Пылесос тефаль компакт пауэр ххл инструкция

The overheating protection breaker of your vacuum cleaner has been activated. You should clean the motor filter, change the microactive filter (according to model) and replace the dust bag or empty the dust collector. Then wait 30 minutes before starting your appliance again.

Pull it out completely and press on the cord rewind switch. If the issue is still present contact an authorised service partner.

It could be due to several causes:
• The crosshead regulator is on open position, close it.
• Vacuum flow is blocked: Check the tube, the nozzle and the hose.
• The container or bag is full, change it or clean it (depending on model).
• The filtration system is clogged up, clean or replace it.

If the issue is still present contact an authorised service partner.

After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

The electro-suction brush is a motorised rotary brush, which gives you high efficiency in cleaning for removing thread, hair and pet hair etc embedded in carpets.

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

Find more detailed information in the Guarantee section of this website.

If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.