ZoneFlex R300 802.11n
Multimedia Wi-Fi Access Point
Quick Setup Guide
This Quick Setup Guide provides step-by-step instructions
on how to set up your Ruckus Wireless ZoneFlex Access
Point. After completing the steps described in this Guide,
you will be able to place the Access Point (AP) at your site
and provide wireless network access to users.
The ZoneFlex R300 requires a minimum of Zone-
NOTE:
Flex firmware version 9.7 and above to operate.
T
G
O
L
HIS
UIDE IN
THER
ANGUAGES
请从以下网站获得该指南的简体中文版
https://support.ruckuswireless.com.
Vous trouverez la version française de ce guide à l’adresse
suivante https://support.ruckuswireless.com.
こ の ガ イ ド の⽇本語版は
https://support.ruckuswireless.com
で ご 覧 く だ さ い。
이 가이드의 한국어 버전은 웹 사이트
(https://support.ruckuswireless.com) 에서 확인하시기 바랍니다 .
Veja a versão em português (Brasil) deste guia em
https://support.ruckuswireless.com.
Puede ver la versión en español (América Latina) de esta guía en
https://support.ruckuswireless.com.
B
Y
B
EFORE
OU
EGIN
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
•
User Guides and Release Notes are available at
http://support.ruckuswireless.com/documents
•
Software Upgrades are available at
http://support.ruckuswireless.com/software
•
Open Source information is available at
http://opensource.ruckuswireless.com
•
Software License and Limited Warranty available at
http://support.ruckuswireless.com/warranty
P
ACKAGE
•
ZoneFlex R300 Access Point
•
Mounting screws and anchors (2)
•
Security screw
•
Pin removal tool
•
Regulatory flyer
•
This Quick Setup Guide
S
R
ETUP
EQUIREMENTS
•
A computer running Windows 7 (procedures for other OS’s
are similar)
•
One or more of the following:
•
A modem (DSL or cable), broadband router, or other
device provided by your Internet Service Provider
that brings Internet access to your site.
•
A network switch or a DSL/Internet gateway device.
•
Two Cat 5e Ethernet cables
•
An AC power adapter (sold separately), or
•
An 802.3af or 802.3at -compliant Power over Ethernet (PoE)
switch or PoE injector
IMPORTANT!
If the AP is deployed with a ZoneDirector, follow the
ZoneDirector Quick Setup Guide, and connect the AP to your
local network.
S
1: C
TEP
1
After removing your Ruckus Wireless AP from its package,
.
place it next to your computer.
2
Using an Ethernet cable, connect your computer’s network
.
port to the 10/100/1000 port on the AP.
3
Using the AC adapter (sold separately), connect the AP to a
.
convenient (and protected) power source.
•
Alternatively, connect the 10/100/1000 port to a PoE
.
injector or PoE switch for both power and network
connectivity.
Published June 2013, Part Number 800-70507-001 Rev B
C
ONTENTS
AP
Y
C
ONNECT THE
TO
OUR
OMPUTER
Copyright © 2013 Ruckus Wireless, Inc.
4
Verify that the Power LED on the external enclosure is a
steady green.
S
2: P
Y
C
TEP
REPARE
OUR
OMPUTER FOR
S
ETUP
NOTE:
The following procedures assume Windows 7 as the operating
system. Procedures for other OS’s are similar.
1
On your Windows 7 computer, configure your network
adapter from the Local Area Connection settings as follows:
•
Start > Control Panel > Network and Sharing
Center > Change Adapter Settings
2
Edit the TCP/IPv4 address settings as follows:
•
Local Area Connection > Properties > Internet
Protocol Version 4 (TCP/IPv4) > Properties
The TCP/IPv4 Properties dialog box appears.
3
Use the following IP address
Select
selected) and then make the following entries:
IP address
•
: 192.168.0.22 (or any address in the
192.168.0.x network)
•
Subnet mask
: 255.255.255.0
•
Default gateway
: 192.168.0.1
Leave the
DNS server
fields empty.
OK
4
Click
to save your changes.
Your changes are put into effect immediately.
S
3: L
I
AP
TEP
OG
NTO THE
As specified earlier, the AP should be directly connected to
your computer (through the Ethernet port) and powered on,
ready for setup.
1
On your computer, open a Web browser window.
2
In the browser, type this URL to connect to the AP:
https://192.168.0.1
AP
(if it is not already
3
Press <Enter> to initiate the connection. When a security
OK/Yes
alert dialog box appears, click
4
When the Ruckus Wireless Admin login page appears, enter
the following:
•
Username
: super
•
Password
: sp-admin
5
Login
Click
.
S
4: C
W
TEP
USTOMIZE THE
IRELESS
1
Configuration
On the Web interface menu, click
less [2.4G/5G]
. The Configure :: Wireless :: Common
options appear.
2
Verify that the following options are active:
•
Channel
: SmartSelect
•
Country Code
: If you are not located in the United
States, select your current country.
3
Update Settings
Click
if you made any changes.
4
Click any of the eight «Wireless #» tabs at the top of the
page.
Enabled
5
In Wireless Availability, click
SSID
6
Delete the text in the
field, and then type a name for
your network that will help your users identify the AP in their
wireless network connection application.
Update Settings
7
Click
to save your changes.
8
Repeat Steps 4-7 for each Wireless # interface that you want
to enable.
9
Logout
Click
to exit the Web interface.
10
Disconnect the AP from the computer and from the current
power source, and then restore your computer to its original
network connection configuration.
S
5: P
AP
Y
TEP
LACE THE
IN
OUR
1
Move the AP to its permanent location (accessible to both
AC power and network connection).
2
Use an Ethernet cable to connect the 10/100/1000 port of
the AP to your network.
If you will be using PoE, you will need a Cat 5e (or
NOTE:
better) Ethernet cable to connect the AP to the PoE injec-
tor or switch.
3
Connect the AC power adapter (or PoE power supply) to the
AP, then to a convenient power source.
4
Verify that the 10/100/1000 port LED is lit.
S
6: V
TEP
to proceed.
1
Using any wireless-enabled computer or mobile device,
search for and select the wireless network you previously
configured.
2
If you can connect, open a browser and link to any public
Web site.
Congratulations! Your wireless network is active and ready
for use. If you need to configure advanced wireless settings,
S
such as enabling security, see the ZoneFlex AP User Guide.
ETTINGS
Wire-
>
(O
PTIONAL
The ZoneFlex R300 can be mounted to a wall, ceiling or to a
T-bar using the supplied mounting screws or the T-bar clips
built into the bottom of the AP enclosure.
Mounting to a Flat Surface
1
Use this Quick Start Guide template to mark the locations
for screw holes on the mounting surface. Use a 5mm drill bit
to drill approximately 25mm into the mounting surface.
2
Insert the anchors and mounting screws into the mounting
.
surface, leaving approximately 1/4″ (6 mm) of the screw
heads protruding for the AP enclosure.
The screws should be approximately 3.25″ (82.6mm) apart
per the template.
3
Insert the unit removal pin into the hole on the side of the
Figure 1.
AP (
Figure 1. Insert the unit removal pin into the pinhole
S
ITE
Hold unit removal pin
in while mounting
4
Place the AP onto the mounting screws so that the screw
heads enter the mounting holes on the AP enclosure, and
push the AP (to the left or down depending on orientation)
to lock in place.
5
Remove the unit removal pin to release the lock mechanism
and secure the AP.
Published October 2013, Part Number 800-70507-001 Rev C
I
ERIFY THE
NSTALLATION
) M
I
OUNTING
NSTRUCTIONS
), to release the locking mechanism.
Copyright © 2013 Ruckus Wireless, Inc.
6
To unmount, insert the unit removal pin into the hole on the
side of the AP to unlock, then push the AP (to the right or up,
depending on orientation) to release the AP enclosure from
the mounting screws.
Mounting to a T-Bar
1
Orient the AP so that the T-bar is positioned between the T-
Figure 2.
bar clips as shown in
, then rotate the AP until the
third T-bar clip catches the T-bar and the latch locks the T-bar
in place (
Figure 3.
).
Figure 2.
Figure 3.
Security screw hole
2
For added physical security, use a Torx screwdriver to insert
the security screw into the hole shown in Figure 3.
3
To remove the unit, first remove the security screw, then
depress the latch while rotating the AP so that the T-bar clips
disengage the T-bar.
F
M
I
OR
ORE
NFORMATION
For information on how to configure the AP from the Web
interface, refer to the Ruckus Wireless ZoneFlex Access Point
User Guide or the Online Help, available from within the
Web interface.
-
Подключить точку доступа к электропитанию. Подключить патч-корд к компьютеру и к точке доступа.
-
На компьютере в сетевых настройках установить IP-адрес проводного интерфейса (Подключение по локальной сети/Ethernet) 192.168.0.10 и маску подсети 255.255.255.0
-
В веб-браузере ввести 192.168.0.1 и выполнить вход на точку доступа с именем пользователя super и паролем sp-admin.
-
В левом столбце выбрать подпункт Internet в пункте Configuration. Ввести параметры подключения к Интернету, полученные от провайдера. Нажать на кнопку Update Settings. Доступны варианты статического и динамического IP-адреса, PPPoE и L2TP.
Если при дальнейшем подключении кабеля провайдера Интернет не появился – возможно у провайдера сохранен физический адрес сетевого интерфейса (MAC) предыдущего роутера. Необходимо выяснить это в технической поддержке провайдера.
-
В левом столбце выбрать подпункт Local Subnets в пункте Configuration. В первой вкладке Local Subnet 1 установить следующие параметры:
- Subnet – Enable
- DHCP Server – Enable
- Starting Address – такой же как и Local IP: xxx.xxx.xxx.2
- Maximum DHCP Users – количество устройств в сети. 100, например.
- Access VLAN – 1
Нажать на кнопку Update Settings.
-
В левом столбце выбрать подпункт Radio 2.4G в пункте Configuration. Во второй вкладке настроить следующие параметры:
- Wireless Availability – Enabled
- Broadcast SSID – Enabled
- SSID – ввести название беспроводной сети в диапазоне 2.4 ГГц
- Packet Forward – Local Subnet NAT and Route to WAN
- Local Subnet – Local Subnet 1
- Insert DHCP option 82? – Enabled
- Client Fingerprinting – Enabled
- Encryption Method – WPA
- WPA Version – WPA2
- WPA Authentication – PSK
- WPA Algorithm – AES
- Passphrase – ввести ключ шифрования беспроводной сети
Нажать на кнопку Update Settings.
-
В левом столбце выбрать подпункт Radio 5G в пункте Configuration. Повторить предыдущие настройки для беспроводной сети в диапазоне 5 ГГц.
-
В левом столбце выбрать подпункт Ethernet Ports в пункте Configuration.
!!! ВНИМАНИЕ !!! Разместить точку доступа перед собой как показано на изображении. Определить в какой из портов необходимо будет подключить провод провайдера. В данном примере это PORT2. Для него настроить:
- Enable – Access Port
- Packet Forward – Bridge to WAN
- 802.1X – Disabled
- Insert DHCP option 82 – Enabled
- Client Fingerprinting – Enabled
Чтобы использовать остальные порты точки доступа для объединения домашних устройств в локальную сеть с выходом в Интернет, необходимо выполнить настройку:
- Enable – Access Port
- Packet Forward – Local Subnet NAT and Route to WAN
- 802.1X – Disabled
- Insert DHCP option 82 – Enabled
- Client Fingerprinting – Enabled
Нажать на кнопку Update Settings.
Наслаждаться лучшим Wi-Fi от Ruckus Wireless
Copyright © 2013 Ruckus Wireless, Inc.
Published June 2013, Part Number 800-70507-001 Rev B
ZoneFlex R300 802.11n
Multimedia Wi-Fi Access Point
Quick Setup Guide
This Quick Setup Guide provides step-by-step instructions
on how to set up your Ruckus Wireless ZoneFlex Access
Point. After completing the steps described in this Guide,
you will be able to place the Access Point (AP) at your site
and provide wireless network access to users.
THIS GUIDE IN OTHER LANGUAGES
请从以下网站获得该指南的简体中文版
https://support.ruckuswireless.com
.
Vous trouverez la version française de ce guide à l’adresse
suivante https://support.ruckuswireless.com
.
こ の ガ イ ド の⽇本語版 は https://support.ruckuswireless.com
でご覧く ださい。
이 가이드의 한국어 버전은 웹 사이트
(https://support.ruckuswireless.com
) 에서 확인하시기 바랍니다 .
Veja a versão em português (Brasil) deste guia em
https://support.ruckuswireless.com.
Puede ver la versión en español (América Latina) de esta guía en
https://support.ruckuswireless.com.
BEFORE YOU BEGIN
Before deploying Ruckus Wireless products, please check for
the latest software and the release documentation.
• User Guides and Release Notes are available at
http://support.ruckuswireless.com/documents.
• Software Upgrades are available at
http://support.ruckuswireless.com/software.
• Open Source information is available at
http://opensource.ruckuswireless.com.
• Software License and Limited Warranty available at
http://support.ruckuswireless.com/warranty.
PACKAGE CONTENTS
• ZoneFlex R300 Access Point
• Mounting screws and anchors (2)
• Security screw
• Pin removal tool
• Regulatory flyer
•This Quick Setup Guide
SETUP REQUIREMENTS
• A computer running Windows 7 (procedures for other OS’s
are similar)
• One or more of the following:
• A modem (DSL or cable), broadband router, or other
device provided by your Internet Service Provider
that brings Internet access to your site.
• A network switch or a DSL/Internet gateway device.
• Two Cat 5e Ethernet cables
• An AC power adapter (sold separately), or
• An 802.3af or 802.3at -compliant Power over Ethernet (PoE)
switch or PoE injector
STEP 1: CONNECT THE AP TO YOUR COMPUTER
1 After removing your Ruckus Wireless AP from its package,
place it next to your computer.
2 Using an Ethernet cable, connect your computer’s network
port to the 10/100/1000 port on the AP.
3 Using the AC adapter (sold separately), connect the AP to a
convenient (and protected) power source.
• Alternatively, connect the 10/100/1000 port to a PoE
injector or PoE switch for both power and network
connectivity.
4
Verify that the Power LED on the external enclosure is a
steady green.
STEP 2: PREPARE YOUR COMPUTER FOR AP
S
ETUP
1 On your Windows 7 computer, configure your network
adapter from the Local Area Connection settings as follows:
• Start > Control Panel > Network and Sharing
Center > Change Adapter Settings
2 Edit the TCP/IPv4 address settings as follows:
• Local Area Connection > Properties > Internet
Protocol Version 4 (TCP/IPv4) > Properties
The TCP/IPv4 Properties dialog box appears.
3
Select Use the following IP address (if it is not already
selected) and then make the following entries:
• IP address: 192.168.0.22 (or any address in the
192.168.0.x network)
•
Subnet mask: 255.255.255.0
•
Default gateway: 192.168.0.1
Leave the
DNS server fields empty.
4
Click OK to save your changes.
Your changes are put into effect immediately.
STEP 3: LOG INTO THE AP
As specified earlier, the AP should be directly connected to
your computer (through the Ethernet port) and powered on,
ready for setup.
1
On your computer, open a Web browser window.
2 In the browser, type this URL to connect to the AP:
https://192.168.0.1
NOTE: The ZoneFlex R300 requires a minimum of Zone-
Flex firmware version 9.7 and above to operate.
IMPORTANT!
If the AP is deployed with a ZoneDirector, follow the
ZoneDirector Quick Setup Guide, and connect the AP to your
local network.
NOTE:
The following procedures assume Windows 7 as the operating
system. Procedures for other OS’s are similar.
Copyright © 2013 Ruckus Wireless, Inc.
Published June 2013, Part Number 800-70507-001 Rev B
M
NTING TEMPLATE
3 Press <Enter> to initiate the connection. When a security
alert dialog box appears, click
OK/Yes to proceed.
4 When the Ruckus Wireless Admin login page appears, enter
the following:
• Username: super
•
Password: sp-admin
5
Click Login.
STEP 4: CUSTOMIZE THE WIRELESS SETTINGS
1 On the Web interface menu, click Configuration > Wire-
less [2.4G/5G]. The Configure :: Wireless :: Common
options appear.
2 Verify that the following options are active:
• Channel: SmartSelect
•
Country Code: If you are not located in the United
States, select your current country.
3
Click Update Settings if you made any changes.
4 Click any of the eight “Wireless #” tabs at the top of the
page.
5 In Wireless Availability, click Enabled.
6 Delete the text in the SSID field, and then type a name for
your network that will help your users identify the AP in their
wireless network connection application.
7 Click Update Settings to save your changes.
8 Repeat Steps 4-7 for each Wireless # interface that you want
to enable.
9 Click Logout to exit the Web interface.
10 Disconnect the AP from the computer and from the current
power source, and then restore your computer to its original
network connection configuration.
STEP 5: PLACE THE AP IN YOUR SITE
1 Move the AP to its permanent location (accessible to both
AC power and network connection).
2 Use an Ethernet cable to connect the 10/100/1000 port of
the AP to your network.
3 Connect the AC power adapter (or PoE power supply) to the
AP, then to a convenient power source.
4 Verify that the 10/100/1000 port LED is lit.
STEP 6: VERIFY THE INSTALLATION
1 Using any wireless-enabled computer or mobile device,
search for and select the wireless network you previously
configured.
2 If you can connect, open a browser and link to any public
Web site.
Congratulations! Your wireless network is active and ready
for use. If you need to configure advanced wireless settings,
such as enabling security, see the ZoneFlex AP User Guide.
(OPTIONAL) MOUNTING INSTRUCTIONS
The ZoneFlex R300 can be mounted to a wall, ceiling or to a
T-bar using the supplied mounting screws or the T-bar clips
built into the bottom of the AP enclosure.
Mounting to a Flat Surface
1 Use this Quick Start Guide template to mark the locations
for screw holes on the mounting surface. Use a 5mm drill bit
to drill approximately 25mm into the mounting surface.
2 Insert the anchors and mounting screws into the mounting
surface, leaving approximately 1/4” (6 mm) of the screw
heads protruding for the AP enclosure.
The screws should be approximately 3.25” (82.6mm) apart
per the template.
3 Insert the pin removal tool into the hole on the side of the
AP (
Figure 1.), to release the locking mechanism.
Figure 1. Insert the pin removal tool into the pinhole
4 Place the AP onto the mounting screws so that the screw
heads enter the mounting holes on the AP enclosure, and
push the AP (to the left or down depending on orientation)
to lock in place.
5 Remove the pin removal tool to release the lock mechanism
and secure the AP.
6 To unmount, insert the pin removal tool into the hole on the
side of the AP to unlock, then push the AP (to the right or up,
depending on orientation) to release the AP enclosure from
the mounting screws.
Mounting to a T-Bar
1 Orient the AP so that the T-bar is positioned between the T-
bar clips as shown in
Figure 2., then rotate the AP until the
third T-bar clip catches the T-bar and the latch locks the T-bar
in place (
Figure 3.).
Figure 2.
Figure 3.
2 For added physical security, use a Torx screwdriver to insert
the security screw into the hole shown in Figure 3.
3 To remove the unit, first remove the security screw, then
depress the latch while rotating the AP so that the T-bar clips
disengage the T-bar.
FOR MORE INFORMATION
For information on how to configure the AP from the Web
interface, refer to the Ruckus Wireless ZoneFlex Access Point
User Guide or the Online Help, available from within the
Web interface.
NOTE: If you will be using PoE, you will need a Cat 5e (or
better) Ethernet cable to connect the AP to the PoE injec-
tor or switch.
Hold pin removal tool
in while mounting
Download or browse on-line these Reference Manual for Ruckus Wireless ZoneFlex R300 Access points, Wireless Access Point.
Summary of Contents:
![]() |
[Page 1] Ruckus Wireless ZoneFlex R300 ZoneFlex TM Access Point Simple Network Management Protocol Release 100.0 Reference Guide Includes commands for ZoneFlex access points and wireless bridges Part Number 800-70860-001 Rev A Published March 2016 www.ruckuswireless.com |
![]() |
[Page 2] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 2 Copyright Notice and Proprietary Information Copyright 2016. Ruckus Wireless, Inc. All rights reserved. No part of this documentation may be used, reproduced, transmitted, or tr… |
![]() |
[Page 3] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 3 Contents About This Guide Documentation Feedback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Access Point MIB Changes in 10… |
![]() |
[Page 4] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 4 ruckusEventAPSerialNumber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 ruckusEventAPMacAddr . . . . . . . . . . . . . . . . . . . …. |
![]() |
[Page 5] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 5 Wireless Router Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Wireless Adapter Products . . . . . . . . . . . . . . … |
![]() |
[Page 6] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 6 Device WAN Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181 8 Access Point DHCP MIBs Imports . . . . . . . . . . . . … |
![]() |
[Page 7] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 7 Scalars and Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 Notification Types . . . . . . . . . . . . . . . . … |
![]() |
[Page 8] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 8 About This Guide This Ruckus Wireless ZoneFlex Access Point SNMP Reference Guide describes the SNMP Management Information Bases (MIBs) that ZoneFlex Access Points support. SN… |
![]() |
[Page 9] Ruckus Wireless ZoneFlex R300 About This Guide Access Point MIB Changes in 100.0 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 9 Access Point MIB Changes in 100.0 ZoneFlex Release 100.0 contains the following additions/changes to access point MIBs compare… |
![]() |
[Page 10] Ruckus Wireless ZoneFlex R300 About This Guide Access Point MIB Changes in 100.0 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 10 Product •ruckusR300 •ruckusR700 •ruckusR500 •ruckusR600 •ruckusT300 • ruckusT300E • ruckusT301N • ruckusT301S … |
![]() |
[Page 11] Ruckus Wireless ZoneFlex R300 About This Guide Access Point MIB Changes in 100.0 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 11 • ruckusWLANRogueInfo Radio • ruckusRadioNoiseFloor Device • ruckusDeviceMacAddr • ruckusDeviceIPAddr Root • ruckusC… |
![]() |
[Page 12] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 12 1 Access Point Event MIBs In this chapter: • Access Point Event MIB Group • Ruckus AP Event Objects This section describes ZoneFlex AP events and traps that are triggered wh… |
![]() |
[Page 13] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 13 Access Point Event MIB Group The ruckusZDEventTraps MIB tree contains events that trigger SNMP traps to be delivered to an … |
![]() |
[Page 14] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 14 OID 1.3.6.1.4.1.25053.2.1.1.2 Status current Objects ruckusEventClientMacAddr Description Triggered when there is a client … |
![]() |
[Page 15] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 15 Recommended actions No action required. ruckusEventConnectTrap MIB Name ruckusEventConnectTrap Events (tbd) Severity minor O… |
![]() |
[Page 16] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 16 OID 1.3.6.1.4.1.25053.2.1.1.26 Status current Objects ruckusEventClientMacAddr Description Triggered when there is an AP di… |
![]() |
[Page 17] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 17 ruckusEventFailApplconfTrap MIB Name ruckusEventFailApplconfTrap Events (tbd) Severity medium OID 1.3.6.1.4.1.25053.2.1.1.31… |
![]() |
[Page 18] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 18 Status current Objects ruckusEventClientMacAddr Description Trigger when the AP has failed to download configuration.The AP&… |
![]() |
[Page 19] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 19 ruckusEventAPTunDownTrap MIB Name ruckusEventAPTunDownTrap Events (tbd) Severity medium OID 1.3.6.1.4.1.25053.2.1.1.34 Statu… |
![]() |
[Page 20] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 20 Status current Objects ruckusEventClientMacAddr Description Trigger when the AP has failed to upgrade. The AP’s MAC add… |
![]() |
[Page 21] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 21 ruckusEventNoRecongTrap MIB Name ruckusEventNoRecongTrap Events (tbd) Severity medium OID 1.3.6.1.4.1.25053.2.1.1.37 Status … |
![]() |
[Page 22] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 22 Status current Objects ruckusEventClientMacAddr Description Trigger when command does not take effect. The AP’s MAC add… |
![]() |
[Page 23] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 23 ruckusEventDownloadSuccTrap MIB Name ruckusEventDownloadSuccTrap Events (tbd) Severity medium OID 1.3.6.1.4.1.25053.2.1.1.40… |
![]() |
[Page 24] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Access Point Event MIB Group ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 24 Status current Objects ruckusEventClientMacAddr Description Trigger when a configuration file is applied successfully. The A… |
![]() |
[Page 25] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Ruckus AP Event Objects ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 25 Ruckus AP Event Objects The objects in the following section are contained in the ruckusEventObjects tree and are used in traps … |
![]() |
[Page 26] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Ruckus AP Event Objects ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 26 Description OID of the error snmp-set. ruckusEventAPSerialNumber MIB Name ruckusEventAPSerialNumber OID 1.3.6.1.4.1.25053.2.1.2.3… |
![]() |
[Page 27] Ruckus Wireless ZoneFlex R300 Access Point Event MIBs Ruckus AP Event Objects ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 27 Description AP’s MAC address. ruckusEventContent MIB Name ruckusEventAPSerialNumber OID 1.3.6.1.4.1.25053.2.1.2.32 Syntax oc… |
![]() |
[Page 28] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 28 2 Access Point System MIBs In this chapter: • Imports • Groups • System Info • System Services The objects contained in the RUCKUS-SYSTEM-MIB.txt MIB file are used to se… |
![]() |
[Page 29] Ruckus Wireless ZoneFlex R300 Access Point System MIBs Imports ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 29 Imports ruckusCommonSystemModule FROM RUCKUS-ROOT-MIB TruthValue, DisplayString FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF … |
![]() |
[Page 30] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Info ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 30 System Info The ruckusSystemInfo MIB tree contains CPU and memory usage information. ruckusSystemCPUUtil SYNTAX INTEGER MAX-ACCESS read-only… |
![]() |
[Page 31] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Info ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 31 ruckusSystemFlashFreeSize SYNTAX INTEGER UNITS KByte MAX-ACCESS read-only STATUS current DESCRIPTION Flash free size in KBytes. OID ruc… |
![]() |
[Page 32] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Info ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 32 ruckusSystemtCPUSpeed SYNTAX Unsigned32 UNITS MHz MAX-ACCESS read-only STATUS current DESCRIPTION CPU Speed OID ruckusSystemInfo 5 rucku… |
![]() |
[Page 33] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Info ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 33 ruckusSystemtMemModel SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION Memory Model OID ruckusSystemInfo 7 ruckusSyst… |
![]() |
[Page 34] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Info ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 34 ruckusSystemMemSize SYNTAX Gauge UNITS KBytes MAX-ACCESS read-only STATUS current DESCRIPTION Total memory size in Bytes OID ruckusSystem… |
![]() |
[Page 35] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Services ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 35 System Services The ruckusSystemServices MIB tree contains objects used to configure system services such as HTTP, Telnet, SSH, Syslog,… |
![]() |
[Page 36] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Services ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 36 DEFVAL true OID ruckusSystemHTTPS 1 ruckusSystemTelnetStatus SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION Enable… |
![]() |
[Page 37] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Services ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 37 DEFVAL true OID ruckusSystemSSH 1 ruckusSystemBonjourStatus SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION Enable/… |
![]() |
[Page 38] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Services ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 38 DEFVAL true OID ruckusSystemSyslog 1 ruckusSystemSyslogServerIP SYNTAX OCTET STRING (SIZE (2..40)) MAX-ACCESS read-write STATUS curre… |
![]() |
[Page 39] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Services ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 39 ruckusSystemNTPStatus SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION Enable/disable NTP service. DEFVAL true OID vr… |
![]() |
[Page 40] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Services ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 40 ruckusSystemNTPActiveServer SYNTAX OCTET STRING (SIZE (1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION Active NTP server. OI… |
![]() |
[Page 41] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Services ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 41 MAX-ACCESS read-write STATUS current DESCRIPTION Config FlexMaster server URL. URL start with ‘http://’ or ‘https://&ap… |
![]() |
[Page 42] Ruckus Wireless ZoneFlex R300 Access Point System MIBs System Services ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 42 STATUS current DESCRIPTION Set factory default. DEFVAL true OID ruckusSystemCommands 2 ruckusSystemDHCPRenew SYNTAX TruthValue MAX-ACCE… |
![]() |
[Page 43] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 43 3 Ruckus Product MIBs In this chapter: • Imports • Scalars and Tables • Wireless Router Products • Wireless Adapter Products • Wireless Metro Products • Wireless Hot… |
![]() |
[Page 44] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Imports ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 44 Imports ruckusProducts FROM RUCKUS-ROOT-MIB ifIndex FROM IF-MIB TruthValue, DisplayString, MacAddress FROM SNMPv2-TC MODULE-IDENTITY FROM SNMPv2-SMI … |
![]() |
[Page 45] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Router Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 45 Wireless Router Products — VF2825 — 802.11b/g AP, 5 Ethernet ports, 8MB Flash, 32MB DRAM ruckusVF2825 OBJECT IDENTIFIER ::= { rucku… |
![]() |
[Page 46] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Metro Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 46 Wireless Metro Products — MM2225 — 802.11b/g Metro CPE, 5 Ethernet ports, 16MB Flash, 32MB DRAM ruckusMM2225 OBJECT IDENTIFIER ::= {… |
![]() |
[Page 47] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 47 Wireless Hotzone Products — ZF2925 — 802.11b/g AP, 5 Ethernet ports, 8MB Flash, 32MB DRAM ruckusZF2925 OBJECT IDENTIFIER ::= { ruc… |
![]() |
[Page 48] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 48 — ZF7363 — ruckusZF7363 OBJECT IDENTIFIER ::= { ruckusWirelessHotzoneProducts 13 } — ZF7341 — ruckusZF7341 OBJECT IDENTIFIER ::… |
![]() |
[Page 49] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 49 — ZF7782-S — ruckusZF7782S OBJECT IDENTIFIER ::= { ruckusWirelessHotzoneProducts 29 } — ZF7782-N — ruckusZF7782N OBJECT IDENTIF… |
![]() |
[Page 50] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 50 — ZF7351 — ruckusZF7351 OBJECT IDENTIFIER ::= { ruckusWirelessHotzoneProducts 48 } — ZF7742 — ruckusZF7742 OBJECT IDENTIFIER ::… |
![]() |
[Page 51] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 51 — ZF7781-FN-S — ruckusZF7781FNS OBJECT IDENTIFIER ::= { ruckusWirelessHotzoneProducts 62 } — SC8800-S-AC — ruckusSC8800SAC OBJ… |
![]() |
[Page 52] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 52 — T301S — ruckusT301S OBJECT IDENTIFIER ::= { ruckusWirelessHotzoneProducts 77 } — ZF7761CM — 802.11n Dual-Band Outdoor AP with … |
![]() |
[Page 53] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 53 ledAlternateMode1Mode2Mode6(4): Alternalte between modes 1 and 2 at a 30 second period and then go to mode 6 blueActive(5): Blue A… |
![]() |
[Page 54] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 54 DESCRIPTION «Enable/disable HTTP service.» DEFVAL { false } ::= { ruckusZF7761CMCustomization 1 } ruckusZF7761CMTelnetSer… |
![]() |
[Page 55] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 55 ruckusZF7761CMPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION «Speci… |
![]() |
[Page 56] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 56 SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION «Enable/disable Access Point heartbeat monitoring.» ::… |
![]() |
[Page 57] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 57 «Upstream Channel 2» ::= { ruckusZF7761CMUpstreamChannelsInfo 2 } ruckusZF7761CMUpstreamChannelIII OBJECT-TYPE S… |
![]() |
[Page 58] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 58 MAX-ACCESS read-only STATUS current DESCRIPTION «Down Channel 1» ::= { ruckusZF7761CMDownstreamChann… |
![]() |
[Page 59] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Hotzone Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 59 SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION «Down Channel 1» ::= { ruckusZ… |
![]() |
[Page 60] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 60 Wireless Controller Products — ZD1000 — Access Controller, 2 Ethernet ports, 32MB Flash, 64MB DRAM ruckusZD1000 OBJECT IDENTIFI… |
![]() |
[Page 61] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 61 ruckusZD1000SystemMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION «MAC Address» … |
![]() |
[Page 62] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 62 ::= { ruckusZD1000 6 } ruckusZD1000SystemSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCR… |
![]() |
[Page 63] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 63 «System name» ::= { ruckusZD1100 1 } ruckusZD1100SystemIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS… |
![]() |
[Page 64] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 64 DESCRIPTION «Model» ::= { ruckusZD1100 5 } ruckusZD1100SystemLicensedAPs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read… |
![]() |
[Page 65] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 65 STATUS current DESCRIPTION «Country code» ::= { ruckusZD1100 9 } ruckusZD3000SystemName OBJECT-TYPE SYNTAX DisplayStri… |
![]() |
[Page 66] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 66 MAX-ACCESS read-only STATUS current DESCRIPTION «Up time» ::= { ruckusZD3000 4 } ruckusZD3000SystemModel OBJECT-TYPE S… |
![]() |
[Page 67] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 67 SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION «Software version» ::= { ruckusZD3000 8 } ruckusZ… |
![]() |
[Page 68] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 68 ruckusZD5000SystemMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION «MAC Address» … |
![]() |
[Page 69] Ruckus Wireless ZoneFlex R300 Ruckus Product MIBs Wireless Controller Products ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 69 ruckusZD5000SystemSerialNumber OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION «Serial num… |
![]() |
[Page 70] Ruckus Wireless ZoneFlex R300 ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 70 4 Access Point WLAN MIBs In this chapter: • Imports • Groups • WLAN Table • WLAN Supported Transmit Rates • WLAN Supported Receive Rates • WLAN Station Statistics-Ha… |
![]() |
[Page 71] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs Imports ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 71 Imports ruckusCommonWLANModule FROM RUCKUS-ROOT-MIB RuckusAdminStatus, RuckusRadioMode, RuckusSSID, RuckusWEPKey, RuckusdB, RuckusWPAPassPhrase FR… |
![]() |
[Page 72] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs Groups ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 72 Groups ruckusWLANObjects OBJECT IDENTIFIER ::= { ruckusWLANMIB 1 } ruckusWLANInfo OBJECT IDENTIFIER ::= { ruckusWLANObjects 1 } ruckusWLANStaInfo O… |
![]() |
[Page 73] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 73 WLAN Table The WLAN table provides options for modifying an existing WLAN; WLAN creation is performed via the ruckusWLANRadioTable. ruckusWLAN… |
![]() |
[Page 74] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 74 ruckusWLANFragmentationThreshold INTEGER, ruckusWLANRadioMode RuckusRadioMode, ruckusWLANChannel INTEGE… |
![]() |
[Page 75] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 75 ::= { ruckusWLANEntry 1 } ruckusWLANBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION «This attribute is… |
![]() |
[Page 76] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 76 corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates tab… |
![]() |
[Page 77] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 77 «This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in … |
![]() |
[Page 78] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 78 SYNTAX INTEGER (256..2346) MAX-ACCESS read-write STATUS current DESCRIPTION «This attribute shall specify the current maximum size, in oct… |
![]() |
[Page 79] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 79 «Specifies the current operating channel.» ::= { ruckusWLANEntry 10 } ruckusWLANWDSEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS re… |
![]() |
[Page 80] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 80 «Enabled when 11g and 11b clients exist on the same network. none: Do not use any protection ctsOnly: AP will send a CTS frame prior to se… |
![]() |
[Page 81] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 81 SYNTAX INTEGER (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION «Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets fro… |
![]() |
[Page 82] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 82 MAX-ACCESS read-write STATUS current DESCRIPTION «Subopt-1 with format: 1: IF-Name:VLAN-ID:ESSID:AP-Model:AP-… |
![]() |
[Page 83] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Table ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 83 DESCRIPTION «Subopt-150 with VLAN-ID.» ::= { ruckusWLANEntry 53 } ruckusWLANOption82Subopt151 OBJECT-TYPE SYNTAX … |
![]() |
[Page 84] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Supported Transmit Rates ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 84 WLAN Supported Transmit Rates ruckusWLANSuppDataRatesTxTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANSuppDataRatesTxEntry M… |
![]() |
[Page 85] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Supported Transmit Rates ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 85 MAX-ACCESS not-accessible STATUS current DESCRIPTION «Index object that identifies which data rate to access.» ::=… |
![]() |
[Page 86] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Supported Receive Rates ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 86 WLAN Supported Receive Rates ruckusWLANSuppDataRatesRxTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANSuppDataRatesRxEntry MAX… |
![]() |
[Page 87] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Supported Receive Rates ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 87 STATUS current DESCRIPTION «Index object which identifies which data rate to access.» ::= { ruckusWLANSuppDataRates… |
![]() |
[Page 88] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 88 WLAN Station Statistics-Hardware ruckusWLANStaStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANStaStatsEntry MAX-ACCES… |
![]() |
[Page 89] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 89 ruckusWLANStaStatsRxNoPrivacy Counter32, ruckusWLANStaStatsRxWEPFail Counter32, ruckusWLANStaStatsRxDemicFail Counter32, … |
![]() |
[Page 90] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 90 MAX-ACCESS read-only STATUS current DESCRIPTION «station SSID.» ::= { ruckusWLANStaStatsEntry 2 } ruckusWLANSta… |
![]() |
[Page 91] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 91 SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION «Rx unicast frames.» ::= { ruckusWLANStaStatsE… |
![]() |
[Page 92] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 92 ruckusWLANStaStatsRxNoPrivacy OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION «Rx with … |
![]() |
[Page 93] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 93 ruckusWLANStaStatsRxDefrag OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION «Rx defragme… |
![]() |
[Page 94] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 94 ::= { ruckusWLANStaStatsEntry 17 } ruckusWLANStaStatsTxMulticastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only … |
![]() |
[Page 95] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 95 «Tx (re)association failures» ::= { ruckusWLANStaStatsEntry 21 } ruckusWLANStaStatsTxAuth OBJECT-TYPE SYNTAX Co… |
![]() |
[Page 96] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Statistics-Hardware ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 96 DESCRIPTION «Total Tx and Rx data bytes of last 5 min period.» ::= { ruckusWLANStaStatsEntry 25 } ruckusWLANSta… |
![]() |
[Page 97] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Information ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 97 WLAN Station Information ruckusWLANStaTable OBJECT-TYPE SYNTAX SEQUENCE OF RuckusWLANStaEntry MAX-ACCESS not-accessible STATUS cu… |
![]() |
[Page 98] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Information ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 98 ruckusWLANStaIpaddr OCTET STRING, ruckusWLANStaAuthMode OCTET STRING } ruckusWLANStaAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS… |
![]() |
[Page 99] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Information ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 99 DESCRIPTION «Specifies station state.» ::= { ruckusWLANStaEntry 4 } ruckusWLANStaCapInfo OBJECT-TYPE SYNTAX Unsigned32 … |
![]() |
[Page 100] Ruckus Wireless ZoneFlex R300 Access Point WLAN MIBs WLAN Station Information ZoneFlex Access Point 100.0 SNMP Reference Guide, 800-70860-001 Rev A 100 STATUS current DESCRIPTION «Specifies station idle time.» ::= { ruckusWLANStaEntry 8 } ruckusWLANStaRates OBJECT-TYPE … |