Tp link tl sf1009p инструкция

Посмотреть инструкция для TP-Link TL-SF1009P бесплатно. Руководство относится к категории переключатели, 1 человек(а) дали ему среднюю оценку 7.5. Руководство доступно на следующих языках: английский. У вас есть вопрос о TP-Link TL-SF1009P или вам нужна помощь? Задайте свой вопрос здесь

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о TP-Link TL-SF1009P.

Не нашли свой вопрос? Задайте свой вопрос здесь

Installation Guide

Connection

Unmanaged Desktop PoE/PoE+ Switch

PC

IP Camera AP

Ethernet Ports (1-8)

PoE Ports (1-4)

IP Phone

PoE Devices

1. PoE ports can also connect to non-PoE devices, but only transmit data.

Note:

2. TL-SL1311MP has three uplink ports, which typically connect to uplink devices like routers.

Uplink 1 is an SFP slot and works with a 1000 Mbps SFP module. Uplink 2 and uplink 3 are RJ45 ports.

Internet

Link/Act

On: Link present but no activity

Flashing: Transmitting/receiving data

O: No link

PoE Status

On: PoE power provided

Flashing: Current-overload/ Short-circuit

O: No PoE power provided

Power

On: Power on

O: Power o

© 2020 TP-Link 7106509076 REV7.1.0

LED Explanation

DC Power Adapter

AC Power Cord

Switches Explanation

Note: For simplicity, we will take TL-SF1008P for example throughout the Guide.

O: Ports run at 10/100 Mbps and support PoE power supply up to 100 m away.

On: Ports run at 10 Mbps and support PoE power supply up to 250 m away.

Extend (for TL-SF1008LP/TL-SF1008P/TL-SF1009P/TL-SL1311MP)

PoE MAX

TL-SF1008LP

On: 34 W ≤ Total power supply < 41 W

Flashing: Total power supply = 41 W

O: Total power supply < 34 W

TL-SF1008P

On: 59 W ≤ Total power supply < 66 W

Flashing: Total power supply = 66 W

O: Total power supply < 59 W

TL-SF1009P

On: 58 W ≤ Total power supply < 65 W

Flashing: Total power supply = 65 W

O: Total power supply < 58 W

TL-SL1311MP

On: 117 W ≤ Total power supply < 124 W

Flashing: Total power supply = 124 W

O: Total power supply < 117 W

O: The PoE Auto Recovery function is disabled.

On: The switch will constantly detect the working status of a PoE powered device (PD). When

the switch nds that the PD works abnormally, the switch will reboot it.

Recovery (only for TL-SF1008P/TL-SL1311MP)

O: Ports can transmit data with each other.

On: Specc ports cannot transmit data with other downlink ports. They can transmit data

only with the uplink ports.

Isolation (only for TL-SF1009P/TL-SL1311MP)

O: All the ports transmit data with the same priority.

On: The specic ports transmit data with a higher priority than other ports.

Priority (only for TL-SF1008LP/TL-SF1008P/TL-SF1009P)

Note: The numbers in brackets indicate the ports where the feature takes eect. For example, when Extend(1-4) is toggled to On, the Extend mode will be enabled for ports 1-4.

Frequently Asked Questions (FAQ)

The Power LED should be lit when the power system is working normally. If the Power LED is

not lit, please check as follows:

A1:

Make sure the AC power cord is connected the switch with power source properly.

A2:

Make sure the voltage of the power supply meets the requirements of the input voltage

of the switch.

A3:

Make sure the power source is on.

Q1. The Power LED is not lit.

It is recommended that you check the following items:

A1:

Make sure that the cable connectors are rmly plugged into the switch and the device.

A2:

Make sure the connected device is turned on and working well.

A3:

The cable must be less than 100 meters long (328 feet). If Extend Mode is enabled, it

should be less than 250 meters (820 feet).

Q2. The Link/Act LED is not lit when a device is connected to the

corresponding port.

When the total power consumption of connected PoE devices exceeds the maximum, the

PoE port with a smaller port number has a higher priority. The system will cut o power to

the ports with larger port numbers to ensure supplying to other ports.

Take TL-SF1008P as an example. If port 1, 2 and 4 are consuming 15.4 W respectively, and

an additional PoE device with 20 W is inserted to port 3, the system will cut o the power of

port 4 to compensate for the overload.

Q3. Why are PoE ports not supplying power for PoE devices?

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides, welcome

to email techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit https://community.tp-link.com to join TP-Link

Community.

TP-Link hereby declares that the device is in compliance with the essential requirements and

other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU

and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

EU Declaration of Conformity

PoE Disclaimer

The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission

distance may vary due to power consumption of PoE-powered devices or the cable quality

and type.

PoE budget calculations are based on laboratory testing. Actual PoE power budget is not

guaranteed and will vary as a result of client limitations and environmental factors.

General Specications

Specications

IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3af,

IEEE802.3at (Except TL-SF1008LP),

IEEE802.3ab (Only for TL-SL1311MP)

IEEE802.3z (Only for TL-SL1311MP)

CSMA/CD

TL-SF1008LP/TL-SF1008P:

8 10/100 Mbps RJ45 Ports Auto-Negotiation/Auto MDI/MDIX

PoE Ports: Port 1–4

TL-SF1009P:

9 10/100 Mbps RJ45 Ports Auto-Negotiation/Auto MDI/MDIX

PoE Ports: Port 1–8

TL-SL1311MP:

8 10/100 Mbps RJ45 Ports Auto-Negotiation/Auto MDI/MDIX

2 10/100/1000 Mbps RJ45 Ports Auto-Negotiation/Auto

MDI/MDIX

1 1000 Mbps SFP slot

PoE Ports: Port 1–8

10BASE-T:

UTP category 3, 4, 5 cable (maximum 100 m)

EIA/TIA-568 100

Ω

STP (maximum 100 m)

100BASE-TX:

UTP category 5, 5e cable (maximum 100 m)

EIA/TIA-568 100

Ω

STP (maximum 100 m)

1000BASE-T (Only for TL-SL1311MP):

UPT category 5e cable or above (maximum 100m)

EIA/TIA-568 100

Ω

STP (maximum 100 m)

1000BASE-SX/LX/LX10/BX10 (Only for TL-SL1311MP):

MMF, SMF

TL-SF1008LP/TL-SF1008P: 1.6 Gbps

TL-SF1009P: 1.8 Gbps

TL-SL1311MP: 7.6 Gbps

2K

Store-and-Forward

Automatically learning, automatically aging

External Power Adapter

Input: 100-240 VAC, 50/60 Hz

Output:

TL-SF1008LP: 53.5 VDC/0.81 A

TL-SF1008P/TL-SF1009P: 53.5 VDC/1.31 A

TL-SL1311MP: 53.5 VDC/2.43A

TL-SF1008LP: 41 W (up to 15.4 W for each PoE port)

TL-SF1008P: 66 W (up to 30 W for each PoE port)

TL-SF1009P: 65 W (up to 30 W for each PoE port)

TL-SL1311MP: 124 W (up to 30 W for each PoE port)

Ye s

TL-SF1008LP/TL-SF1008P/TL-SF1009P: 105 mm

TL-SL1311MP: 150 mm

Standard

Wall Mountable

Distance Between

Mounting Holes

Network Media (Cable)

MAC Address Table

Interface

Switching Capacity

Protocol

Power Supply

Transfer Method

MAC Address Learning

Safety Information

Keep the device away from water, re, humidity or hot environments.

Do not attempt to disassemble, repair, or modify the device. If you need service, please

contact us.

Do not use damaged charger or USB cable to charge the device.

Do not use any other chargers than those recommended.

Adapter shall be installed near the equipment and shall be easily accessible.

The plug on the power supply cord is used as the disconnect device, the socket-outlet

shall be easily accessible.

PoE Budget

A1:

Before upgrading a connected PoE powered device (PD), disable PoE Auto Recovery to

avoid the PD’s damage.

A2:

When a PD does not send data packets to the switch for a long period in certain

scenarios (e.g. an IPC in sleep mode), disable PoE Auto Recovery to avoid the PD

repeatedly rebooting.

Q4. What should I notice before using the PoE Auto Recovery

feature?

Смотреть руководство для TP-Link TL-SF1009P ниже. Все руководства на ManualsCat.com могут просматриваться абсолютно бесплатно. Нажав кнопку «Выбор языка» вы можете изменить язык руководства, которое хотите просмотреть.

Бренд:

TP-Link

Продукт:

переключатели

Модель/название:

TL-SF1009P

Тип файла:

PDF

Доступные языки:

английский

Сопутствующие товары TP-Link TL-SF1009P