- Manuals
- Brands
- Dentsply Sirona Manuals
- Medical Equipment
- Intego
- Installation manual
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
12.2018
New as of:
Intego / Intego Pro
Intego Ambidextrous /
Intego Pro Ambidextrous
Installation requirements
English
Related Manuals for Dentsply Sirona Intego
Summary of Contents for Dentsply Sirona Intego
-
Page 1
12.2018 New as of: Intego / Intego Pro Intego Ambidextrous / Intego Pro Ambidextrous Installation requirements English… -
Page 2: Table Of Contents
On-site installation ………………..Substrate, floor………………… 3.1.1 Load-bearing capacity of the floor……….3.1.2 Stability ………………3.1.2.1 With Intego and Intego pro ……….. 3.1.2.2 With Intego Ambidextrous and Intego pro Ambidextrous…………..Requirements of the supply media ………….. 3.2.1 Requirements of the water supply ……….
-
Page 3
Distances in the Intego pro treatment room with Heliodent Plus unit model ………………4.2.7 Side view of Intego pro with Heliodent Plus unit model ….Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 4.3.1 Distances in the Intego Ambidextrous, Intego pro Ambidextrous treatment room……………. -
Page 4: Dentsply Sirona
Table of contents Dentsply Sirona Installation requirements Intego Checklist ……………………. Installation site ………………… Construction requirements…………….IT hardware………………..Network………………….Data processing ………………. 64 57 092 D3543 D3543.021.01.09.02 12.2018…
-
Page 5: General Information
General information Notes on the installation prerequisites This document describes the installation prerequisites for all versions of the Intego treatment center. It contains the following information: ● Required information for practice planning. ● Information for the installer and operator regarding the necessary quality of the air and water supply media.
-
Page 6: Structure Of The Document
1 General information Dentsply Sirona 1.2 Structure of the document Installation requirements Intego Structure of the document 1.2.1 Identification of the danger levels To prevent personal injury and material damage, please observe the warning and safety information provided in these operating instructions.
-
Page 7: Safety Information
For reasons of product safety, this product may be operated only with original Dentsply Sirona parts or third-party parts expressly approved by Dentsply Sirona. In the event of changes which were not foreseen, Dentsply Sirona is not liable for resulting damages.
-
Page 8: On-Site Installation
3 On-site installation Dentsply Sirona 3.1 Substrate, floor Installation requirements Intego On-site installation Substrate, floor Unevenness The floor must be level and horizontal in accordance with DIN 18 202. The compensating plates (A) in the accessory pack can be used for slight unevenness in the floor.
-
Page 9: Stability
3.1 Substrate, floor 3.1.2 Stability 3.1.2.1 With Intego and Intego pro With a concrete floor ● Use a 12mm dia. masonry drill to drill the holes. ● The depth of the holes depends on the condition of the floor. For concrete floor without screed…
-
Page 10: With Intego Ambidextrous And Intego Pro Ambidextrous
3.1 Substrate, floor Installation requirements Intego 3.1.2.2 With Intego Ambidextrous and Intego pro Ambidextrous With a concrete floor ● Use a 12mm dia. masonry drill to drill the holes. ● The depth of the holes depends on the condition of the floor.
-
Page 11: Dentsply Sirona
Dentsply Sirona 3 On-site installation Installation requirements Intego 3.1 Substrate, floor With a wooden floor ● Use a 7 mm dia. wood drill to drill the holes. ● Hole depth is: For wooden floor (D): Hole depth 120 mm (G) 6 or 8 screws 110 mm long (E)
-
Page 12: Requirements Of The Supply Media
3 On-site installation Dentsply Sirona 3.2 Requirements of the supply media Installation requirements Intego Requirements of the supply media * = For use with an Air Venturi air jet pump Suction machine Compressed air (free from oil) The compressor must be able to draw in air in an efficient, hygienic manner.
-
Page 13: Requirements Of The Water Supply
With In- tego, the optional fresh water bottle can be used as a water container, as can the empty disinfec- tant tank with Intego Pro. Sampling and the colony count must be performed by a competent laboratory.
-
Page 14: Connection To The Public Drinking Water System
Connection to the public drinking water system Treatment center isolated from the public drinking water supply The Intego Pro treatment center, if it is equipped with a disinfection system, complies with the requirements of EN 1717 (free discharge with an isolation distance ≥ 20 mm) and the DVGW German Gas and Water Association).
-
Page 15: Installation Of The Water Supply On The Building Side
Dentsply Sirona 3 On-site installation Installation requirements Intego 3.2 Requirements of the supply media 3.2.1.3 Installation of the water supply on the building side ● Carry out the installation in accordance with the national installation requirements (e.g. EN 1717). ● Connect the treatment center to the cold water supply.
-
Page 16: Requirements Of The Air Supply
3 On-site installation Dentsply Sirona 3.2 Requirements of the supply media Installation requirements Intego 3.2.2 Requirements of the air supply The air supply is required to drive the turbines, cool the drill drives, for the cooling spray and to control the treatment center.
-
Page 17: Requirements Of The Suction Machine
– 11 mm: Spray aspirator ● INTEGO: Filter mesh size 1.5 x 3.0 mm ● INTEGO pro: Filter mesh size 1.3 x 1.3 mm ● Sirona recommends using cannulae with a bypass in order to prevent return flow in adhered cannulas.
-
Page 18: Typical Pressure Loss In The Suction System
3 On-site installation Dentsply Sirona 3.2 Requirements of the supply media Installation requirements Intego 3.2.3.1 Typical pressure loss in the suction system Suction flow of large suction hose red (○): Only large suction device black (◊): Saliva ejector in parallel 3.2.4…
-
Page 19: Above-Floor Installation Of Supply Lines
Dentsply Sirona 3 On-site installation Installation requirements Intego 3.3 Above-floor installation of supply lines Above-floor installation of supply lines The supply lines can be installed above the floor (above-floor installation) or through the floor (underfloor installation). For the installation of the supply lines through the floor, see «Underfloor installation of supply lines» …
-
Page 20: Dentsply Sirona
3 On-site installation Dentsply Sirona 3.3 Above-floor installation of supply lines Installation requirements Intego In the case of re-ordering for a retrofit ● For connection from the wall, the above-floor installation kit and a diaphragm are required: – Above-floor installation kit (D) Order No.: 64 43 746 and –…
-
Page 21: Dentsply Sirona
Dentsply Sirona 3 On-site installation Installation requirements Intego 3.3 Above-floor installation of supply lines Suction line DN40 HT-PP ISO 8283-3 (polypropylene, inner diameter approx. 36.5 mm) Compressed air supply Pipe 10×1 mm, corner valve outlet 3/8″ Water supply Pipe 10×1 mm, corner valve outlet 3/8″…
-
Page 22: Underfloor Installation Of Supply Lines
3 On-site installation Dentsply Sirona 3.4 Underfloor installation of supply lines Installation requirements Intego Underfloor installation of supply lines 3.4.1 Installation template We recommend that you order the installation template (REF 33 15 830) from Sirona for laying the pipe ends in the installation field.
-
Page 23: Dentsply Sirona
Dentsply Sirona 3 On-site installation Installation requirements Intego 3.4 Underfloor installation of supply lines Pipe no. Cable Symbol Laying the installation template Water supply Pipe 10×1 mm, corner valve outlet 3/8″ Compressed air supply Pipe 10×1 mm, corner valve outlet 3/8″ Suction line DN40 HT-PP ISO 8283-3…
-
Page 24: Installation Of The Supply Lines In The Termination Panel
3 On-site installation Dentsply Sirona 3.4 Underfloor installation of supply lines Installation requirements Intego 3.4.2 Installation of the supply lines in the termination panel ü An installation template is available or was prepared. 1. Check the position of the supply lines against the installation template as per the practice blueprint.
-
Page 25: Cleaning The Air And Water Pipes
Dentsply Sirona 3 On-site installation Installation requirements Intego 3.5 Cleaning the air and water pipes Cleaning the air and water pipes NOTE Chips and other foreign materials could be flushed and/or blown into the treatment center. Metal chips can cause malfunctions of the pneumatic components.
-
Page 26: Potential Equalization
3 On-site installation Dentsply Sirona 3.6 Potential equalization Installation requirements Intego Potential equalization The treatment center does not require potential equalization The treatment center, monitor, PC and devices connected to the external device connection have the same potential as a result of the wiring of the treatment center.
-
Page 27: Underfloor Installation Of The Pc Connections
Dentsply Sirona 3 On-site installation Installation requirements Intego 3.7 Underfloor installation of the PC connections Underfloor installation of the PC connections Depending on the prevailing local conditions, the existing cable set can be installed in the cable duct of an underfloor installation by an installer.
-
Page 28: Dentsply Sirona
3 On-site installation Dentsply Sirona 3.7 Underfloor installation of the PC connections Installation requirements Intego ➢ Pull the USB , Ethernet, HDMI cables and protective ground wire from the treatment center through the cable duct to the location of the PCs C.
-
Page 29: Dimensions, Technical Data
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.1 Intego dimensions, scale 1:20 Dimensions, technical data Intego dimensions, scale 1:20 4.1.1 Distances in the Intego treatment room 1400 1100 55 1/8” 43 5/16” 2250 88 9/16” 7 7/8” 19 5/8”…
-
Page 30: Intego Side View
4 Dimensions, technical data Dentsply Sirona 4.1 Intego dimensions, scale 1:20 Installation requirements Intego 4.1.2 Intego side view IMPORTANT Recommended room height ≥ 2220 mm Dimensions at the Compact water unit Monitor on lamp support tube Height of dentist element TS or CS…
-
Page 31: Top View Of Intego With Dentist Element Cs
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.1 Intego dimensions, scale 1:20 4.1.3 Top view of Intego with dentist element CS 1240 48 7/8” 75° 30° 7 7/8” 14 3/4” 30° 240° 30° 33 7/8” max. 7 7/8”…
-
Page 32: Top View Of Intego With Dentist Element Ts
4 Dimensions, technical data Dentsply Sirona 4.1 Intego dimensions, scale 1:20 Installation requirements Intego 4.1.4 Top view of Intego with dentist element TS 1240 48 7/8” 75° 30° 7 7/8” 14 3/4” 30° 30° 240° 33 7/8” max. 7 7/8”…
-
Page 33: Top View Of Intego With Options
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.1 Intego dimensions, scale 1:20 4.1.5 Top view of Intego with options TS dentist element CS dentist element 64 57 092 D3543 D3543.021.01.09.02 12.2018…
-
Page 34: Dentsply Sirona
4 Dimensions, technical data Dentsply Sirona 4.1 Intego dimensions, scale 1:20 Installation requirements Intego LEDlight Plus LEDview Plus LEDview Monitor Comfort assistant element…
-
Page 35: Distances In The Intego Treatment Room With Heliodent Plus Unit Model
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.1 Intego dimensions, scale 1:20 4.1.6 Distances in the Intego treatment room with Heliodent Plus unit model Recommended distances from cabinet or wall. Center of the floor cut-out/installation area IMPORTANT! The lamp installed here and the dentist element with/without a tray and the Heliodent Plus have a swivel range which exceeds the specified distances.
-
Page 36: Side View Of Intego With Heliodent Plus Unit Model
Side view of Intego with Heliodent Plus unit model Recommended installation height for wall adapter: 1110 mm (43 3/4“) Cable bushing for radiation cable The radiation cable between Intego and the wall adapter is supplied (12.5 mm outer diameter, max. cable length 10 me- ters (393”). CAUTION The Heliodent Plus radiation cable must not be laid together with USB or HDMI cables.
-
Page 37: Intego Pro Dimensions, Scale 1:20
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.2 Intego pro dimensions, scale 1:20 Intego pro dimensions, scale 1:20 4.2.1 Distances in the Intego pro treatment room 1400 1100 55 1/8” 43 5/16” 2250 88 9/16” 7 7/8” 19 5/8”…
-
Page 38: Intego Pro Side View
4 Dimensions, technical data Dentsply Sirona 4.2 Intego pro dimensions, scale 1:20 Installation requirements Intego 4.2.2 Intego pro side view IMPORTANT Recommended room height ≥ 2220 mm Dimensions at the Comfort water unit (height and swivel range) Monitor on lamp support tube…
-
Page 39: Top View Of Intego Pro With Dentist Element Cs
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.2 Intego pro dimensions, scale 1:20 4.2.3 Top view of Intego pro with dentist element CS 2140 84 1/4” 14° 110° 42° 30° 7 7/8” 90° 240° 14 3/4” 1220 40”…
-
Page 40: Top View Of Intego Pro With Dentist Element Ts
4 Dimensions, technical data Dentsply Sirona 4.2 Intego pro dimensions, scale 1:20 Installation requirements Intego 4.2.4 Top view of Intego pro with dentist element TS 2140 84 1/4” 14° 110° 42° 30° 7 7/8” 90° 240° 14 3/4” 1220 40”…
-
Page 41: Top View Of Intego Pro With Options
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.2 Intego pro dimensions, scale 1:20 4.2.5 Top view of Intego pro with options TS dentist element CS dentist element 64 57 092 D3543 D3543.021.01.09.02 12.2018…
-
Page 42: Dentsply Sirona
4 Dimensions, technical data Dentsply Sirona 4.2 Intego pro dimensions, scale 1:20 Installation requirements Intego LEDlight Plus LEDview Plus LEDview Monitor…
-
Page 43: Distances In The Intego Pro Treatment Room With Heliodent Plus Unit Model
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.2 Intego pro dimensions, scale 1:20 4.2.6 Distances in the Intego pro treatment room with Heliodent Plus unit model Recommended distances from cabinet or wall. Center of the floor cut-out/installation area IMPORTANT!
-
Page 44: Side View Of Intego Pro With Heliodent Plus Unit Model
Dentsply Sirona 4.2 Intego pro dimensions, scale 1:20 Installation requirements Intego 4.2.7 Side view of Intego pro with Heliodent Plus unit model Recommended installation height for wall adapter: 1110 mm (43 3/4“) Cable bushing for radiation cable The radiation cable between Intego and the wall adapter is supplied (12.5 mm outer diameter, max.
-
Page 45: Dimensions For Intego Ambidextrous, Intego Pro Ambidextrous, Scale 1:20
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.3 Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 4.3.1 Distances in the Intego Ambidextrous, Intego pro Ambidextrous treatment room Recommended distances from cabinet or wall.
-
Page 46
4 Dimensions, technical data Dentsply Sirona 4.3 Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 Installation requirements Intego Dentist element TS or CS IMPORTANT! The minimum distance of the rear edge of the chair (with cladding) to the wall or cabinets must be complied with, other- wise the water unit cannot be fully swiveled round. -
Page 47: Side View Of Intego Ambidextrous, Intego Pro Ambidextrous
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.3 Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 4.3.2 Side view of Intego Ambidextrous, Intego pro Ambidextrous IMPORTANT Recommended room height ≥ 2220 mm Dimensions at the Compact water unit…
-
Page 48: Top View Of Intego Ambidextrous, Intego Pro Ambidextrous With Dentist Element Cs
4 Dimensions, technical data Dentsply Sirona 4.3 Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 Installation requirements Intego 4.3.3 Top view of Intego Ambidextrous, Intego pro Ambidextrous with dentist element CS Head support: Length of treatment center with patient height of 176 …
-
Page 49: Top View Of Intego Ambidextrous, Intego Pro Ambidextrous With Dentist Element Ts
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.3 Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 4.3.4 Top view of Intego Ambidextrous, Intego pro Ambidextrous with dentist element TS Head support: Length of treatment center with patient height of 176 …
-
Page 50: Top View Of Intego Ambidextrous, Intego Pro Ambidextrous With Options
4 Dimensions, technical data Dentsply Sirona 4.3 Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 Installation requirements Intego 4.3.5 Top view of Intego Ambidextrous, Intego pro Ambidextrous with options TS dentist element CS dentist element…
-
Page 51: Dentsply Sirona
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.3 Dimensions for Intego Ambidextrous, Intego pro Ambidextrous, scale 1:20 LEDlight Plus LEDview Plus LEDview Monitor 64 57 092 D3543 D3543.021.01.09.02 12.2018…
-
Page 52: Mounting Plates
Adapter plate Adapter plates are available for replacement of one of the following dental treatment centers for a right-handed person with a Intego / Intego Pro treatment center: ● C2, C3, C4, C6, C8 (in the case of C4, year of manufacture 1999-2001, a new drill hole must be drilled in the area of the water unit (C) .)
-
Page 53: Dentsply Sirona
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.4 Mounting plates REF 65 93 433 adapter plate IntegoAmbidextrous cpl.: 64 57 092 D3543 D3543.021.01.09.02 12.2018…
-
Page 54: Dentsply Sirona
4 Dimensions, technical data Dentsply Sirona 4.4 Mounting plates Installation requirements Intego 1/2″ 7 7/8″ 5″ 16 3/8″ 8 5/8″ 9 7/8″ 35 3/8″ 1224 48 2/11″…
-
Page 55: Dentsply Sirona
D on the floor using two screws. Demo chair plate thickness: 10 mm REF 64 46 061 Intego / Intego Pro demo chair plate INTEGO Ambidextrous / INTEGO pro Ambidextrous demo chair plate For floors which do not permit permanent connection of the unit (e.g.
-
Page 56: Dentsply Sirona
4 Dimensions, technical data Dentsply Sirona 4.4 Mounting plates Installation requirements Intego Overall thickness of demo chair plate: 22 mm REF 65 93 383 demo chair plate IntegoAmbidextrous (2-piece) and REF 65 93 433 adapter plate IntegoAmbidextrous cpl.
-
Page 57: Information On Planning For The Practice
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.5 Information on planning for the practice Information on planning for the practice The following file(s) for practice planning are available for download in the dealer area of the Sirona website under DOWNLOADS => CAAD files: ●…
-
Page 58: Technical Data
4 Dimensions, technical data Dentsply Sirona 4.6 Technical data Installation requirements Intego Technical data Model designation: Intego / Intego Pro Power connection: 100 – 240 V AC ± 10% 50/60 Hz Rated current: 3.3 A – 1.5 A at 100 – 240 V also max. 6 A for external devices…
-
Page 59: Operating, Transport And Storage Conditions
Dentsply Sirona 4 Dimensions, technical data Installation requirements Intego 4.6 Technical data 4.6.1 Operating, transport and storage conditions Mode of operation Continuous operation with intermittent loading corresponding to the dental mode of working. Drive motors for chair operation: intermittent use, max. 2 minutes on and 18 minutes off Permanently connected unit.
-
Page 60: Weight And Packaging
Dentsply Sirona 4.6 Technical data Installation requirements Intego 4.6.2 Weight and packaging Dimensions of the packaging Weight (with packaging and ac- cessories/without packaging): Intego CS dentist element: 120 cm x 80 cm x 92 cm 37 kg / 24.5 kg Intego TS dentist element: 120 cm x 80 cm x 71 cm 36 kg / 24 kg Comfort assistant element: 87 cm x 31 cm x 82 cm 10.4 kg / 6 kg…
-
Page 61: Standards/Approvals
“Connection to the public drinking water supply” [→ 14] Original language of this document: German ANVISA registration number: 80745400024 Intego / Intego Pro bear the CE marking in accordance with the provisions of Council Directive 93/42/EEC of June 14, 1993 concerning medical devices.
-
Page 62: Dentsply Sirona
4 Dimensions, technical data Dentsply Sirona 4.7 Standards/Approvals Installation requirements Intego When equipped with a disinfection system or fresh water bottle without switchover to the public drinking water supply, the treatment center complies with the technical rules and requirements on safety and hygiene for connection to the public drinking water supply.
-
Page 63: Electromagnetic Compatibility
5.1 Accessories Electromagnetic compatibility Observance of the following information is necessary to ensure safe operation regarding EMC aspects. Intego complies with the requirements for electromagnetic compatibility (EMC) according to IEC 60601-1-2:2014 Intego is hereinafter referred to as «UNIT». Accessories Connecting the PC The required interface cables can be ordered from Sirona.
-
Page 64: Electromagnetic Emission
5 Electromagnetic compatibility Dentsply Sirona 5.2 Electromagnetic emission Installation requirements Intego Accessories for EMC measurement The EMC measurements were performed with the following PC: PC as peripheral device for checking Fujitsu the interfaces with: ESPRIMO P710 E90+ PC equipment: Processor Intel Core i5 3470;…
-
Page 65: Immunity To Interference
Dentsply Sirona 5 Electromagnetic compatibility Installation requirements Intego 5.3 Immunity to interference Immunity to interference The UNIT is intended for operation in the electromagnetic environment specified below. The customer or user of the UNIT should make sure that it is used in such an environment.
-
Page 66
5 Electromagnetic compatibility Dentsply Sirona 5.3 Immunity to interference Installation requirements Intego Interference immunity IEC 60601-1-2 test Compliance level Electromagnetic environment — tests level guidelines Conducted RF interfer- 3 V d= [1.2] √P ence 150 kHz to 80 MHz IEC 61000-4-6 6 V… -
Page 67
Dentsply Sirona 5 Electromagnetic compatibility Installation requirements Intego 5.3 Immunity to interference Test fre- Volume Service Modulation Power max. Distance Immunity test quency (MHz) level (V/m) (MHz) 380 — 390 TETRA 400 Pulse modula- tion 18 Hz 430 — 470… -
Page 68: Working Clearances
5 Electromagnetic compatibility Dentsply Sirona 5.4 Working clearances Installation requirements Intego Working clearances The UNIT is intended for operation in an electromagnetic environment, where radiated RF interference is checked. The customer or the user of the UNIT can help prevent electromagnetic interference by maintaining…
-
Page 69: Checklist
We recommend performing an inspection of the circumstances on location at least 4 weeks prior to installation. The checklist should help you when doing this. This can help ensure a smooth procedure on the day that the Intego / Intego Pro is actually installed. Installation location: ●…
-
Page 70: Construction Requirements
● Compensating plates can be used for slight unevenness, no mounting plates required. ☐ ● Adapter plates: Intego Pro REF 64 32 061, Intego REF 65 42 018: Can be used to replace ☐ certain C-line dental treatment centers, for details see Mounting plates [→ 52] ●…
-
Page 71: It Hardware
Dentsply Sirona 6 Checklist Installation requirements Intego 6.3 IT hardware IT hardware Mode of operation ☑ ● PC in treatment room ☐ PC system requirements: ☑ IT hardware and software requirements are described in the document «Installation notes and ☐…
-
Page 72: Network
☐ ● Network connection for external PC available. ☐ IMPORTANT! The use of routers between Intego / Intego Pro and the treatment center PC must be avoided. ● Network configuration plan available. ☐ ● Network jacks have been certified. ☐…
-
Page 73: Data Processing
● Is there a DHCP server (dynamic TCP/IP address assignment)? ☐ Yes ☐ No IMPORTANT! A static address should be assigned to Intego / Intego Pro! It must not lie in the dynamic address range! ● Intego / Intego Pro: _____ . _____ . _____ . ____ ●…
-
Page 74
We reserve the right to make any alterations which may be required due to technical improvements. © Sirona Dental Systems GmbH Sprache: englisch Printed in Germany D3543.021.01.09.02 12.2018 Ä.-Nr.: 126 478 Sirona Dental Systems GmbH 64 57 092 D3543 Fabrikstr. 31 Order No …
- Manuals
- Brands
- Sirona Manuals
- Medical Equipment
- Intego
- Service manual
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
kÉï=~ë=çÑW==
fkqbdl=L=fkqbdl=éêç
pÉêîáÅÉ=j~åì~ä
MSKOMNR
Service Manual DARWIN low/DARWIN high
=
båÖäáëÜ
båÖäáëÜ
Related Manuals for Sirona Intego
Summary of Contents for Sirona Intego
-
Page 1
MSKOMNR kÉï=~ë=çÑW== fkqbdl=L=fkqbdl=éêç pÉêîáÅÉ=j~åì~ä båÖäáëÜ båÖäáëÜ Service Manual DARWIN low/DARWIN high… -
Page 2
Table of contents Sirona Dental Systems GmbH Service Manual INTEGO / INTEGO pro Table of contents Structure of the document ………………Identification of danger levels……………. Formats and symbols used …………….Symbols ………………….Abbreviations ………………..General safety information ………………Qualifications of service personnel …………… -
Page 3
Sirona Dental Systems GmbH Table of contents Service Manual INTEGO / INTEGO pro Overview of signal paths for camera control ……….5.10 Acoustic feedback from the treatment center……….5.11 Connecting the motors and turbines in the dentist element ……5.12 Chair movement self-test ……………. -
Page 4
Table of contents Sirona Dental Systems GmbH Service Manual INTEGO / INTEGO pro General: ………………….Removing the cover ………………7.2.1 Patient chair ………………7.2.1.1 Removing the connection box cover ……… 7.2.1.2 Removing the rear covers from the base of the chair .. -
Page 5
Sirona Dental Systems GmbH Table of contents Service Manual INTEGO / INTEGO pro Diagnostic information ………………… Overview …………………. LED concept………………..Function pad concept ………………. Service and configuration of the treatment center……….. 10.1 Setup with EasyPad user interface ………….. 10.1.1 Standard EasyPad user interface………… -
Page 6
Table of contents Sirona Dental Systems GmbH Service Manual INTEGO / INTEGO pro 10.3.5 Default settings …………….152 10.3.5.1 Set the opening time of the cuspidor bowl valve ….152 10.3.5.2 Display of the next maintenance due date ……152 10.3.5.3 Packing position ………….. -
Page 7: Structure Of The Document
Sirona Dental Systems GmbH 1 Structure of the document Service Manual INTEGO / INTEGO pro 1.1 Identification of danger levels Structure of the document Identification of danger levels To prevent personal injury and material damage, please observe the warning and safety information provided in this document. Such…
-
Page 8: Symbols
1 Structure of the document Sirona Dental Systems GmbH 1.3 Symbols Service Manual INTEGO / INTEGO pro Symbols TS dentist element CS dentist element Assistant element Compact Assistant element Comfort Water unitCompact Water unitComfort Patient chair Electrical foot control Pneumatic foot switch…
-
Page 9: Abbreviations
Sirona Dental Systems GmbH 1 Structure of the document Service Manual INTEGO / INTEGO pro 1.4 Abbreviations LEDlight Abbreviations Dentist element Connection box Assistant element Dental treatment center Bootloader BL motor Brushless motor User interface INTEGO with swivel arms Download manager Dürr wet suction system…
-
Page 10: General Safety Information
Sirona accessories or third-party accessories expressly approved by Sirona. The user assumes the risk of using non-approved accessories. If any devices not approved by Sirona are connected, they must comply with the applicable standards, e.g.: ● IEC 60950-1 for data devices (e.g. PC, Ethernet Switch, Ethernet…
-
Page 11: Electrostatic Discharge
Sirona Dental Systems GmbH 2 General safety information Service Manual INTEGO / INTEGO pro 2.5 Electrostatic discharge Electrostatic discharge Use an ESD wrist band. Connect it to the protective ground wire. Please comply with the usual precautionary measures for handling printed circuit boards (ESD). Make sure you touch a ground point to discharge yourself prior to touching the components.
-
Page 12: Prerequisites
The technical documentation and product software are subject to constant updates. Download the current versions from the dealer area of the Sirona home page on a regular basis. Always refer to the DUMC when performing service work. 64 57 316 D3543…
-
Page 13: Technical Data
Sirona Dental Systems GmbH 4 Technical data Service Manual INTEGO / INTEGO pro Technical data Model designation: INTEGO / INTEGO pro Model designation, power ratings Power connection: 100 – 240 V AC ± 10% 50/60 Hz Rated current: 3.3 A–1.5 A at 100–240 V also max.
-
Page 14: Operating, Transport And Storage Conditions
4 Technical data Sirona Dental Systems GmbH 4.1 Operating, transport and storage conditions Service Manual INTEGO / INTEGO pro Operating, transport and storage conditions Mode of operation Continuous operation with intermittent Mode of operation loading corresponding to the dental mode of working.
-
Page 15: Weight And Packaging
Sirona Dental Systems GmbH 4 Technical data Service Manual INTEGO / INTEGO pro 4.2 Weight and packaging Weight and packaging Weight (with packaging / Dentist element Weight, packaging without packaging): CS: 36 kg / 24 kg TS: 37.2 kg / 24.5 kg Assistant element Comfort: 13.2 kg / 6.2 kg…
-
Page 16: Important Information
5 Important information Sirona Dental Systems GmbH 5.1 Storage location for system- and user-specific data Service Manual INTEGO / INTEGO pro Important information Storage location for system- and user-specific data The treatment center features a central unit memory, which is permanently connected to the center. Consequently, data does not have to be backed up and written back if the board is replaced.
-
Page 17: Installing The Treatment Center Software
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.2 Installing the treatment center software Installing the treatment center software Users can install the firmware via the PC program (DUMC) in two different ways. They can either install it directly using the optionally available Ethernet interface or they can copy it onto an SD card and then transfer it to the treatment center.
-
Page 18
5 Important information Sirona Dental Systems GmbH 5.2 Installing the treatment center software Service Manual INTEGO / INTEGO pro Software installation via SD card on EasyPad For details of how to use the DUMC to prepare the SD card for the software update process, please refer to the «Dental Unit Management Console Service Manual»… -
Page 19
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.2 Installing the treatment center software In case of an error The update for the separate CAN nodes (DSA) could not be completed successfully. The treatment station software no. in the download request is invalid. The download manager performs a reset. -
Page 20
5 Important information Sirona Dental Systems GmbH 5.2 Installing the treatment center software Service Manual INTEGO / INTEGO pro Software installation via SD card on EasyTouch For details of how to use the DUMC to prepare the SD card for the software update process, please refer to the «Dental Unit Management Console Service Manual»… -
Page 21
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.2 Installing the treatment center software If the update process is successful, the treatment center starts 10:45:03 and the start dialog is displayed. If there is an inconsistency between software statuses during update, a message is displayed. -
Page 22
5 Important information Sirona Dental Systems GmbH 5.2 Installing the treatment center software Service Manual INTEGO / INTEGO pro IMPORTANT If the IP configuration on the card is incorrect, the treatment center writes a valid IP configuration to the SD card. This is signaled by two beeps. -
Page 23: General
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.3 CAN BUS CAN BUS 5.3.1 General The CAN runs all controllers of the treatment center, all software updates, and all service support cases. On the S-COM, the PC software functions are performed for the user S_COM interface and the user interface software is downloaded via FTP.
-
Page 24: Measurements On The Can Bus
5 Important information Sirona Dental Systems GmbH 5.3 CAN BUS Service Manual INTEGO / INTEGO pro 5.3.2 Measurements on the CAN BUS In each CAN network there are 2x 120-ohm resistors that, measured in Measurement on the CANBUS parallel on the CAN line, result in 60 ohms. If you measure 120 ohms on the CAN line with an ohmmeter (when the dental treatment center is switched off), there is a disruption in the line.
-
Page 25: S-Com
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.4 S-COM S-COM 5.4.1 General On the S-COM, the PC software functions are performed for the user S_COM interface and the user interface software is downloaded via FTP. If the S-COM connection has been established, the S-COM LED lights up on the DSA and on the DAK.
-
Page 26: Measurements On The S-Com Bus
5 Important information Sirona Dental Systems GmbH 5.4 S-COM Service Manual INTEGO / INTEGO pro 5.4.2 Measurements on the S-COM bus In the S-COM network, there are 2x 100-ohm resistors that, measured in parallel on the S-COM line, result in 50 ohms. If you measure 100 ohms on the S-COM line with an ohmmeter (when the dental treatment center is switched off), there is a disruption in the line.
-
Page 27: Rs-485
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.5 RS-485 RS-485 5.5.1 General Communication between the DSA and DHT boards takes place via this interface. 5.5.2 Measurements on the RS-485 interface In the RS-485 network, there are 2x 100-ohm resistors that, measured in parallel on the RS-485 line, result in 50 ohms.
-
Page 28: Can, S-Com, And Rs-485 Wiring Diagram
5 Important information Sirona Dental Systems GmbH 5.6 CAN, S-COM, and RS-485 wiring diagram Service Manual INTEGO / INTEGO pro CAN, S-COM, and RS-485 wiring diagram INTEGO INTEGO pro 64 57 316 D3543 D3543.076.01.04.02 06.2015…
-
Page 29: Safety Switches
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.7 Safety switches Safety switches SS_2 SS_MB SS_4 SS_ASE L443 SS_6 SS_FA SS_5a SS_HV SS_RL SS_7 SS_HV SS_5 SS_HR SS_3a SS_HR SS_3 SS_2 (SS_MB) — cuspidor safety switch LED flashes 2x: DSA SS_CODE (red)
-
Page 30: Water Heater In The Water Unit
5 Important information Sirona Dental Systems GmbH 5.8 Water heater in the water unit Service Manual INTEGO / INTEGO pro Water heater in the water unit If the temperature control of the water heater fails, a reversible temperature fuse on the heater housing switches the heating current in the heating current circuit off directly.
-
Page 31
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.8 Water heater in the water unit INTEGO pro 64 57 316 D3543 D3543.076.01.04.02 06.2015… -
Page 32: Overview Of Signal Paths For Camera Control
5 Important information Sirona Dental Systems GmbH 5.9 Overview of signal paths for camera control Service Manual INTEGO / INTEGO pro Overview of signal paths for camera control The presence of the camera SiroCam F / AF is sent to DAB via Sivision DARWIN connect.
-
Page 33
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.10 Acoustic feedback from the treatment center Beep code General: Beep Priority Cause Code 1 Amalgam centrifuge error Code 2 Amalgam container is full Code 3 Sanitation/no flow Code 4… -
Page 34
5 Important information Sirona Dental Systems GmbH 5.10 Acoustic feedback from the treatment center Service Manual INTEGO / INTEGO pro APEX Beep Priority Cause Code 11 Apex malfunction (beep continues for the duration of the malfunction, min. > 1 sec or – in the case of an Apex HW error or Apex PCB failure –… -
Page 35: Connecting The Motors And Turbines In The Dentist Element
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.11 Connecting the motors and turbines in the dentist element 5.11 Connecting the motors and turbines in the dentist element Various wiring diagrams exist for the motors and turbines due to the different configuration options that are available for the dentist element.
-
Page 36
5 Important information Sirona Dental Systems GmbH 5.11 Connecting the motors and turbines in the dentist element Service Manual INTEGO / INTEGO pro DAI and DAP combination Drives Instrument Connected to Instrument Connected to Instrument Connected to Without motor 1. High- TURB_1 2. -
Page 37
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.11 Connecting the motors and turbines in the dentist element DAI and DAPm combination Drives Instrument Connected to Instrument Connected to Instrument Connected to Without motor 1. High-speed TURB_1 2. -
Page 38
5 Important information Sirona Dental Systems GmbH 5.11 Connecting the motors and turbines in the dentist element Service Manual INTEGO / INTEGO pro Drives Instrument Connected to Instrument Connected to Instrument Connected to Without motor 1. High-speed TURB_1 2. High-speed TURB_2 3. High-speed… -
Page 39: Chair Movement Self-Test
Sirona Dental Systems GmbH 5 Important information Service Manual INTEGO / INTEGO pro 5.12 Chair movement self-test 5.12 Chair movement self-test IMPORTANT GA647 Lifting motor self-test/General Automatic chair movement during treatment center self-test When the treatment center is switched on, the lifting drive briefly moves the chair up and down as part of a self-test.
-
Page 40: Overview Of Modules And Boards
6 Overview of modules and boards Sirona Dental Systems GmbH 6.1 Locations of modules and boards Service Manual INTEGO / INTEGO pro Overview of modules and boards Locations of modules and boards INTEGO The table shows the maximum possible configuration for the boards.
-
Page 41
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.1 Locations of modules and boards Component Board/module TS/CS dentist element Dentist element control, instrument holder detection [ → 56] Dentist element EasyPad user interface [ → 59] Relay module [ →… -
Page 42
6 Overview of modules and boards Sirona Dental Systems GmbH 6.1 Locations of modules and boards Service Manual INTEGO / INTEGO pro INTEGO pro The table shows the maximum possible configuration for the boards. Component Board/module Patient chair Patient chair control [ → 45] LAN interface [ →… -
Page 43
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.1 Locations of modules and boards Component Board/module TS/CS dentist element Dentist element control, instrument holder detection [ → 56] Apex locator [ → 74] Apex mucosal electrode Dentist element EasyPad user interface [ →… -
Page 44: Patient Chair
6 Overview of modules and boards Sirona Dental Systems GmbH 6.2 Patient chair Service Manual INTEGO / INTEGO pro Patient chair 6.2.1 Locations of boards 64 57 316 D3543 D3543.076.01.04.02 06.2015…
-
Page 45: Dsa Board – Patient Chair Control
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.2 Patient chair 6.2.2 DSA board – Patient chair control LEDs and connectors REF_Lift MVP1 MVP2 X303 MVP3 MV34 MV35 36V_MOT MVAB REF_BACKREST X15 X11 X17 X16 X13 X18 X4 X24…
-
Page 46
6 Overview of modules and boards Sirona Dental Systems GmbH 6.2 Patient chair Service Manual INTEGO / INTEGO pro Components on the board Fuses Backup Designation Function 36 V DE Dentist element fuse: 4 A 250 V T 5X20 UR IEC 36 V SC… -
Page 47
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.2 Patient chair Color Function MOT_ERR Flashing: 2 x Lifting drive and/or backrest drive swapped 3 x Invalid drive connected 4 x Lifting drive and/or backrest drive not connected (or defective coding resistor) -
Page 48
6 Overview of modules and boards Sirona Dental Systems GmbH 6.2 Patient chair Service Manual INTEGO / INTEGO pro Color Function yellow Illuminated: Air Venturi active 2x flashes: Solenoid valve shorted or overloaded 3x flashes: Solenoid valve affected by ground fault or line disruption… -
Page 49
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.2 Patient chair Function SS_All Bypass safety switches so that drives can move even if safety switches/foot switch have/has been triggered HEATER_SENS Activate heater OPL_PW_ON Activate LEDlight… -
Page 50
6 Overview of modules and boards Sirona Dental Systems GmbH 6.2 Patient chair Service Manual INTEGO / INTEGO pro Source Destination Location Function X11 -> DSU Water unit USB camera X11 -> DSU Dentist element USB camera X11 -> DSU Assistant element… -
Page 51
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.2 Patient chair Function of the board ● Activation and evaluation of: – The main valve (MVAB) – The valves for tumbler filling (MV34) and water unit flushing (MV35) –… -
Page 52: Dss Board – Dtc Unit Memory
6 Overview of modules and boards Sirona Dental Systems GmbH 6.2 Patient chair Service Manual INTEGO / INTEGO pro 6.2.3 DSS board – DTC unit memory Source Destination Location Function X5 DSA Patient chair Central unit memory Function of the board ● Central unit memory for treatment center 64 57 316 D3543 D3543.076.01.04.02 06.2015…
-
Page 53: Dsl Board – Lan Interface
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.2 Patient chair 6.2.4 DSL board – LAN interface Components on the board LEDs Color Function 5 VDC Green Power supply Green Flashes 1x per second during normal operation…
-
Page 54: Board Dsu — Usb-Hub Chair
External PC Data communication Function of the board ● Communication – Via CAN with the other boards in the INTEGO / INTEGO pro – Via S-COM with the DSA and DAK boards – With external PC via LAN 6.2.5 Board DSU — USB-HUB chair…
-
Page 55: Dentist Element
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element Dentist element 6.3.1 Locations of boards CS dentist element TS dentist element 64 57 316 D3543 D3543.076.01.04.02 06.2015…
-
Page 56: Dab Board – Dentist Element Control
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro 6.3.2 DAB board – Dentist element control IMPORTANT There are two versions of this board. In the case of the TS dentist element, a jumper is connected (JUMP1 causes the holder recognition sequence to be reversed) and the first photoelectric barrier is extended.
-
Page 57
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element Color Function MV21.3 yellow Illuminated: Motor/High-speed handpiece active 2x flashes: Solenoid valve shorted or overloaded 3x flashes: Solenoid valve affected by ground fault or line disruption… -
Page 58
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro Function of the board ● Communication – Via CAN with the DSA – Via CAN with the DAK – Via a serial interface with the DAT –… -
Page 59: Board Dat — Easypad
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element 6.3.3 Board DAT — EasyPad Components on the board LEDs Color Function Green Generated +3.3 V voltage Green Flashes 1x per second during normal operation Flashing: ●…
-
Page 60
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro Measuring points Measuring point Function Voltage measurement Voltage measurement Function of the board Source Destination Location Function X2 DAB Dentist Element Power supply and communication Function of the board ●… -
Page 61: Dak Board — Easytouch User Interface
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element 6.3.4 DAK Board — EasyTouch user interface Function of the board LEDs Color Function 5 V_IN Green 5 V input voltage Green Generated +5 V voltage 3.3 V…
-
Page 62
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro Measuring points Measuring point Function CAN+ Terminating resistor measurement CAN- Terminating resistor measurement Voltage measurement Voltage measurement Function of the board Source Destination… -
Page 63: Dar Board – Relay Module
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element 6.3.5 DAR board – Relay module Components on the board LEDs Color Function Green 36V input voltage Green Generated +12 V voltage Green…
-
Page 64
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro Connector Source Destination Location Function Mini LED Mini LED X8 DAP Dentist Element APEX, light X9 DAP Dentist Element Power supplies, CAN, Apex on, motor… -
Page 65: Dai Board – Instrument Light Supply
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element 6.3.6 DAI board – Instrument light supply Components on the board LEDs Color Function 36 V Green 36 V input voltage SPRAYVIT yellow…
-
Page 66
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro Measuring points Measuring point Function 36 V Voltage measurement Voltage measurement Function of the board Source Destination Location Function X6 DAB Dentist element… -
Page 67: Dau1 Board – Usb Hub
BF according to IEC 60601-1, for example, the intraoral X-ray system XIOS XG USB module from Sirona. ● Provides a USB 2.0 interface (round ODU connector) for the Sirona camera. 64 57 316 D3543…
-
Page 68: Dau2 Board – Usb Hub
BF according to IEC 60601-1, for example, the intraoral X-ray system XIOS XG USB module from Sirona. ● Provides a USB 2.0 interface (round ODU connector) for the Sirona camera. 64 57 316 D3543…
-
Page 69: Dap Board – Instrument Control
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element 6.3.9 DAP board – Instrument control Components on the board LEDs Color Function Green 36 V input voltage Green Generated +12 V voltage…
-
Page 70
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro Color Function BOOT yellow Lights up after switching on and remains lit until completion of the boot process INSTR yellow Off: Instrument deposited… -
Page 71
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element Source Destination Location Function X10 DAR Dentist Element Instrument light Motor 1 Dentist element flange Instrument control Function of the board ● Communication via CAN with the DAR ●… -
Page 72: Board Dapm — Instrument Control
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro 6.3.10 Board DAPm — instrument control 3,3VANA BOOT CAN+ ERROR RESET INSTR INST_ACTIVE LIGHT FS_ACTIVE CAN — 5V_ISO X4 / X9 Components on the board…
-
Page 73
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element Color Function BOOT yellow Lights up after switching on and remains lit until completion of the boot process INSTR yellow Off: Instrument deposited… -
Page 74: Naa Board — Apex Locator
6 Overview of modules and boards Sirona Dental Systems GmbH 6.3 Dentist element Service Manual INTEGO / INTEGO pro 6.3.11 NAA board — Apex locator NAA — Apex locator Overview of DARWIN board Components on the board LEDs Color Function 36VDC Green 36 V input voltage Green Generated -5 V voltage +3.3V…
-
Page 75
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.3 Dentist element NAH — Apex mucosal electrode Overview of Apex DARWIN Components on the board Connector Source Destination Location Function Apex lip clip/file clamp Dentist element… -
Page 76: Water Unit
6 Overview of modules and boards Sirona Dental Systems GmbH 6.4 Water unit Service Manual INTEGO / INTEGO pro Water unit 6.4.1 Locations of boards Water unitCompact Water unitComfort 64 57 316 D3543 D3543.076.01.04.02 06.2015…
-
Page 77: Dwem Board Compact Water Unit Control
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.4 Water unit 6.4.2 DWEm board compact water unit control X13 X12 CAN- CAN+ DS30 Components on the board LEDs Color Function 36 V Green 36 V input voltage…
-
Page 78
6 Overview of modules and boards Sirona Dental Systems GmbH 6.4 Water unit Service Manual INTEGO / INTEGO pro Color Function MV33 yellow Illuminated: Activation of place selection valve active 2x flashes: Solenoid valve shorted or overloaded 3x flashes: Solenoid valve affected by ground fault or line disruption… -
Page 79
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.4 Water unit Source Destination Location Function X30 DSA Patient chair SCOM, CAN, foot switch, power supply X30 DAB Dentist element SCOM, CAN, foot switch, power supply… -
Page 80: Dwe Board – Comfort Water Unit Control
6 Overview of modules and boards Sirona Dental Systems GmbH 6.4 Water unit Service Manual INTEGO / INTEGO pro 6.4.3 DWE board – Comfort water unit control X15 X16 X27 X13 X12 X31 X30 CAN- CAN+ DS32 DS30 DS31 Components on the board…
-
Page 81
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.4 Water unit Color Function yellow Illuminated: Dentosept solenoid valve active 2x flashes: Solenoid valve shorted or overloaded 3x flashes: Solenoid valve affected by ground fault or line disruption… -
Page 82
6 Overview of modules and boards Sirona Dental Systems GmbH 6.4 Water unit Service Manual INTEGO / INTEGO pro Color Function DN30/DS yellow Illuminated: Water monitor active (DN30)/ Level detection for cuspidor valve: reed switch DS actuated DS51 yellow Illuminated: Chemical flushing for suction hose cleaning active… -
Page 83
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.4 Water unit Source Destination Location Function DS51/MV51 Water unit Control of chemical tank MSBV — Dürr wet suction system Water unit Control of cuspidor valve… -
Page 84: Dwb Board – Compact Water Unit Control
6 Overview of modules and boards Sirona Dental Systems GmbH 6.4 Water unit Service Manual INTEGO / INTEGO pro 6.4.4 DWB board – Compact water unit control Components on the board LEDs Color Function 36 V Green 36 V input voltage 21 V…
-
Page 85
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.4 Water unit Function pads Function pads Function ASE_SUC Switch ON (removal of suction on assistant element) DS30 Reed_Sep Start suction machine in order to empty the cuspidor valve… -
Page 86
6 Overview of modules and boards Sirona Dental Systems GmbH 6.4 Water unit Service Manual INTEGO / INTEGO pro Function of the board ● Detection of instrument removal in assistant element ● Control of automatic separation ● Control of cuspidor valve in Dürr wet suction system ●… -
Page 87: Nwm Board — Automatic Tumbler Filling
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.4 Water unit 6.4.5 NWM board — Automatic tumbler filling Components on the board Intego description LEDs LEDs Color Function LED1 +15V Green 15 V operating voltage…
-
Page 88: Dwv Board – Air Venturi, Ledview
6 Overview of modules and boards Sirona Dental Systems GmbH 6.4 Water unit Service Manual INTEGO / INTEGO pro 6.4.6 DWV board – Air Venturi, LEDview Components on the board LEDs Color Function OPL_ON green Illuminated: LEDview power supply active Connector Source…
-
Page 89: Dhi Board – Instrument Light Supply
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.4 Water unit 6.4.7 DHI board – Instrument light supply Components on the board LEDs Color Function Green 5 V input voltage HOLDER yellow Illuminated: Instrument removal active…
-
Page 90: Assistant Element
6 Overview of modules and boards Sirona Dental Systems GmbH 6.5 Assistant element Service Manual INTEGO / INTEGO pro Assistant element 6.5.1 Locations of boards Assistant element Comfort Assistant element Compact 64 57 316 D3543 D3543.076.01.04.02 06.2015…
-
Page 91: Nop Board — 5 V Power Supply
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.5 Assistant element 6.5.2 NOP board — 5V power supply Overview of Intego board Components on the board LEDs Color Function 33VDC Green Operating voltage 5VDC…
-
Page 92: Dhi Board – Instrument Light Supply
6 Overview of modules and boards Sirona Dental Systems GmbH 6.5 Assistant element Service Manual INTEGO / INTEGO pro 6.5.3 DHI board – Instrument light supply Components on the board LEDs Color Function Green 5 V input voltage HOLDER yellow Illuminated: Instrument removal active…
-
Page 93: Dht Board – Standard User Interface
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.5 Assistant element 6.5.4 DHT board – Standard user interface Components on the board LEDs Color Function green 5 V input voltage 3.3 V green Generated 3.3 V voltage…
-
Page 94: Ledview
6 Overview of modules and boards Sirona Dental Systems GmbH 6.6 LEDview Service Manual INTEGO / INTEGO pro LEDview 6.6.1 NLV board — LEDview control Components on the board DARWIN description LEDs Color Function 24-32VDC Green 32V input voltage 3.3 VDC Green 3.3V operating voltage…
-
Page 95
Sirona Dental Systems GmbH 6 Overview of modules and boards Service Manual INTEGO / INTEGO pro 6.6 LEDview Connector Source Destination Location Function X45 DWE Water unit Power supply X45 DWEm Water unit Power supply X45 DWB Water unit Power supply X45 DWV… -
Page 96: Replacing Components
7 Replacing components Sirona Dental Systems GmbH 7.1 General: Service Manual INTEGO / INTEGO pro Replacing components General: NOTICE Disconnecting a component from the chair A large volume of water can escape from the connections when disconnecting a component. ➢ Drain the disinfectant tank (see Disinfectant tank [ → 119]) and the mixing tank (see Mixing tank [ →…
-
Page 97: Removing The Cover
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.2 Removing the cover Removing the cover 7.2.1 Patient chair 7.2.1.1 Removing the connection box cover 1. Remove the screws (B) from the connection box cover (A). Removing the connection box cover 2.
-
Page 98: Removing The Localizer Cover
7 Replacing components Sirona Dental Systems GmbH 7.2 Removing the cover Service Manual INTEGO / INTEGO pro 7.2.1.3 Removing the localizer cover 1. Press the 2 springs (A) inwards. 2. Remove the localizer cover (B). ➢ When reattaching it, make sure that the spring lies in the groove (C).
-
Page 99: Ts Dentist Element
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.2 Removing the cover 7.2.2 TS dentist element 7.2.2.1 Removing the arm cover sections 1. Pry open the covering on the front joint cover and remove it. 2. Unscrew the two screws completely and take off the bottom half of the cover.
-
Page 100
7 Replacing components Sirona Dental Systems GmbH 7.2 Removing the cover Service Manual INTEGO / INTEGO pro 6. Pull the rear cover sections off the support arm. 7. Unscrew the screw from the bottom cover completely and remove the cover. 8. Remove the top half of the cover. -
Page 101: Opening The Dentist Element
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.2 Removing the cover 7.2.2.2 Opening the dentist element ✔ The treatment center is switched off and the instruments have been put aside. 1. Unscrew the 6 screws from the underside of the dentist element.
-
Page 102: Cs Dentist Element
7 Replacing components Sirona Dental Systems GmbH 7.2 Removing the cover Service Manual INTEGO / INTEGO pro 7.2.3 CS dentist element 7.2.3.1 Removing the arm cover sections 1. Pry open the covering on the front joint cover and remove it. 2. Unscrew the two screws completely and take off the bottom half of the cover.
-
Page 103
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.2 Removing the cover 6. Pull the rear cover sections off the support arm. 7. Unscrew the screw from the bottom cover completely and remove the cover. 8. Remove the top half of the cover. -
Page 104: Opening The Cs Dentist Element
7 Replacing components Sirona Dental Systems GmbH 7.2 Removing the cover Service Manual INTEGO / INTEGO pro 7.2.3.2 Opening the CS dentist element 1. Screw the 6 screws to the underside of the dentist element. 2. Tilt the cover to the front.
-
Page 105
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.2 Removing the cover 7.2.3.2.1 Placing the cover in the service position (dentist element CS) ➢ Fasten the cover in the service position. Make sure that the tabs are inserted into the holes provided for them. -
Page 106: Comfort Assistant Element
7 Replacing components Sirona Dental Systems GmbH 7.2 Removing the cover Service Manual INTEGO / INTEGO pro 7.2.4 Comfort assistant element 7.2.4.1 Removing covers 1. Take off the filter cover. 2. Remove the filter element. D H T 3. Unscrew the 4 screws completely.
-
Page 107
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.2 Removing the cover 5. If present, pull connector X24 from cable L507 off the DHT board. 6. Remove all microswitches from their positions in the upper panel. IMPORTANT Mark the position of the individual microswitches. -
Page 108: Compact Assistant Element
7 Replacing components Sirona Dental Systems GmbH 7.2 Removing the cover Service Manual INTEGO / INTEGO pro 7.2.5 Compact assistant element 7.2.5.1 Removing covers ✔ The paneling of the water unit has been removed. Removing the ASE compact cover 1. Loosen and remove the six screws.
-
Page 109: Comfort Water Unit
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.2 Removing the cover 7.2.6 Comfort water unit Removing the panels of the water unit (comfort WU) 1. Carefully pry the side panels (A) apart and pull them away.
-
Page 110
7 Replacing components Sirona Dental Systems GmbH 7.2 Removing the cover Service Manual INTEGO / INTEGO pro 8. Remove the two screws from the lid (G) and lift it off. 9. Remove the cover panel (H) of the funnel. NOTICE Watch out for the latching nose (I). -
Page 111: Compact Water Unit
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.2 Removing the cover 7.2.7 Compact water unit Removing the panel of the water unit (compact WU) 1. Gently lift the cover (E) and remove it. 2. Remove the lid (F).
-
Page 112
7 Replacing components Sirona Dental Systems GmbH 7.2 Removing the cover Service Manual INTEGO / INTEGO pro CAUTION There is a risk of cover sections falling off during disassembly. ➢ If necessary, use your hand to support the cover sections. 6. Carefully pry the side covers (A) apart (detent) and pull them away. -
Page 113: Replacing Boards
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.3 Replacing boards Replacing boards 7.3.1 Important information when replacing boards 7.3.2 Removing a board from the CS dentist element DAB board ✔ The treatment center is switched off.
-
Page 114: Board Removal In The Assistant Element Compact
7 Replacing components Sirona Dental Systems GmbH 7.3 Replacing boards Service Manual INTEGO / INTEGO pro ✔ The treatment center is switched off. ✔ The cover has been removed (see Opening the dentist element [ → 101]). 1. Pull connectors X6, X19, and X30 off the board.
-
Page 115
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.3 Replacing boards 4. Unscrew the remaining screw and remove the cast part from the upper cover. 5. Unscrew the two screws from board DHT and remove the board. -
Page 116
7 Replacing components Sirona Dental Systems GmbH 7.3 Replacing boards Service Manual INTEGO / INTEGO pro IMPORTANT The bearing race (B) must be aligned with the groove (E) on the counterpart guide. Check the free movement of the assistant element and, if necessary, correct the position of the bearing race (B). -
Page 117: Mechanical Components
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.4 Mechanical components Mechanical components 7.4.1 Support arm brake ✔ The pressure in the treatment center is released. ✔ The support arm cover is removed. ✔ The gas pressure spring is depressurized.
-
Page 118: Hydraulic/Pneumatic Modules
7 Replacing components Sirona Dental Systems GmbH 7.5 Hydraulic/pneumatic modules Service Manual INTEGO / INTEGO pro Hydraulic/pneumatic modules NOTICE Pressurized modules Modules are pressurized Modules that carry water and air may still be pressurized after switching off the treatment center. Pressure in the water lines behind the disinfection system is released after switching off.
-
Page 119: Disinfectant Tank
Sirona Dental Systems GmbH 7 Replacing components Service Manual INTEGO / INTEGO pro 7.5 Hydraulic/pneumatic modules 7.5.3 Disinfectant tank Before replacing the disinfectant tank, it must be completely emptied. ✔ The treatment center is switched off. Disinfectant tank drain DARWIN ✔ The panels are removed.
-
Page 120: Adjusting The Comfort Assistant Element Brakes
8 Mechanical adjustments Sirona Dental Systems GmbH 8.1 Adjusting the comfort assistant element brakes Service Manual INTEGO / INTEGO pro Mechanical adjustments Adjusting the comfort assistant element brakes General Adjusting the comfort assistant element brakes IMPORTANT Brake force of the brakes The brakes on the Comfort assistant element are configured at the factory.
-
Page 121
Sirona Dental Systems GmbH 8 Mechanical adjustments Service Manual INTEGO / INTEGO pro 8.1 Adjusting the comfort assistant element brakes ➢ To increase the brake force: Using a slotted screwdriver, turn the screw (B) inwards. ➢ Reduce brake force: Use a slotted screwdriver to loosen the screw (B). -
Page 122: Adjusting The Brakes
8 Mechanical adjustments Sirona Dental Systems GmbH 8.2 Adjusting the brakes Service Manual INTEGO / INTEGO pro Adjusting the brakes IMPORTANT The brakes are preset. Only adjust the brakes if this is required. ➢ Remove the panel from the front and rear support arm if they are still Setting the support arm and support column brake (dentist element) in place.
-
Page 123: Adjusting The Support Arm And Support Column Brakes On Ledview
Sirona Dental Systems GmbH 8 Mechanical adjustments Service Manual INTEGO / INTEGO pro 8.3 Adjusting the support arm and support column brakes on LEDview Adjusting the support arm and support column brakes on LEDview Adjusting the brake on the support column Adjusting the support arm and support column brakes (LEDview) IMPORTANT This brake is not preset.
-
Page 124: Adjusting Other Joint Brakes
8 Mechanical adjustments Sirona Dental Systems GmbH 8.4 Adjusting other joint brakes Service Manual INTEGO / INTEGO pro Adjusting other joint brakes Position of the joint brakes Adjusting other joint brakes Joint between support arm and light crown Joint on support arm IMPORTANT The brakes at positions (A) and (B) are adjusted at the factory.
-
Page 125
Sirona Dental Systems GmbH 8 Mechanical adjustments Service Manual INTEGO / INTEGO pro 8.4 Adjusting other joint brakes Adjusting the front joint brakes 1. To adjust the brake at position (A), remove covers (D) and (E) as shown in the illustration. 2. Adjust the brake at position (A) by tightening or loosening the screw (F). -
Page 126: Checking And Setting Brakes And Spring Force On The Dentist Element
8 Mechanical adjustments Sirona Dental Systems GmbH 8.5 Checking and setting brakes and spring force on the dentist element Service Manual INTEGO / INTEGO pro Checking and setting brakes and spring force on the dentist element 8.5.1 Checking the spring force of the flexible support arm ✔…
-
Page 127
Sirona Dental Systems GmbH 8 Mechanical adjustments Service Manual INTEGO / INTEGO pro 8.5 Checking and setting brakes and spring force on the dentist element If the spring force is set correctly the dentist element should remain in a floating state in a position between the upper and lower endstops. -
Page 128: Setting The Spring Force Of The Flexible Support Arm
8 Mechanical adjustments Sirona Dental Systems GmbH 8.5 Checking and setting brakes and spring force on the dentist element Service Manual INTEGO / INTEGO pro 8.5.2 Setting the spring force of the flexible support arm IMPORTANT The spring force is set at the factory Only adjust the spring force in the following cases: ➢…
-
Page 129
Sirona Dental Systems GmbH 8 Mechanical adjustments Service Manual INTEGO / INTEGO pro 8.5 Checking and setting brakes and spring force on the dentist element Adjusting the spring force ➢ Adjust the spring force by adjusting the screw (F), so that the dentist element remains in a swinging state between the upper and lower endstops. -
Page 130: Adjusting The Brakes
8 Mechanical adjustments Sirona Dental Systems GmbH 8.5 Checking and setting brakes and spring force on the dentist element Service Manual INTEGO / INTEGO pro 8.5.3 Adjusting the brakes IMPORTANT The brakes are preset. Only adjust the brakes if this is required.
-
Page 131: Removing/Fitting Panels On The Support Arm
Sirona Dental Systems GmbH 8 Mechanical adjustments Service Manual INTEGO / INTEGO pro 8.5 Checking and setting brakes and spring force on the dentist element 8.5.4 Removing/fitting panels on the support arm Removing panels from the front support arm Removing panel from the front support arm 1.
-
Page 132
8 Mechanical adjustments Sirona Dental Systems GmbH 8.5 Checking and setting brakes and spring force on the dentist element Service Manual INTEGO / INTEGO pro Removing panels from the rear support arm Removing panel from the rear support arm ➢ Take the side panel (J) off from both sides. -
Page 133
Sirona Dental Systems GmbH 8 Mechanical adjustments Service Manual INTEGO / INTEGO pro 8.5 Checking and setting brakes and spring force on the dentist element 3. Attach the panel (H). To do so, push the panel slightly apart and insert it vertically. Ensure that the guide pins (J) lock into the guide holes (K). -
Page 134
Sirona Dental Systems GmbH 8.5 Checking and setting brakes and spring force on the dentist element Service Manual INTEGO / INTEGO pro 7. Attach the panel (D). To do so, push the panel slightly apart and insert it vertically. Ensure that the guide pins (J) lock into the guide holes (K). -
Page 135: Diagnostic Information
Sirona Dental Systems GmbH 9 Diagnostic information Service Manual INTEGO / INTEGO pro 9.1 Overview Diagnostic information Overview To assist with error diagnostics, the boards feature LEDs, function pads, and buttons. The LEDs and function pads can be used to analyze the error to see if it is located at the input circuit, at the output circuit, or on the board.
-
Page 136: Function Pad Concept
9 Diagnostic information Sirona Dental Systems GmbH 9.3 Function pad concept Service Manual INTEGO / INTEGO pro Error display Errors are indicated by means of flashing codes. The red ERROR LED on the board provides information about each error. The flashing codes indicate the possible cause of the error by emitting a certain number of flashing pulses.
-
Page 137: Service And Configuration Of The Treatment Center
Sirona Dental Systems GmbH 10 Service and configuration of the treatment center Service Manual INTEGO / INTEGO pro 10.1 Setup with EasyPad user interface Service and configuration of the treatment center 10.1 Setup with EasyPad user interface 10.1.1 Standard EasyPad user interface EasyPad displays The EasyPad user interface is equipped with seven-segment displays.
-
Page 138: Setting The Time And Date
10 Service and configuration of the treatment center Sirona Dental Systems GmbH 10.1 Setup with EasyPad user interface Service Manual INTEGO / INTEGO pro Fixed keys without a function Fixed keys for functions not included with the treatment center have no function on the user interface. This applies only to keys with dual functions for the options of integrated torque control: The integrated torque control cannot be activated in this case.
-
Page 139: Presetting The Timer
2. Confirm with the favorite key. 10.1.5 Setting the purging time for the autopurge function The autopurge function is only available on the INTEGO pro treatment center. The purging time for the autopurge function can be set between 60 and 180 seconds.
-
Page 140: Adjusting The Cleaning Agent Mixture For Chemical Suction Hose
10 Service and configuration of the treatment center Sirona Dental Systems GmbH 10.1 Setup with EasyPad user interface Service Manual INTEGO / INTEGO pro 10.1.6 Adjusting the cleaning agent mixture for chemical suction hose cleaning The chemical suction hose cleaning option is only available for the INTEGO pro.
-
Page 141: Switching The Key Sound On/Off
Sirona Dental Systems GmbH 10 Service and configuration of the treatment center Service Manual INTEGO / INTEGO pro 10.2 Service settings with the EasyPad user interface 10.1.9 Switching the key sound on/off A setting can be made to issue an acoustic signal when the operator presses a button on the dentist or assistant element.
-
Page 142: Amalgam Test
10 Service and configuration of the treatment center Sirona Dental Systems GmbH 10.2 Service settings with the EasyPad user interface Service Manual INTEGO / INTEGO pro 10.2.4 Amalgam test ➢ Press favorites button 3. The message system is working if a signal is sounded when the button is pressed.
-
Page 143: Assigning An Instrument To Holder 3
Sirona Dental Systems GmbH 10 Service and configuration of the treatment center Service Manual INTEGO / INTEGO pro 10.2 Service settings with the EasyPad user interface 10.2.7 Assigning an instrument to holder 3 ✔ The focus is on the assignment of the instrument type and the instrument type flashes.
-
Page 144: Safety Switch Test
10 Service and configuration of the treatment center Sirona Dental Systems GmbH 10.2 Service settings with the EasyPad user interface Service Manual INTEGO / INTEGO pro 10.2.10 Safety switch test Safety switch test ✔ No safety switch has been triggered. 1. Test the safety switch by triggering it.
-
Page 145: Factory Setting
Sirona Dental Systems GmbH 10 Service and configuration of the treatment center Service Manual INTEGO / INTEGO pro 10.2 Service settings with the EasyPad user interface 10.2.13 Factory setting ➢ Press favorites button 3. The treatment center is restored to the factory settings.
-
Page 146: Service Settings With Easytouch User Interface
10 Service and configuration of the treatment center Sirona Dental Systems GmbH 10.3 Service settings with EasyTouch user interface Service Manual INTEGO / INTEGO pro 10.3 Service settings with EasyTouch user interface 10.3.1 Opening the Service domain ✔ All instruments are in place. The start dialog is displayed on the 10:45:03 touchscreen.
-
Page 147: Entry Dialog
Sirona Dental Systems GmbH 10 Service and configuration of the treatment center Service Manual INTEGO / INTEGO pro 10.3 Service settings with EasyTouch user interface Instrument allocation for tray 2 and 3 Instrument allocation for tray 2 and 3 Default settings 10.3.2…
-
Page 148: Amalgam Separator Test
10 Service and configuration of the treatment center Sirona Dental Systems GmbH 10.3 Service settings with EasyTouch user interface Service Manual INTEGO / INTEGO pro 10.3.2.2 Amalgam separator test Amalgam separator test ➢ Hold down the button. The message system is working if a signal is sounded when the button is pressed.
-
Page 149: Display Service Code List
Sirona Dental Systems GmbH 10 Service and configuration of the treatment center Service Manual INTEGO / INTEGO pro 10.3 Service settings with EasyTouch user interface 10.3.2.5 Display service code list ✔ The entry dialog of the service domain is displayed. ➢ Touch the error log key.
-
Page 150
10 Service and configuration of the treatment center Sirona Dental Systems GmbH 10.3 Service settings with EasyTouch user interface Service Manual INTEGO / INTEGO pro 10.3.2.6.1 Software version ➢ (A) displays the full software status of the treatment unit. If the software version is in brackets, at least one component is not at the latest software status. -
Page 151: Instrument Allocation For Tray 2 And 3
Sirona Dental Systems GmbH 10 Service and configuration of the treatment center Service Manual INTEGO / INTEGO pro 10.3 Service settings with EasyTouch user interface 10.3.2.6.4 Water unit service information ✔ If the field is orange, the option has been detected. ➢ (A) Mouth rinse basin ➢…
-
Page 152: Default Settings
10 Service and configuration of the treatment center Sirona Dental Systems GmbH 10.3 Service settings with EasyTouch user interface Service Manual INTEGO / INTEGO pro 10.3.5 Default settings Set the opening time of the cuspidor bowl valve 10.3.5.1 The opening time of the mouth rinse basin valve can be set between 0 and 2 seconds in steps of 0.1 seconds.
-
Page 153: Reading Service Codes
(readout and storage of service information) ● Firmware installation For more information about this program, please refer to the DUMC user «6194497» manual: This program is available in the service area of the Sirona website. 64 57 316 D3543 D3543.076.01.04.02 06.2015…
-
Page 154: Pc Connection, Networking
Control of PC programs via the treatment center SIUCOM plus enables you to control PC applications through the INTEGO / INTEGO pro Sirona treatment center. The PC functions can be operated via the user interface of the treatment center (touch screen) or the system foot control.
-
Page 155: Biofilm Removal
Sirona Dental Systems GmbH 11 Biofilm removal Service Manual INTEGO / INTEGO pro 11.1 Approved resources for biofilm removal Biofilm removal 11.1 Approved resources for biofilm removal The following products from ALPRO MEDICAL GmbH are approved for biofilm removal: Cleaning agent: ● REF 3179-N or REF 3179-PM ●…
-
Page 156
11 Biofilm removal Sirona Dental Systems GmbH 11.2 Preparation Service Manual INTEGO / INTEGO pro 6. Remove the filter and the sealing washer from AF2 and AF6 (A and 7. Remove the surface filter from AF5 (C) on the water heater if present. -
Page 157: Execution
Sirona Dental Systems GmbH 11 Biofilm removal Service Manual INTEGO / INTEGO pro 11.3 Execution 11.3 Execution Preparation / cleaning solution 1 WARNING Wear safety gloves, safety goggles and mouth and nose protection when performing the following work. 1. Mix cleaning solution 1 in accordance with the manufacturer’s instructions.
-
Page 158
11 Biofilm removal Sirona Dental Systems GmbH 11.3 Execution Service Manual INTEGO / INTEGO pro Preparation / cleaning solution 2 1. Mix cleaning solution 2 in accordance with the manufacturer’s instructions. 2. If there is a fresh water bottle present: Pour 1.5 liters of the solution into the fresh water bottle. -
Page 159: Re-Processing
Sirona Dental Systems GmbH 11 Biofilm removal Service Manual INTEGO / INTEGO pro 11.4 Re-processing 11.4 Re-processing 1. Remove the biofilm removal device. WARNING Drops of the cleaning solution contain acids / alkalines and may affect surrounding parts. Carefully loosen the adapter from the sanitary hose.
-
Page 160
11 Biofilm removal Sirona Dental Systems GmbH 11.4 Re-processing Service Manual INTEGO / INTEGO pro 7. If there is a disinfection system installed: Fill the disinfection tank with disinfectant (Dentosept P, Bilpron). 8. Rinse all instrument hoses carrying water for approx. 30 seconds by activating multiple times. -
Page 162
tÉ=êÉëÉêîÉ=íÜÉ=êáÖÜí=íç=ã~âÉ=~åó=~äíÉê~íáçåë=ïÜáÅÜ=ã~ó=ÄÉ=êÉèìáêÉÇ=ÇìÉ=íç=íÉÅÜåáÅ~ä=áãéêçîÉãÉåíëK «=páêçå~=aÉåí~ä=póëíÉãë=dãÄe=OMNR péê~ÅÜÉW ÉåÖäáëÅÜ mêáåíÉÇ=áå=dÉêã~åó aPRQPKMTSKMNKMQKMO MSKOMNR ûKJkêKW= NNV=SNT páêçå~=aÉåí~ä=póëíÉãë=dãÄe áå=íÜÉ=rp^W SQ=RT=PNS=aPRQP c~Äêáâëíê~≈É=PN páêçå~=aÉåí~ä=póëíÉãë=ii` lêÇÉê=kç aJSQSOR=_ÉåëÜÉáã= QUPR=páêçå~=aêáîÉI=pìáíÉ=NMM dÉêã~åó `Ü~êäçííÉI=k`=OUOTP ïïïKëáêçå~KÅçã…
Table of Contents for Sirona Intego:
-
64 57 498 D3543 230 D3543.201.01.05.02 08.2016 5Care, cleaning and maintenance by the practice team Sirona Dental Systems GmbH 5.3Instruments and instrument hoses Operating Instructions INTEGO 5.3.5 Lubricate, disinfect/sterilize the treatment instruments 5.3.5.1 Treatment instruments The procedures required for the following treatment instruments are described in the following separate operating instructions: List of treatment instruments, E motor, without implant and HF surgery ●
-
64 57 498 D3543 40 D3543.201.01.05.02 08.2016 3Unit description Sirona Dental Systems GmbH 3.9Dentist element Operating Instructions INTEGO 3.9.4 Standard EasyPad user interface 3.9.4.1 EasyPad display and status displays EasyPad display For indicating speed, intensity, and torque and for configuring and servicing the treatment center. Time, timer function, and error messages are also displayed. Status displays Indicate activation of spray (only for C + electronic foot switch), counterclockwise rotation, torque control, and user profile B. A EasyPad displa
-
64 57 498 D3543 194 D3543.201.01.05.02 08.2016 4Operation Sirona Dental Systems GmbH 4.14Configuration of the treatment center (setup) Operating Instructions INTEGO 4.14.1.4 Switching the key sound on/off A setting can be made to issue an acoustic signal when the operator presses a button on the dentist or assistant element. ✔ The setting focus Key tone flashes. 1. Change th
-
64 57 498 D3543 46 D3543.201.01.05.02 08.2016 3Unit description Sirona Dental Systems GmbH 3.10Assistant element Operating Instructions INTEGO 3.10 Assistant element The scope of functions of the assistant element is adapted to the dental assistant’s field of activity. The INTEGO treatment center and INTEGO pro with Ambidextrous option can be equipped with the Compact or Comfort assistant element. INTEGO pro without the Ambidextrous option is available only with the Comfort assistant element.
-
64 57 498 D3543 212 D3543.201.01.05.02 08.2016 5Care, cleaning and maintenance by the practice team Sirona Dental Systems GmbH 5.2Surfaces Operating Instructions INTEGO 5.2.5 Care for, clean, and disinfect upholstery Special care, cleaning, and disinfecting agents are recommended by Sirona for the care, cleaning, and disinfection of the upholstery. Care, cleaning, and disinfecting agents, reference The upholstery of the patient chair and the headrest can be spray and wipe disinfe
-
64 57 498 D3543 D3543.201.01.05.02 08.2016 81 Sirona Dental Systems GmbH 4Operation Operating Instructions INTEGO 4.5Dentist element båÖäáëÜ 4.5.2 Positioning the dentist element Dentist el ement on support a rm, collision, manual movement Dentist element, sudden movements The dentist element is attached to the water unit with a flexible support arm. The dentist element is held in place at the adjusted height with a pneumatic locking brake in the support arm. Push button on the CS, TS and Turn with the option dentist e lements With the CS den
-
64 57 498 D3543 196 D3543.201.01.05.02 08.2016 4Operation Sirona Dental Systems GmbH 4.14Configuration of the treatment center (setup) Operating Instructions INTEGO when the foot pedal is pressed down fully. The knob on the camera can still be used to focus the image. ✔ The setting focus Focusing by foot switch flashes. 1. Change the value with the favorite keys 1 or 3. If the focus setting is 1, the camera can be focused using the foot switch. 2. Confirm with the 2 / Setup favorite key. 4.14.1.12 Opening the service function T
-
64 57 498 D3543 308 D3543.201.01.05.02 08.2016 10Overview of all function keys Sirona Dental Systems GmbH 10.4Integrated torque control Operating Instructions INTEGO 10.4 Integrated torque control Integrated torque control Activation of the integrated torque control function Calibrating the burr drive A calibration must be performed each time you change or lubricate the contra-angle handpiece.
-
64 57 498 D3543 D3543.201.01.05.02 08.2016 309 Sirona Dental Systems GmbH 10Overview of all function keys Operating Instructions INTEGO 10.5Other dialogs båÖäáëÜ 10.5 Other dialogs 10.5.1 Timer screen Time loop If the key is highlighted orange, the countdown will automatically be restarted when the set time has expired. Acoustic signal If the key is highlighted orange, an acoustic signal will sound when the set t
-
64 57 498 D3543 120 D3543.201.01.05.02 08.2016 4Operation Sirona Dental Systems GmbH 4.5Dentist element Operating Instructions INTEGO 4.5.10 ApexLocator The ApexLocator is available only with the EasyTouch Comfort user interface. The ApexLocator can be used to measure the working length of the root canal file in endodontic treatments using electrical impedance. The ApexLocator can be used as follows: ● For manual measurement using a file clamp ● For measurement during treatment w
-
64 57 498 D3543 310 D3543.201.01.05.02 08.2016 10Overview of all function keys Sirona Dental Systems GmbH 10.5Other dialogs Operating Instructions INTEGO 10.5.5 Operating light setting program Sensor control for switching the operating light on/off If the key is highlighted orange, the operating light can be switched on/off or changed to the Composite function by a hand movement. Setting the brightness of the operating light Color temperature Setting the co
Questions, Opinions and Exploitation Impressions:
You can ask a question, express your opinion or share our experience of Sirona Intego device using right now.
5 docs – User Manuals, Help Guides and Specs – for the Dentsply Sirona Intego product are present in our data base.
Tips for Finding Manuals:
This web-page provides a list of 5 accessible operating manuals and information books describing Dentsply Sirona Intego.
All manuals and instructions for Dentsply Sirona Intego are introduced in an easy-to-use PDF format and may be gratuitously downloaded or looked through directly from the site.
The page offers the following types of manuals: Dental equipment, Medical Equipment.
Helpful hints: While selecting a necessary guide for Dentsply Sirona Intego one should pay special attention to the type of the document.
We try to supply you with the fullest possible set of papers we or our users are able to find. These may be overviews and specifications of the device, mounting and installing instructions, the unit operating rules and maintenance regulations and much more.
Haven’t found a required manual for your Dentsply Sirona Intego?
Check in a while. We update our guides collection and add new documents on a daily basis for you to be always able to find the very paper you need on our web-site. In case you own a directory or an instruction for Dentsply Sirona Intego, which is absent on our site, and you’d like to share it with the public, please send it to us as a scanned copy or a PDF file, and we’ll definitely place it on our page while providing your name as a supplier of the doc. Lots of our users will be grateful for your assistance!
Documents: Sirona Intego Dental equipment PDF User Manuals and Service Instructions (6 Sirona Intego Manuals found in DataBase)
Sirona Intego: List of Manuals
| # | Screen | Document Information | Share in Social |
|---|---|---|---|
| 1 |
|
Sirona Intego Brief operating instructions (36 pages) Sirona Intego 36 |
|
| 2 |
|
Sirona Intego Brief operating instructions (44 pages) Sirona Intego 44 |
|
| 3 |
|
Sirona Intego Operating instructions manual (280 pages) Sirona Intego 280 |
|
| 4 |
|
Sirona Intego Operating instructions manual (326 pages) Sirona Intego 326 |
|
| 5 |
|
Sirona Intego Service manual (162 pages) Sirona Intego 162 |
|
| 6 |
|
Sirona Intego Operator’s manual (18 pages) Sirona Intego 18 |
Dental equipment Appliance:
| # | Brand | Device Model | Type of Document | Pages | Size | Views | Downloads | Updated | SYS | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Air Techniques |
ProVecta 3D Prime |
Installation instructions manual |
44 | 837 | 160 | 10-04-2023 | prG.FTHD39dAk | ||
| 2 | KaVo |
SURGmatic S201 XL Pro |
User manual manual |
26 | 1386 | 333 | 21-02-2023 | prEDxVAlda4Po | ||
| 3 | Renfert |
MT plus |
Instruction manual |
142 | 618 | 155 | 22-07-2023 | pr6PXwMOelqmg | ||
| 4 | VDW |
SILVER RECIPROC |
Operating manual |
684 | 856 | 146 | 10-06-2023 | pr5dZb16d5QGg | ||
| 5 | Renfert |
SILENT TC |
Quick start manual |
88 | 937 | 235 | 17-02-2023 | prdg8LANl7fUw |
More Products:
- ORTHOPHOS SL 2D
- DAC UNIVERSAL
- PerioScan
- S2
- ORTHOPHOS XG 5
- DAC PROFESSIONAL
- sirolaser blue
- VDW 6:1
- HELIODENT DS
Related Instructions for Intego:
-
StarTech.com S2510U33RUSM Operation & User’s Manual
S2510U33RUSM (Enclosure ePDF User Manual, #O7T7JU)
S2510U33RUSM, 11
-
Makita 8413D Instruction Manual
Makita 8413D User Manual (Instruction manual), @C944J5
8413D, 24
-
Karbon Audio ODS65B Instruction Manual
ODS65B Instruction manual — U2358P
ODS65B, 3
-
Vibe NEXI8 Assembly Manual
Vibe NEXI8 Guide (Assembly manual), @FOQ84Q
NEXI8, 100
-
Johnson Controls 100 Series Engineering Manual
100 Series Engineering manual — K12UW2
100 Series, 102
-
Dual XDMA5280 Installation & Owner’s Manual
Dual XDMA5280 Manual (Installation & owner’s manual), @279IK8
XDMA5280, 28
-
Cal Spas Inground Series Owner’s Manual
Cal Spas Inground Series Manual (Owner’s manual), @636K7O
Inground Series, 40
-
Cisco ME 3400 Software Configuration Manual
#A1WWB8: ME 3400 Switch Software configuration manual
ME 3400, 1138
-
CAT TRD7412UBA Owner’s Manual
PDF User Guide (@SG4ANT), CAT TRD7412UBA Radio (04th Jul 2023)
TRD7412UBA, 20
-
Cory Everson 6000HT Owner’s Manual
#R91E5P: 6000HT Elliptical Trainer Owner’s manual
6000HT, 16
Categories of Sirona Devices:
Battery Pack
Plumbing Product
Measuring Instruments
Control Unit
Dental equipment
Medical Equipment
Food Saver
Laboratory Equipment
Radio
Scanner
Monitor
Media Converter
Lighting Equipment
Kitchen Appliances
Barcode Reader