Smoke factory tour hazer ii инструкция

1. Manuals
2. Brands
3. Smoke Factory Manuals
4. Fog Machine
5. Tour Hazer II
6. Manual

• Page 1
  See the Performance Introduction Manual Type: Tour Hazer II…

• Page 2: Table Of Contents

  Thank you for choosing a 4.2 Installing and Changing the Fluidbottle MOKE ACTORY DEVICE 4.3 Fogfluid 4.4 Power Connection of the Tour Hazer II 5 Operating Instructions The S product range MOKE ACTORY offers you a vast variety of complete 5.1 Controls of the Tour Hazer II…

• Page 3: Introduction

  Failure to properly follow these instructions may lead to a fire, explosion or electrical shock. Type: Tour Hazer II Scotty II Captain D Data II Factory Fan Spaceball-II…

• Page 4: Safety Instructions

  Safety Instructions Danger! Warning! Follow these instructions to avoid fire, explosions Don’t endanger yourself. Read the safety or electrical shocks. instructions thoroughly. 2.1 Danger of Burning Warning! Very hot steam escapes from the nozzle. There is a high danger of getting burnt The smoke machine must be placed at least 150 cm away from persons and heat-sensitive materials.

• Page 5
  FACTORY-fog generator. Scotty II or Fire Trainer? It doesn’t matter. You get the equipment that makes the difference. Fig. 1:Tour Hazer II – Front View 6: Mains supply Control panel for adjusting the DMX start address Fluid tube inlet and the output…
• Page 6
  3: Safety guard (Entrapped air fort he fan) 4: Air deflector (rotatable) 5: Connection area: Power, Controls, Medium 6: Canister case 7: Fluid can Fig. 2:Tour Hazer II — Isometric View Pin-Configuration: See page 11 Fig. 3:Tour Hazer II — Isometric View Canisterclosing with integrated sinter-filter…

• Page 7: Commissioning

  A „P“ and two figures appear on the LED display (for instance P 15). After approximately 60 sec. the Tour Hazer II is heated up and ready to be used. Press the Enter-button once (14) to start hazing. The green Active-LED (1) will light up.

• Page 8: Operating Instructions

  MOKE ACTORY is based upon your specific application. The Tour Hazer II is a real Touring Hazer. With its 1500 W it is a truly powerful smoke machine. Due to the digital technique it is possible, to generate tiny clouds as well as roomfilling fog.

• Page 9: Control System

  Fig. 9: Sufficiently cooled off. Within 60 sec after turning off the DMX-Signal the device starts the Backlash mode. Please ensure that the Tour Hazer II is not disconnected from the power supply too early. Otherwise the tubes and HE cannot be cleaned properly.

• Page 10: Adjusting The Dmx Start Address

  1% to 99%. 5.3.3 Standalone mode The Smoke Factory – Hazer II can be used in the standalone mode. In this mode all data for the pump and the fan must be adjusted directly at the machine.

• Page 11
  5.3.4 „Timer“ Haze-Density Control System (HDCS) Fig. 19: Adjusting the Pre-Runtime Fig. 20: Adjusting the pump value. Fig. 21: Startuing the profile Abb. 22: Exiting the profile With the HDCS it is possible to specify a certain user profile. Two levels (A and B) can be regulated, the haze time and wait time can be adjusted in minutes the pump and the fan output can be adjusted in percent.

• Page 12: Autostart

  „ESC“ on the display (Fig. 22) and press the Enter-button. 5.4 Autostart If the Timer is activated but the device disconnected from the mains supply, Tour Hazer II will start automatically in the Timer Mode with the pre-adjusted values as soon as it is reconnected…

• Page 13: Maintenance

  6. Maintenance Avoid overheating of the smoke machine by high operating temperatures. Don’t let spotlights directly shine on the device. Do not let the smoke machine run without any fluid as the pump will run dry. Some droplets of condensation will form at the nozzle. That is normal and not a malfunction. Remove the fluid droplets as they can destroy the electronics.

• Page 14: Trouble-Shooting

  7. Trouble-Shooting The Tour Hazer II does not produce any haze Check the external control Check the power supply Check, if there is enough fluid in the canister Check if the connection is permeable Check if fluid tube is unclean…

• Page 15: Technical Specifications

  5° C to +45 ° C Dimensions (WxHxL) 533 mm x 248 mm x 442 mm Weight w/o fluid Approximately 18 kg Accessories Radio remote and cable remote control Scope of delivery Tour Hazer II, instruction manual, canister lid for 5 litre can, power connection…

• Page 16: Warranty Conditions

  9. Warranty Conditions Effective only for the Federal Republic of Germany grants you warranty for the “Tour Hazer II“ according to the following conditions MOKE ACTORY Free of charge, subject to the following conditions (No. 2 — 6) we will repair any defect or fault in the unit if it is caused by a proven factory fault and has been advised immediately after appearance and within 6 months of delivery to the end user.

• Page 17: Services

  10.Service See the Performance We advise you We help you We provide you with information material fast und reliably Service and Contact Fog, Smoke & Haze Factory GmbH Walsroder Str. 159 A D-30853 Langenhagen/Hannover Tel.: ++49 (0) 511 — 51 51 02 — 0 Fax: ++49 (0) 511 — 51 51 02 –…

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17