- Manuals
- Brands
- BOON EDAM Manuals
ManualsLib has more than 15 BOON EDAM manuals
Control Panel
Models
Document Type
Duotour DTAC
Instruction Card
Tournex
Instruction Card
Door
Models
Document Type
THT-100
Operation, Installation, And Maintenance Manual
Security System
Models
Document Type
Winglock 900
Safety And Operating Instructions, Maintenance
Turnstiles
Models
Document Type
Circleslide
Instruction Card
Speedlane 900
Operation Installation And Maintenance
Tourlock 120/22
Safety And User Instructions
Transpalock 900
Instruction Card
Trilock 50
Instruction Card
Turnlock 100
Safety And Operation Instructions
Show all BOON EDAM Turnstiles manuals
Данная модель доступна в трёхстворчатом и четырёхстворчатом исполнении. Архитекторам нравится револьверная дверь Tourniket, так как различные варианты её цветового исполнения и отделки позволяют создавать поистине уникальный дизайн входной группы. Револьверная дверь Tourniket может поставляться с жёсткими или складывающимися створками.
Заказать расчет
Техническая информация
Скачать документацию
Прайс
Техническая информация
|
Диаметр (мм) |
1600 – 3800 |
|
Высота прохода (мм) |
2100 – 3600 |
|
Пропускная способность |
2х22 – 2х46 |
|
Количество створок |
3/4 |
|
Доступно для людей с ограниченными способностями |
да |
|
Аварийный выход* |
да |
|
Открывание / блокировка при обесточивании |
да / да |
|
Складывающиеся / жесткие дверные створки |
да |
|
Отделка поверхности |
нержавеющая сталь |
Показать еще
* — Только для складных створок. Требования к путям эвакуации зависит от местных норм.
Скачать документацию
Прайс
 |
[Page 1] BOON EDAM THT-100 THT-100 Full Height Turnstile Operation, Installation and Maintenance Manual |
 |
[Page 2] BOON EDAM THT-100 1 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 TABLE OF CONTENTS GENERAL INFORMATION ………………………………………………………………………………………. |
 |
[Page 3] BOON EDAM THT-100 THT-100 2 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 9.1 CONTROL BOX AND MAIN CONTROL BOARD ……………………………………………….. |
 |
[Page 4] BOON EDAM THT-100 3 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 GENERAL INFORMATION 1 Introduction This manual is written for the service and installation engineer, it provides information about:… |
 |
[Page 5] BOON EDAM THT-100 THT-100 4 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 1.4 Product options The options of the product are marked with an asterisk (*) in the text o… |
 |
[Page 6] BOON EDAM THT-100 5 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 WARNING! It is not allowed to make changes or switch off any safety features without authorization from Boon Edam…. |
 |
[Page 7] BOON EDAM THT-100 THT-100 6 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 3 Product description 3.1 General The THT-100 Full Height Turnstile is available in… |
 |
[Page 8] BOON EDAM THT-100 7 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 3.2 Shield Options The THT 100 can be configured in a variety of Shield Assembly options. The following shield options are common… |
 |
[Page 9] BOON EDAM THT-100 THT-100 8 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 3.3 Barrier Assembly Options The THT 100 can be configured with a variety of Barrier Assemb… |
 |
[Page 10] BOON EDAM THT-100 9 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 3.5 Rotor Arm Options The THT 100 can be configured with a variety of Rotor Arm assembly options. The following Rotors are commonly… |
 |
[Page 11] BOON EDAM THT-100 THT-100 10 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 3.6 Rotor Infill Covers (Option) Optional infill cover pieces can be ordered which cover th… |
 |
[Page 12] BOON EDAM THT-100 11 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 Figure 3-9. Two Piece Cover (Option) Figure 3-10. Round Canopy Cover (EL Option) Not pictured top channel cover options…. |
 |
[Page 13] BOON EDAM THT-100 THT-100 12 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 3.8 Control System The THT-100 Control Box is located in the upper Top Channel Assembly. … |
 |
[Page 14] BOON EDAM THT-100 13 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 3.9 Speed Control unit There are three possible options for speed control system of the THT100. Refer to the model supplied and ver… |
 |
[Page 15] BOON EDAM THT-100 THT-100 14 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 4 Operating concept 4.1 Operating functions There are many available operating funct… |
 |
[Page 16] BOON EDAM THT-100 15 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 Figure 4-1: THT-100 Plan View Examples Layout and Rotation Directions 4.2 Access control system (AC… |
 |
[Page 17] BOON EDAM THT-100 THT-100 16 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA Figure 4-2: THT-100 in typical Rest Position. 4.4 Optional and Configuration Features… |
 |
[Page 18] BOON EDAM THT-100 17 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 Card Reader Mounting Box* Optional Card reader mounting boxes can be provided which mount to the outer vertical post. The size o… |
 |
[Page 19] BOON EDAM THT-100 THT-100 18 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA Heel guards* The bottom rotor arms of the THT-100 can be fitted with an optional … |
 |
[Page 20] BOON EDAM THT-100 19 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 INSTALLATION 5 Installation procedure Always verify meet with the owner/owner’s representative to verify the exact location and ch… |
 |
[Page 21] BOON EDAM THT-100 THT-100 20 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 5.2 Tool and Manpower List Typical THT-100 installations require two men for standing and l… |
 |
[Page 22] BOON EDAM THT-100 21 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 5.5 Anchor Locations The THT-100 unit is secured to the floor at several locations (Note: the Non-secure and Secure side of the … |
 |
[Page 23] BOON EDAM THT-100 THT-100 22 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 5.6 Floor layout Typical Layout* Each THT-100 product will be delivered with a two … |
 |
[Page 24] BOON EDAM THT-100 23 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 5.7 Mechanical Assembly Base Plate Center the Base Plate over the Center Point Mark as shown in Figure 4.3. Mark through the B… |
 |
[Page 25] BOON EDAM THT-100 THT-100 24 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA Bottom Bearing and Flange Housing Place the bottom bearing on top of the anchored base pla… |
 |
[Page 26] BOON EDAM THT-100 25 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 Top Rotor Assembly Place the upper flange blocks inside of the top of all three rotor arm posts and tighten down using M10 bolts … |
 |
[Page 27] BOON EDAM THT-100 THT-100 26 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA ASTG CSTG and EL Rotor Arm Assembly (Option) The rotor arms of the ASTG, CSTG, and … |
 |
[Page 28] BOON EDAM THT-100 27 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 Top Channel Direction Alignment When setting the top channel on top of the ceiling plate, shield, and barrier post, it is necessary … |
 |
[Page 29] BOON EDAM THT-100 THT-100 28 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA Ceiling Plate and Top Channel Connection The ceiling plate mounts to the top of the shield a… |
 |
[Page 30] BOON EDAM THT-100 29 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 Top Channel Cover The standard cover fits over the top channel and mechanism. It is connected by six M5 bolts and flat washers. … |
 |
[Page 31] BOON EDAM THT-100 THT-100 30 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 5.8 Electrical installation The requirements for the mains power supply are: • Power su… |
 |
[Page 32] BOON EDAM THT-100 31 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 5.9 Main Control Box Cable Connections There are many cables which connect to the Main Control Box. The following cable plugs are … |
 |
[Page 33] BOON EDAM THT-100 THT-100 32 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA Electrical Fusing For 110/220 VAC single phase Mains Power, a 2.5 Amp fuse is located insid… |
 |
[Page 34] BOON EDAM THT-100 33 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 Access Control Integration The Access Control System (ACS) connections are terminated to the X1 and X2 terminal strips located insid… |
 |
[Page 35] BOON EDAM THT-100 THT-100 34 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 5.10 Configuration A series of jumpers are pre-configured on the main control boa… |
 |
[Page 36] BOON EDAM THT-100 35 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 WARNING! Persons should remain clear of the THT-100 top channel mechanism’s moving parts. 5.11 General The THT-100 wil… |
 |
[Page 37] BOON EDAM THT-100 THT-100 36 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 6 Parts Overview 6.1 THT100- Exploded View … |
 |
[Page 38] BOON EDAM THT-100 37 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 SAFETY INSPECTIONS AND MAINTENANCE 7 Safety Inspections All security entrance equipment requires a simple daily safety inspection t… |
 |
[Page 39] BOON EDAM THT-100 THT-100 38 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA Electrical • Check the safety functions of unit (speed control, heel guards etc., if eq… |
 |
[Page 40] BOON EDAM THT-100 39 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 8.3 Maintenance checklist Maintenance Checklist: THT-100 ( ) Project no.: . . . . . . . . . . . . . . . …. |
 |
[Page 41] BOON EDAM THT-100 THT-100 40 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA TROUBLESHOOTING 9 Troubleshooting WARNING! Switch off the power supply to the prod… |
 |
[Page 42] BOON EDAM THT-100 41 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 TECHNICAL SPECIFICATIONS 10 Technical specifications 10.1 Control Main Control Board: 24VDC, 1.25 Amp max draw. Main Transf… |
 |
[Page 43] BOON EDAM THT-100 THT-100 42 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA APPENDICES 11 Appendices 11.1 Spare Part list Part Number Description Comment … |
 |
[Page 44] BOON EDAM THT-100 43 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 11.2 Electrical Schematics Table 11.1: Electrical Schematic |
 |
[Page 45] BOON EDAM THT-100 THT-100 44 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA 11.3 THT100- Tandem Unit The THT-100 is available in a Tandem Unit which incorpora… |
 |
[Page 46] BOON EDAM THT-100 45 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 11.4 TASTG – Curved Shield Tandem Unit Figure 11-1, TASTG 11.5 THT-100TL – Tandem Unit. Figure 11-2, TL Tandem … |
 |
[Page 47] BOON EDAM THT-100 THT-100 46 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA Enclosures In this chapter specific information regarding the project can be added. … |
 |
[Page 48] BOON EDAM THT-100 47 Installation and Maintenance Manual Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6 Royal Boon Edam International B.V. Ambachtstraat 4 / 1135 GG EDAM P.O. Box 40 / 1135 ZG EDAM The Netherlands T +31 (0)299 38 … |
Every day Boon Edam, a leading manufacturer of revolving doors and security barriers, delivers beautiful products that are crafted to perfection. An excellent product deserves a manual equally as great. One that does not require any explanation, and makes life easier for the mechanic and the end user. For Boon Edam this has not always been the case. Bert Dammers, Manager Information & Document Management at Boon Edam, and his team give us a look into what it took to be able take great pride in the company’s manuals.
Professionalization of manuals
In 2014 Boon Edam began to focus on the quality of the manuals. Until then, the team did what they could and what they thought was right knowing that there was room for improvement. The journey to better manuals began when an external partner was called in for help. Bert explains: «We contacted Etteplan, a company that specializes in improving the content creation process of technical documentation including manuals. Our goal was to be more efficient and improve quality at the same time. To achieve this, Etteplan looked at our existing content creation process and conducted a technical analysis on our manuals. They also interviewed colleagues working on the manuals and those actually using them, our customers.»
The conclusions of the analysis were not very positive, to say the least. However, sometimes the inconvenient truth is just what you need to move forward.
In-depth analysis revealed improvement areas
«The analysis showed that there was a lot of room for improvement: The structure of our manuals was not logical and the quality of illustrations was poor. Nor did we have measurement tools to determine the quality. Also, we did not use a structured process, which made it difficult to reuse the content in other materials. Simply put, the way we were working resulted in manuals of relatively low quality.»
Bert Dammers, Manager Information & Document Management at Boon Edam
Recommendations for improving the quality of manuals
«Etteplan recommended that we should start seeing our manuals and documentation as a part of the products we sell with a better focus on the end-user. Another important suggestion was to use Simplified Technical English (STE) for all written text. In addition, the use of technical illustrations was a real must. The advice was to use line drawings instead of pictures to provide more clarity. Finally, we needed a logical and unambiguous structure in all our manuals.»
Before we used pictures like these:
Now we use clear illustrations:
An example of Simplified Technical English:
Before (20 words):
The material may be damaged or the operation of the product affected if the installation procedure is not followed correctly.
After (7 words):
To prevent damage, do the procedures correctly.
Goal setting for new process
Following the recommendations, the team set itself a number of important goals:
- Handling a high-quality standard for technical documentation.
- Introducing status and audit management for technical documentation.
- Ensuring that all manuals could be developed and maintained globally.
- Ensuring that one language is used and that would all work on one platform.
- Providing a basis for product training.
Subsequently, a plan of requirements for the process to create manuals was formulated.
Considerable cost savings and improved quality
By 2016, the necessary steps were taken to complete the implementation process and actually get started with the creation of new manuals. The benefits of the new production process are numerous: the manuals have a more professional look and are a lot more user-friendly. But more than that: Boon Edam is saving costs.
By standardizing the process and using structured content, the content elements can easily be reused in other materials.
For example, Boon Edam now saves
up to 50% in translation costs.
-
Page 1
THT-100 Full Height Turnstile Operation, Installation and Maintenance Manual… -
Page 2: Table Of Contents
Safety INSPECTIONS and MAINTENANCE …………..37 Safety Inspections …………………. 37 ……………………37 AILY NSPECTION Maintenance …………………… 37 ……………………37 EEKLY LEANING ………………37 NNUAL LANNED AINTENANCE ………………….39 AINTENANCE CHECKLIST Troubleshooting ………………….40 Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 3
THT100- T ………………….44 ANDEM 11.4 TASTG – C ……………… 45 URVED HIELD ANDEM 11.5 THT-100TL – T ………………… 45 ANDEM Enclosures ……………………. 46 Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA… -
Page 4: General Information
This manual was prepared and issued by Boon Edam. All rights are reserved. The information in this manual is property of Boon Edam. Disclosure of this information or any part of it to third parties is not permitted, except with prior and express written permission of Boon Edam.
-
Page 5: Product Options
Be aware and avoid contact with moving parts. WARNING! Check that all safety devices and systems are fully operational after installation of the product or after maintenance has been carried out. Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899…
-
Page 6: Operational Safety
2.2 Operational Safety WARNING! Any children or minors using the product must be supervised and accompanied by a responsible adult. Boon Edam does not accept any liability if this rule is not enforced. WARNING! This product should not be considered as a playground.
-
Page 7: Product Description
Shield Assembly passage of the turnstile. Size of the turnstile can vary but is typically small enough to discourage two persons passing the THT-100. The typical sizes of a 25” (50cm) width rotor arm, result in a capacity of 25 to 30 persons per minute in one direction, depending on the authorization system chosen.
-
Page 8: Shield Options
The THT 100 can be configured in a variety of Shield Assembly options. The following shield options are commonly available. B — Shield w/Lexan Pannels A — Standard Shield Figure 3-2: (A) StandardShield and (B) Optional Shield with Lexan Pannels Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 9: Barrier Assembly Options
The Ceiling Plate consists of a flat angled sheet material (in matching finish) which is fixed between the Top Channel Assembly and the Barrier. Ceiling Plate Figure 3-4. Ceiling Plate Exploded View Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899…
-
Page 10: Rotor Arm Options
Figure 3-5. Standard Rotor Arms, (Powder Coat, Stainless or Galvanized) Other possible Options include: A — CSTG C — ASTG B — EL Figure 3-6. Optional Rotor Arms, (CSTG and EL and ASTG) Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 11: Rotor Infill Covers (Option)
3.6 Rotor Infill Covers (Option) Optional infill cover pieces can be ordered which cover the center flange bolt assembly area on the Standard THT-100 rotor arms (note similar snap-in covers are standard on the CSTG, EL and ASTG models). Figure 3-7. Infill Cover (Option) 3.7 Top Chanel Cover Options…
-
Page 12
Installation and Maintenance Manual Figure 3-9. Two Piece Cover (Option) Figure 3-10. Round Canopy Cover (EL Option) Not pictured top channel cover options. • Hinged Cover • Panel Cover • Square Canopy Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6… -
Page 13: Control System
THT-100 3.8 Control System The THT-100 Control Box is located in the upper Top Channel Assembly. Typical mains power supplied to the control system is 110-230VAC (refer to project specific drawings and specifications). Within the Control Box, the Main Control Board (MCB) is powered by a 24VAC power supply system which actuates the locking solenoids which in turn allow the turnstile to lock and unlock.
-
Page 14: Speed Control Unit
Figure 3-13: Top Channel No Speed Control – Standard Figure 3-14: Top Channel Triangle Speed Control (Option) Figure 3-15: Top Channel Gear Speed Control (Option) Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 15: Operating Concept
4 Operating concept 4.1 Operating functions There are many available operating functions of the THT-100 below is a list of typical configuations. Keep in mind that only one configuration is possible per assembly and is determined when the unit is manufactured. Changing the configuration of the unit can require major mechanical changes.
-
Page 16: Access Control System (Acs)
Layout and Rotation Directions 4.2 Access control system (ACS) The THT-100 is designed to integrate with most access control systems by means of an authorization signal. When the THT-100 receives the signal from ACS, the internal control system releases the locking solenoid in the desired rotating direction.
-
Page 17: Optional And Configuration Features
The LED’s illuminate Red when the unit is locked and in stand-by waiting for an authorization. When a valid card read signal is sent from the Access Control System to the THT-100, the LED’s on the respective side will turn Green. Once a user passes through the unit, the LED’s will turn back to Red.
-
Page 18
Figure 4-3. Card Reader Box and Traffic Light (Options) Speed Control Dampening System* THT-100 units are equipped with Optional Speed Control Dampening System to reduce the amount of bounce which the rotor arms can experience after a full rotation when pushed hard. -
Page 19
THT-100 Heel guards* The bottom rotor arms of the THT-100 can be fitted with an optional heel guard protector to reduce direct contact of heels with the rotor arms. If a unit is pushed against a person’s foot or heel the foam rubber protector will reduce the impact. -
Page 20: Installation
Typical packaging/crating of a THT-100 unit consists of similar packaging pictured below. Note: Tandem and Special order unit crating systems may vary. Verify with Boon Edam for exact crate dimensions and weights. The use of a lift is recommended when receiving and offloading the THT-100 unit.
-
Page 21: Tool And Manpower List
THT-100 5.2 Tool and Manpower List Typical THT-100 installations require two men for standing and lifting materials into place. The following tools are needed for installation. • Metric End wrench set • Basic Metric Socket Set • Metric Allen Wrench Set •…
-
Page 22: Anchor Locations
Installation and Maintenance Manual 5.5 Anchor Locations The THT-100 unit is secured to the floor at several locations (Note: the Non-secure and Secure side of the turnstile, Counter-Clockwise and Clockwise rotating directions). It is important to layout the unit as illustrated in Figure 5.2 for proper operation. This manual lays out the unit in a Counter Clockwise Rotation.
-
Page 23: Floor Layout
5.6 Floor layout Typical Layout* Each THT-100 product will be delivered with a two page set of drawings showing the actual dimensions necessary for layout of the unit. The center point of the unit is the best reference for laying out the unit. Additional floor mounting templates are available upon request.
-
Page 24: Mechanical Assembly
Anchor Anchor Secure Hardware Used in this Process Part # Description 3/8” Red Head Anchor HW055 Bolts HW056 3/8” Flat Washer HW057 3/8” Nuts Non-Secure Figure 5-5: Shield and Barrier Anchoring Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 25
Description Various Rotor Arm Assembly HW038 M10 x 1.5 x 20 socket head HW003 M10 Spring Lock Washer Figure 5-7: Bottom Rotor Arm Assembly Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA… -
Page 26
Infill pieces which do not require the mounting pins (Refer to ASTG/CSTG Installation Appendix for further information. Optional Hardware Used in this Process Part # Description Varies Infill Pieces M6 x 40 socket head Figure 5-9: Optional Rotor Infill Pieces Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6… -
Page 27
ASTG CSTG and EL Rotor Arm Assembly (Option) The rotor arms of the ASTG, CSTG, and EL units assemble in the same manner as the standard THT-100 rotor arms and always include a two piece standard snap-in style infill pieces (see figure 5.11) Figure 5-10. -
Page 28
Alignment of these components will assure the proper resting position of the unit (Reference Figure 5.1 for proper rest position example). Alingment Roll Pin Alignment G Figure 5-12: Top Rotor Arm Assembly Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6… -
Page 29
Hardware Used in this Process Part # Description HW001 M5 x 8 Socket HW016 M5 Spring Lock Washer Figure 5-13: Top Channel and Ceiling Plate Bolt Connections Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA… -
Page 30
Hardware Used in this Process Part # Description HW054 M5x0.8 x 13 Bolt HW020 M5 Washer Figure 5-14: Top Channel and Ceiling Plate Connections Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6… -
Page 31: Electrical Installation
Refer to the electrical drawings (E-drawings) for more detailed information. Mains Electrical Connection Electrical service conduit holes are designed into both mid-posts of the THT-100. There are two holes on each side for running mains power, access control, fire alarm or other necessary communications to the unit.
-
Page 32: Main Control Box
Installation and Maintenance Manual 5.9 Main Control Box Cable Connections There are many cables which connect to the Main Control Box. The following cable plugs are typical on the THT-100: Factory Connected : • KS 1 and 2 – Key Switch •…
-
Page 33
Units using dual phase 220 VAC, requires an additional factory supplied fuse located inside the control box. Reference electrical drawings in the appendix 11.2 for additional information. Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899… -
Page 34
SOL ACT SW1 – Solenoid Activation Switch 1 • SOL ACT SW2 – Solenoiod Activation Switch 2 • ROT DET SW 1 – Rotation Detection Switch ACW • ROT DET SW 2 — Rotation Detection Switch CW Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6… -
Page 35: Configuration
Serial Port Interface – Allows the MCB to react to wet voltages (3-25vdc) in leu of dry contact inputs on the X1 terminals. Options for signal transmission TD or SD (Transmit Data), DTR (Data Terminal Ready), RTS (Request to Send Data). Start-up Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899…
-
Page 36: General
Persons should remain clear of the THT-100 top channel mechanism’s moving parts. 5.11 General The THT-100 will be pre-configured by Boon Edam and is ready for general use after proper installation. Setting up the THT-100 for operation can be accomplished by using the start procedure as described below.
-
Page 37: Parts Overview
THT-100 6 Parts Overview 6.1 THT100- Exploded View Figure 6-1: THT-100 Exploded View Part Description Side Shield Card Reader Bracket (Optional) Top Channel Cover Top Channel Mechanism Ceiling Plate Top Flange Assembly Bottom Flange Assembly Base Plate Assembly (w/Bearing) Rotor Arm Assembly (3 Each)
-
Page 38: Safety Inspections And Maintenance
8.2 Semi-Annual Planned Maintenance It is recommended that a minimum of two planned maintenance inspections be performed on the equipment by an Authorized Boon Edam agent to assure proper operation and optimal function. General Inspection •…
-
Page 39
Inspect Fire Alarm functions (if connected) • Inspect Power failure functions • Inspect Dampening system (if equipped) to ensure rotor arms rotate and rest smoothly. Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA… -
Page 40: Maintenance Checklist
……Function: ….. . (Signature and Date) Table 8.1: Maintenance checklist Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 41: Troubleshooting
The fuses are located in the power connection box on the MCB. • Powering down the entire THT-100 by shutting down the power and waiting for approx. 30 seconds before powering it back up. •…
-
Page 42: Technical Specifications
Approx: 800lbs (360kg), including crate (standard version) Installation: Typical Concrete type anchors Cabling: Power supply, fire alarm & communication cables (see drawings) Power supply: Configurable 110-240 VAC, 50/60 Hz Mains Fuse: 2.5 Amp Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 43: Appendices
Typical for FS/FL Combo 100-131 Connecting Spring Typical for FS locking 101-012 2 Way Microswitch Home Position/Rotation Det. 101-015 Microswitch Gasket Isolation material for microswitch Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA…
-
Page 44: Electrical Schematics
Installation and Maintenance Manual 11.2 Electrical Schematics Table 11.1: Electrical Schematic Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 45: Tht100- Tandem Unit
THT-100 11.3 THT100- Tandem Unit The THT-100 is available in a Tandem Unit which incorporates two sets of rotor arms and mechanisms into one extended top channel unit as illustrated in figure below. Installation follows the typical THT100 unit. Part Description…
-
Page 46: Tastg — Curved Shield Tandem Unit
Installation and Maintenance Manual 11.4 TASTG – Curved Shield Tandem Unit Figure 11-1, TASTG 11.5 THT-100TL – Tandem Unit. Figure 11-2, TL Tandem Version : 10//28/2011 Issue : THT-100-IMM-USA REV A6…
-
Page 47: Enclosures
THT-100 Enclosures In this chapter specific information regarding the project can be added. Boon Edam Inc. 402 McKinney Parkway Version: Rev A6 10/28//2011 Tel. 910-814-3800 fax 910-814-3899 Issue: THT-100-IMM-USA…
-
Page 48
Installation and Maintenance Manual Royal Boon Edam International B.V. Boon Edam Ireland Ltd. Boon Edam Spain S.L. Ambachtstraat 4 / 1135 GG EDAM Unit 1 Naas Road Business Park, C/Palència, 14-16 1° 4a P.O. Box 40 / 1135 ZG EDAM…