Yamaha ax 592 инструкция на русском

• Page 1
  AX-492/592/892 Natural Sound Stereo Amplifier Amplificateur stéréo de la série “Natural Sound” Thank you for selecting this YAMAHA stereo amplifier. Nous vous remercions d’avoir porté votre choix sur cet amplificateur stéréo YAMAHA. OWNER’S MANUAL MODE D’EMPLOI…

• Page 2: Safety Instructions

  SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage”…

• Page 3
  This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.

• Page 4: Table Of Contents

  Supplied accessories …4 Connections …6 Controls and their functions …12 Remote control …14 Basic operations …16 Troubleshooting …20 Specifications …21 Supplied accessories Remote Control Transmitter YAMAHA HiFi SYSTEM REMOTE CONTROL TRANSMITTER DIR A DIR B REC/PAUSE PLAY TAPE 2 TAPE 1 TUNER…

• Page 5
  CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. To assure the finest performance, please read this manual carefully and keep it in a safe place for future use. Install this unit in a cool, dry and dust-free area. Do not place it in direct sunlight or near sources of heat (e.g., a stove, etc.).

• Page 6: Connections

  Properly connect this unit and other components, L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual of each component which is to be connected to this unit. If you have YAMAHA components numbered output (input) terminals of each component to the same-numbered terminals on this unit.

• Page 7: Connections Ax-592

  AX-592 Turntable Tape deck 1 PHONO COUPLER MAIN TAPE TAPE TUNER TAPE 1 TAPE 2 (MD) PHONO REMOTE CONTROL Compact disc player * For descriptions of the shaded areas, refer to page 10. Tape deck 2 SPEAKERS CAUTION SEE INSTRUCTION MANUAL FOR CONNECT SETTING Tuner Video cassette player, LD player, etc.

• Page 8
  AX-892 Turntable COUPLER PHONO MAIN TAPE TAPE TUNER TAPE 1 TAPE 2 (MD) Compact disc player * For descriptions of the shaded areas, refer to page 10. Tape deck 1 Tape deck 2 SPEAKERS CAUTION SEE INSTRUCTION MANUAL FOR CONNECT SETTING REMOTE CONTROL PHONO…

• Page 9: Connecting Speakers

  CONNECTING SPEAKERS Connect the SPEAKERS terminals to your speakers with cable of the proper gauge, cut as short as possible. If the speakers are improperly connected, no sound will be heard. Connect each speaker making sure that the polarity (+ and –) is correct. Red: positive (+) Black: negative (–) If the cables are reversed, the sound will be unnatural and will…

• Page 10
  REMOTE CONTROL (PHONO) connector AX-592 and AX-892 only If you have a YAMAHA turntable with a terminal for remote control, connect it to this connector using the cable provided with the turntable. This connection allows you to control the turntable with the remote control.

• Page 11: Impedance Selector Switch

  IMPEDANCE SELECTOR switch Make sure that the power to the unit is off, before you set the switch. Select the appropriate setting for your speaker system. Upper position 4 Ω: If you use either speaker system A or B, the impedance of each speaker must be 4 Ω, or higher.

• Page 12: Controls And Their Functions

  CONTROLS AND THEIR FUNCTIONS FRONT PANEL AX-492 NATURAL SOUND STEREO AMPLIFIER AX-492 POWER – 5 PHONES SPEAKERS AX-592 NATURAL SOUND STEREO AMPLIFIER AX-592 POWER – 5 PHONES SPEAKERS FLAT -30db – 5 BASS TREBLE BALANCE LOUDNESS FLAT -30db – 5 SUBSONIC BASS TREBLE…

• Page 13: Play

  AX-892 NATURAL SOUND STEREO AMPLIFIER AX-892 POWER – 5 BASS SPEAKERS PHONES Remote control sensor Receives signals from the remote control. POWER switch Press this switch to turn the power on and off. When the power is on, the indicator will be illuminated. *Standby mode <Except for U.S.A.

• Page 14: Remote Control

  The remote control provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player, tuner, turntable and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this remote control will also control the various functions of those components.

• Page 15
  Battery installation Battery replacement If you find that the remote control must be used closer to the unit, the batteries are weak. Replace both batteries with new ones. Note Use only AA, R6, UM-3 batteries for replacement. Be sure the polarities are correct. (See the illustration inside the battery compartment.) Remove the batteries if the remote control will not be used for an extended period of time.

• Page 16: Basic Operations

  POWER PHONES * The AX-492 does not have a SUBSONIC FILTER and MUTING switch. * The AX-592 does not have a MUTING switch. PLAYING A SOURCE ∞ Turn the control to “ ”. VOLUME Turn the power on. POWER Select the desired input source. INPUT TAPE 1 TAPE 2…

• Page 17
  NATURAL SOUND STEREO AMPLIFIER AX-892 POWER PHONES SPEAKERS * The AX-492 does not have a SUBSONIC FILTER and MUTING switch. * The AX-592 does not have a MUTING switch. RECORDING A SOURCE TO A TAPE (OR DUBBING FROM TAPE TO TAPE) Select the source to be recorded.

• Page 18: Selecting The Speaker System

  Adjusting the BALANCE control Adjusts the balance of the output volume to the left and right speakers to compensate for channel imbalance caused by speaker location or listening room conditions. BALANCE Adjusting the BASS and TREBLE controls BASS Turn this control clockwise to increase (or counterclockwise to decrease) the low-frequency response.

• Page 19
  Using the PURE DIRECT switch You can enjoy the purest possible sound from your sources by setting this switch so that the indicator illuminates. The signals bypass the BASS, TREBLE, BALANCE and LOUDNESS controls, the SUBSONIC FILTER switch ( AX-592 and AX-892 only ), and the PRE OUT/MAIN IN terminals ( AX-592 and AX- 892 only ), eliminating any alterations to the signals.

• Page 20: Troubleshooting

  If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the AC power plug and contact your authorized YAMAHA dealer or service center for help. SYMPTOM…

• Page 21: Specifications

  SPECIFICATIONS (AX-492) AUDIO SECTION Minimum RMS Output Power per Channel 8 ohms, 20 Hz to 20 kHz, 0.019% THD …85W+85W 6 ohms, 20 Hz to 20 kHz, 0.038% THD …100W+100W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) 8/6/4/2 ohms …130/150/185/220W DIN Standard Output Power per Channel [Europe model only]…

• Page 22: Specifications Ax-592

  SPECIFICATIONS (AX-592) AUDIO SECTION Minimum RMS Output Power per Channel 8 ohms, 20 Hz to 20 kHz, 0.015% THD …100W+100W 6 ohms, 20 Hz to 20 kHz, 0.03% THD …120W+120W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) 8/6/4/2 ohms …140/170/220/290W DIN Standard Output Power per Channel [Europe model only]…

• Page 23: Specifications Ax-892

  SPECIFICATIONS (AX-892) AUDIO SECTION Minimum RMS Output Power per Channel 8 ohms, 20 Hz to 20 kHz, 0.015% THD …115W+115W 6 ohms, 20 Hz to 20 kHz, 0.03% THD …140W+140W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) 8/6/4/2 ohms …150/200/250/330W DIN Standard Output Power per Channel [Europe model only]…

• Page 24: Caracteristiques Techniques Ax-892

  YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA Niveau de sortie/impédance…

инструкцияYamaha AX-592

Посмотреть инструкция для Yamaha AX-592 бесплатно. Руководство относится к категории приемники, 2 человек(а) дали ему среднюю оценку 8.4. Руководство доступно на следующих языках: английский. У вас есть вопрос о Yamaha AX-592 или вам нужна помощь? Задайте свой вопрос здесь

• Supplied accessories
• CONNECTIONS
• CONTROLS AND THEIR FUNCTIONS
• REMOTE CONTROL
• BASIC OPERATIONS
• TROUBLESHOOTING
• SPECIFICATIONS

Главная

Не можете найти ответ на свой вопрос в руководстве? Вы можете найти ответ на свой вопрос ниже, в разделе часто задаваемых вопросов о Yamaha AX-592.

Не нашли свой вопрос? Задайте свой вопрос здесь

Производители

Altec

Billy Goat

Bonavita

Haicom

Jwin

React

Rosen Entertainment Systems

Russell Hobbs

The New Yorker Store

Типы устройств

Портативные устройства хранения данных

Электронные книги

Системы дистанционного запуска

Кромкорезы

Мелкая бытовая техника

Аккумуляторные терки Gizmo

Мебель для маленьких детей

Программное обеспечение RVI

Flash-память

Машины с очень простыми функциями

Устройства

AEG FAVORIT 40360 I

Bionaire BAP9700S

Blackberry PRD-12528-103

Bose Lifestyle 18 Series II system

Bryant Air Conditioner 552A

Cabletron Systems 2H33-37R

GE Monogram ZIC360NXLH

JVC GR-D248

SMSC USB2512A

freeuserguide.ru
About Us
Contacts
Disclamers
Privacy Policy