Музыкальный центр панасоник sa pm19 инструкция

Раздел: Бытовая, кухонная техника, электроника и оборудование

Тип: Музыкальный Центр

Инструкция к Музыкальному Центру Panasonic SC-PM19

For U.S.A.

As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY

STAR® guidelines for energy efficiency.

Before connecting, operating or adjusting this product, please read these instructions completely.

Please keep this manual for future reference.

SC-PM193 is available in the U.S.A only

P PC

CD Stereo System

Operating Instructions

Model No. SC-PM19

SC-PM193

RQT7364-P

Dear customer

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

These operating instructions are applicable to the following system.

Inside of product

2

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

Supplied accessories

Please check and identify the supplied accessories.

Use numbers indicated in parentheses when asking for replacement parts.

In U.S.A. to order accessories, refer to “Accessory Purchases” on page 27.

A

R6, AA, UM-3

AThe remote control

■Batteries

•Insert so the poles (+ and –) match those in the remote control.

•Do not use rechargeable type batteries.

Do not:

•mix old and new batteries.

•use different types at the same time.

•heat or expose to flame.

•take apart or short circuit.

•attempt to recharge alkaline or manganese batteries.

•use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.

Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

■Use

Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit. Refer to page 7 for the remote control sensor position.

•Keep your speakers at least 10 mm (13/32˝) away from the system for proper ventilation.

•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.

•To avoid damage to the speakers, do not touch the speaker cones if you have taken the nets off.

CConnections

•Plug the AC power supply cord into a household AC outlet only after all other connections have been made.

•To prepare the AM loop antenna wire and speaker cords, twist the vinyl cover tip and pull off.

1 Connect the FM indoor antenna.

Tape the antenna to a wall or column, in a position where radio signals are received with the least amount of interference.

Note

For the best reception:

An FM outdoor antenna is recommended. (\ page 6)

5

(Continued on next page) RQT7364

6

RQT7364

Connections

2 Connect the AM loop antenna.

Stand the antenna up on its base. Keep loose antenna cord away from other wires and cords.

3 Connect the speaker cords.

a Confirm the colors of the tags on the ends of the cords.

bFor White tags:

Connect cords to gray terminals. For Blue, Black and Red tags:

Connect cords so tag colors match the terminal colors.

Cords with white and blue tags are for high frequency. Cords with red and black tags are for low frequency.

Incorrect connection can damage the unit.

Caution

Use only the supplied speakers.

The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected.

Caution

•Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/ or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.

•Do not attach these speakers to walls or ceilings.

4 Connect the AC power supply cord.

Note

The included AC power supply cord is for use with this unit only. Do not use it with other equipment.

Optional antenna connections

You may need an outdoor antenna if you use this system in a mountainous region or inside a reinforced-concrete building, etc.

A FM outdoor antenna

Disconnect the FM indoor antenna if an FM outdoor antenna is installed.

Note

An outdoor antenna should be installed by a qualified technician only.

B AM outdoor antenna

Connect the outdoor antenna without removing the AM loop antenna. Run 5 to 12 m of vinyl-covered wire horizontally along a window or other convenient location.

Note

When the unit is not in use, disconnect the outdoor antenna to prevent possible damage that may be caused by lightning. Never use an outdoor antenna during a lightning storm.

External unit connections

•Make sure that the power supply for all components has been turned off before making any connections.

•For details, refer to the operating instructions of the unit which is to be connected.

•All peripheral components and cables sold separately.

C Connecting analog equipment

This example shows how to connect an analog player with a PHONO OUT/LINE OUT switch.

When units other than those described are to be connected, please consult your audio dealer.

Note

•Only an analog player with a built-in phono equalizer can be connected.

•Set the switch to the “LINE OUT” position at the back of the analog player.

A

STOP,

DEMO

8

RQT7364

A Demo function

When the unit is first plugged in, a demonstration of its functions may be shown on the display.

If the demo setting is off, you can show a demonstration by selecting “DEMO ON”.

Press and hold [STOP 7, –DEMO].

The display changes each time the button is held down.

While in the standby mode, select “DEMO OFF” to reduce power consumption.

B Setting the time

This is a 12-hour clock.

1 Press [y] to turn the unit on.

2 Press [SHIFT] + [CLOCK/TIMER] to display “CLOCK”.

Every time you press the button:

CLOCK PLAY REC Original display

3 Within 5 seconds

Press and hold [4/REW/4] or [3/FF/¢] to set the time.

4 Press [SHIFT] + [CLOCK/TIMER].

Displaying the clock:

Press [SHIFT] + [CLOCK/TIMER].

The clock is shown for about 5 seconds.

Note

The clock may lose or gain some time over a period. Readjust if necessary.

C Convenient functions

To dim the display panel

Press [DIMMER].

The display brightness will be reduced except for [AC IN] indicator.

To cancel, press [DIMMER] again.

To mute the volume

Press [MUTING].

To cancel, press [MUTING] again.

Muting can also be cancelled by lowering the volume all the way to “—dB”.

When the system is turned off, the muting operation will be automatically cancelled.

The radio: manual tuning

1 Press [TUNER/BAND] to select:

FM AM

2 Press [PLAY MODE] to select “MANUAL”.

PRESET MANUAL

3 Press [4/REW/4] or [3/FF/¢] to select the frequency of the required station.

“ST” is displayed when a stereo FM broadcast is being received.

4 Adjust the volume.

Auto tuning

Press and hold [4/REW/4] or [3/FF/¢] for a moment. The unit begins auto tuning when the frequency starts changing rapidly and stopping when it finds a station.

•To cancel, press [4/REW/4] or [3/FF/¢] again.

•Excessive interference may interrupt auto tuning.

A To improve FM sound quality

Press and hold [PLAY MODE] to display “MONO”.

To cancel, press and hold [PLAY MODE] again. MONO is also cancelled if the frequency is changed. For normal listening, turn off “MONO”.

B FM allocation setting

By main unit only

This system allows you to receive FM broadcasts allocated in 0.1 MHz steps.

To change the step to 0.1 MHz

1Press and hold [TUNER/BAND].

After a while the display flashes with the current minimum frequency.

9

RQT7364