sub-menu.

3. On the RAIDXpert2CongurationUtility screen, press <Enter> on Array Management to enter the Create

Array screen. Then, select a RAID level. RAID levels supported include RAID 0, RAID 1, and RAID 10 (the

selections available depend on the number of the hard drives being installed). Next, press <Enter> on Select

Physical Disks to enter the Select Physical Disks screen.

4. On the Select Physical Disks screen, select the hard drives to be included in the RAID array and set them

to Enabled. Next, use the down arrow key to move to Apply Changes and press <Enter>. Then return

to the previous screen and set the Select CacheTagSize, Read Cache Policy and Write Cache Policy.

5. Move to Create Array and press <Enter> to begin.

6. After completing, you’ll be brought back to the Array Management screen. Under Manage Array Properties

you can see the new RAID volume and information on RAID level, array name, array capacity, etc.

Before you begin, please prepare the following items:

•At least two SATA hard drives or SSDs. (Note) (To ensure optimal performance, it is recommended that you use

two hard drives with identical model and capacity).

•Windows setup disc.

•Motherboard driver disc.

•A USB thumb drive.

ConguringtheOnboardSATAController

A. Installing SATA hard drive(s) in your computer

Install the hard drives/SSDs in the SATA/M.2 connectors on the motherboard. Then connect the power connectors

from your power supply to the hard drives.

B.ConguringSATAcontrollermodeinBIOSSetup

Make sure to congure the SATA controller mode correctly in system BIOS Setup.

Steps:

Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Under

SettingsIO Ports, set SATACongurationSATAMode to RAID. Then save the settings and restart your

computer. (If you want to use NVMe PCIe SSDs to congure RAID, make sure to set NVMe RAID mode to

Enabled.)

The BIOS Setup menus described in this section may differ from the exact settings for your

motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard

you have and the BIOS version.

— 37 —

Please visit GIGABYTE’s website for details on conguring a RAID array.

Install the RAID driver and operating system

With the correct BIOS settings, you are ready to install the operating system.

Installing the Operating System

As some operating systems already include RAID driver, you do not need to install separate RAID driver during

the Windows installation process. After the operating system is installed, we recommend that you install all

required drivers from the motherboard driver disc using «Xpress Install» to ensure system performance and

compatibility. If the operating system to be installed requires that you provide additional RAID driver during the

OS installation process, please refer to the steps below:

1. Copy the Hw10 folder under the BootDrv folder in the driver disc to your USB thumb drive.

2. Boot from the Windows setup disc and perform standard OS installation steps. When the screen requesting

you to load the driver appears, select Browse.

3. Insert the USB thumb drive and then browse to the location of the driver. The location of the drivers is as

follows:

Hw10RAIDx64

4. Select AMD-RAID Bottom Device rst and click Next to load the driver. Then select AMD-RAID Controller

and click Next to load the driver. Finally, continue the OS installation.

— 38 —

•Before installing the drivers, rst install the operating system.

•After installing the operating system, insert the motherboard driver disc into your optical drive. Click

on the message «Tap to choose what happens with this disc» on the top-right corner of the screen

and select «Run Run.exe.» (Or go to My Computer, double-click the optical drive and execute the

Run.exe program.)

«Xpress Install» will automatically scan your system and then list all of the drivers that are recommended to

install. You can click the Xpress Install button and «Xpress Install» will install all of the selected drivers. Or click

the arrow icon to individually install the drivers you need.

3-2 Drivers Installation

Please visit GIGABYTE’s website for more software information.

Please visit GIGABYTE’s website for more troubleshooting information.

— 39 —

Regulatory Notices

United States of America, Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications. This class

B digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d’Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-

003 du Canada.

European Union (EU) CE Declaration of Conformity

This device complies with the following directives: Electromagnetic

Compatibility Directive 2014/30/EU, Low-voltage Directive 2014/35/

EU, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement.

This product has been tested and found to comply with all essential

requirements of the Directives.

European Union (EU) RoHS (recast) Directive 2011/65/EU & the

European Commission Delegated Directive (EU) 2015/863 Statement

GIGABYTE products have not intended to add and safe from hazardous

substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP, BBP, DBP and DIBP).

The parts and components have been carefully selected to meet RoHS

requirement. Moreover, we at GIGABYTE are continuing our efforts to

develop products that do not use internationally banned toxic chemicals.

European Union (EU) Community Waste Electrical & Electronic

Equipment (WEEE) Directive Statement

GIGABYTE will fulll the national laws as interpreted from the 2012/19/

EU WEEE (Waste Electrical and Electronic Equipment) (recast) directive.

The WEEE Directive species the treatment, collection, recycling and

disposal of electric and electronic devices and their components. Under

the Directive, used equipment must be marked, collected separately, and

disposed of properly.

WEEE Symbol Statement

The symbol shown below is on the product or on its

packaging, which indicates that this product must not be

disposed of with other waste. Instead, the device should be

taken to the waste collection centers for activation of the

treatment, collection, recycling and disposal procedure.

For more information about where you can drop off your waste equipment

for recycling, please contact your local government ofce, your household

waste disposal service or where you purchased the product for details of

environmentally safe recycling.

End of Life Directives-Recycling

The symbol shown below is on the product or on its packaging,

which indicates that this product must not be disposed of with

other waste. Instead, the device should be taken to the waste

collection centers for activation of the treatment, collection,

recycling and disposal procedure.

Déclaration de Conformité aux Directives de l’Union européenne (UE)

Cet appareil portant la marque CE est conforme aux directives de l’UE

suivantes: directive Compatibilité Electromagnétique 2014/30/UE, directive

Basse Tension 2014/35/UE et directive RoHS II 2011/65/UE. La conformité

à ces directives est évaluée sur la base des normes européennes

harmonisées applicables.

European Union (EU) CE-Konformitätserklärung

Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien:

EMV-Richtlinie 2014/30/EU, Niederspannungsrichtlinie 2014/30/EU und

RoHS-Richtlinie 2011/65/EU erfüllt. Die Konformität mit diesen Richtlinien

wird unter Verwendung der entsprechenden Standards zurEuropäischen

Normierung beurteilt.

CE declaração de conformidade

Este produto com a marcação CE estão em conformidade com das

seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/EU; Diretiva CEM

2014/30/EU; Diretiva RSP 2011/65/UE. A conformidade com estas diretivas

é vericada utilizando as normas europeias harmonizadas.

CE Declaración de conformidad

Este producto que llevan la marca CE cumplen con las siguientes

Directivas de la Unión Europea: Directiva EMC (2014/30/EU), Directiva

de bajo voltaje (2014/35/EU), Directiva RoHS (recast) (2011/65/EU).

El cumplimiento de estas directivas se evalúa mediante las normas

europeas armonizadas.

Dichiarazione di conformità CE

Questo prodotto è conforme alle seguenti direttive: Direttiva sulla

compatibilità elettromagnetica 2014/30/UE, Direttiva sulla bassa tensione

2014/35/UE, Direttiva RoHS (rifusione) 2011/65/UE. Questo prodotto è

stato testato e trovato conforme a tutti i requisiti essenziali delle Direttive.

Supplier’s Declaration of Conformity

47 CFR § 2.1077 Compliance Information

Product Name: Motherboard

Trade Name: GIGABYTE

Model Number: B550M AORUS PRO-P

Responsible Party – U.S. Contact Information: G.B.T. Inc.

Address: 17358 Railroad street, City Of Industry, CA91748

Tel.: 1-626-854-9338

Internet contact information: https://www.gigabyte.com

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

— 40 —

— 41 —

— 42 —

— 43 —

Contact Us

GIGA-BYTE TECHNOLOGY CO., LTD.

Address: No.6, Baoqiang Rd., Xindian Dist., New Taipei City 231, Taiwan

TEL: +886-2-8912-4000, FAX: +886-2-8912-4005

Tech. and Non-Tech. Support (Sales/Marketing) : https://esupport.gigabyte.com

WEB address (English): https://www.gigabyte.com

WEB address (Chinese): https://www.gigabyte.com/tw

•GIGABYTE eSupport

To submit a technical or non-technical (Sales/Marketing) question, please link to:

https://esupport.gigabyte.com

— 44 —